Eltako RS485 Bus energy meters MQTT Gateway via WLAN FGW14W-IP; MQTT and REST-API

Gateway with IP interface for Series 14 energy meters via WLAN. Bidirectional. Only 0.8 watt standby loss. Operation only possible with the wireless antenna module FAM14.

Eltako RS485 bus two-way three-phase meter DSZ14DRSZ-3x80A MID with display, MID approval

RS485 bus two-way three-phase meter. Maximum current 3×80 A. Standby loss 0,8 W at L1 and only 0,5 W at L2 and L3 each. Operation only possible with the wireless antenna module FAM14.

Eltako RS485 bus actuator for shading elements and roller shutters 12-24 V DC motor FSB14/12-24V DC

Switch actuator for shading elements and roller shutters for one 12-24 V DC motor. 1+1 NO contact 4 A/12-24 V DC, potential free from power supply 12 V. Bidirectional. Only 0.1 watt standby loss. Operation only possible with the wireless antenna module FAM14.

Eltako RS485 bus wireless actuator PWM dimmer switch FRGBW14 for LED

PWM dimmer switch with 4 channels for LED 12-24 V DC, each up to 4 A. Adjustable minimum brightness and dimming speed. With snooze function and light alarm circuit. Additionally with light scene control via Professional Smart Home controller or with wireless pushbuttons. Standby loss only 0.1 watt. Operation only possible with the wireless antenna

Eltako RS485 bus DALI gateway for rail mounting FDG14

RS485 bus DALI gateway for DIN-EN 60715 TH35 rail mounting, bidirectional. Only 1 watt standby loss. Operation only possible with the wireless antenna module FAM14.

Eltako RS485 bus actuator 2-channel impulse switch with integrated relay function with active power measurement FSR14M-2x

2-channel impulse switch with integrated relay function and active power measurement. 1+1 NO contacts potential free 16 A/250 V AC, 230 V LED lamps up to 600 W, incandescent lamps 2000 watts. Bidirectional. Only 0.9 watt standby loss. Operation only possible with the wireless antenna module FAM14.

Eltako wireless antenna FAG55E-

Wireless antenna in the housing for single mounting 80x80x15mm or mounting into the E-Design55 switching system. With 100 cm cable.

(IAQ) Wireless Indoor Air Quality Monitor & Data Logger

Wireless indoor air quality controller with screen provides customers with visual indoor air quality readings, such as PPM1.0, PPM2.5, PPM10, CO2, temperature, humidity, TVOC, etc. It can control the HVAC system directly. For example: Adjust the fan speed, control air supply / exhaust，set mode and other functions. It is widely used in residential, commercial and

Wireless Room Temperature / Humidity Sensor

Solar-powered sensors, with an intelligent transmission management, are used to measure the room temperature and room rH, and transmit this information wirelessly using the non-proprietary EnOcean wireless protocol. Special indoor solar cells collect the power required for operation and data transfer from ambient light. In unlit periods, maintenance-free gold-cap capacitors continue to feed the transmitter

Building Management Smart Edge Server

The Enocean Smart Edge Server is a full Building Management System with Web Connectivity, integration, graphics, and supervisory control. Smart Edge Server is a physical device where FIN Framework or FIN Stack is running to monitor and control building/s. Additionally to that, FIN Edge2Cloud is provided for secure remote access with no requirement for a