Wireless Noise Sensor

LD-NS/A is designed to measure the noise in the environment. The sensor supports the international EnOcean standard (ISO/IEC14543-3-10) and can be seamlessly interworked with other intelligent building systems (KNX BACnet, etc.). It is usually used with a gateway to check the noise level of the environment. When the noise is too high, the system generates

Wireless PM Sensor

LD-PM/F is designed to measure and report levels of PM1, PM2.5, PM10. This device is wireless, powered by the DC 5-24V line power. The sensor can also be used for smoke detection, with the alarm to achieve smoking alarm. The sensor is small and can be held in place with glue or screws, it will

Wireless Repeater

Wireless repeaters based on EnOcean technology transmit EnOcean wireless signals between sensors and receivers, and are used to solve the problem of relaying signals when sensors are installed out of range, or in complex installation environments. The device communication complies with ISO/IEC 14543-3-1X.

Wireless Door Lock Sensor

Wireless VOC Sensor

EasySens® NOVOS 3 SR x

Energy-harvesting wireless room operating unit in the NOVOS design for the integrated measurement of temperature and relative humidity (rH version) in living and office spaces as well as controls through operating elements such as set point and occupancy button. The device is mounted using the adhesive pad or screws included and transmits its values unidirectionally

EasySens® STC65+ RS485 Modbus

Bidirectional gateway with RS485 Modbus interface for integration of up to 32 EasySens® devices. Freely programmable 32 channels allow for a bidirectional communication with 32 addresses (registers) and SAB+/SAB05 wireless valve actuators for example. The STC65+ RS485 Modbus includes an ext. transmitting/receiving antenna (2.5 m).

EasySens® STC65+ RS485 Modbus

Bidirectional gateway with RS485 Modbus interface for integration of up to 32 EasySens® devices. Freely programmable 32 channels allow for a bidirectional communication with 32 addresses (registers) and SAB+/SAB05 wireless valve actuators for example. The STC65+ RS485 Modbus includes an ext. transmitting/receiving antenna (2.5 m).

EasySens® STC65+ RS485 EVC

Bidirectional gateway with serial RS485 interface and IP65 enclosure for integrating up to 64 EasySens® sensors or wireless switches into a network. Transmission of field-programmable telegrams to max. 127 addresses. The gateway includes an ext. transmitting/receiving antenna (2.5 m).

EasySens® STC-KNX UP

Flush-mounted bidirectional gateway for EasySens® sensors to integrate into a KNX network with a maximum of 8 channels. The STC-KNX UP offers logical control blocks, which can be configured for: switching and dimming lights, blinds up/down, presence, set point adjustment, fan stages, humidity sensor, window handle/contact, binary input, light and motion.