ALADIN EnO receiver, 2-channel / 12V / 300767

For light / ventilation and general controls 2-channel radio receiver (12V) for switching low voltage equipment, lighting and other electrical consumers. Each channel can be individually controlled with div. ALADIN transmitters and assigned with different functions and parameters (up to 90 different settings). Several transmitters with different functions can be stored on the same channel.

ALADIN EnO heating recipient, 1-channel / potential-free / 230V / 300683

For heaters and cooling 1-channel radio receiver (potential-free) for controlling heating and cooling systems and other electrical consumers. The receiver can be controlled via an ALADIN radio thermostat or multisensors and assigned different functions and parameters (up to 30 different settings). For a quick system test, control via radio pushbuttons is also possible. The teach-in

Wireless Switch

LD-AS is a wireless switch with relays that uses EnOcean wireless communication. The switch can be installed in a concealed box, connected to zero-fire wire, and comes in three models with 1, 2, and 3 relays. The switch can be paired with an EnOcean wireless passive switch, and control can also be achieved through the

ALADIN EnO DALI control, broadcast / 300505

For DALI controls for lighting The ALADIN EnO DALI Controller (DALI Master) switches and dims lighting via DALI bus with commands from ALADIN transmitter. The controller is controlled via ALADIN wireless pushbuttons, motion detectors, door contacts, etc. (all work without wiring and without battery). Up to 18 DALI operating devices (slaves) can thus be controlled

ALADIN EnO blinds receiver / 230V / 300631

For controlling blinds, shutters, awnings Blinds radio receiver for controlling blinds, shutters, awnings and other electrical consumers (1 motor). The receiver can be individually controlled with div. ALADIN transmitters and assigned with different functions and parameters (up to 45 different settings). Several transmitters (also with different functions) can be assigned to the receiver. The teach-in

ALADIN EnO receiver, 1-channel / potential-free / 230V / 300613

For light / ventilation and general controls 1-channel radio receiver (potential-free) for switching lighting and other electrical consumers. The receiver can be individually controlled with various ALADIN transmitters and assigned different functions and parameters (up to 90 different settings). Several transmitters with different functions can be stored on the same channel. The teach-in is done

ALADIN EnO receiver, 2-channel / 230V / 300621

For lighting / ventilation and general controls. 2-channel radio receiver for switching lighting and other electrical consumers. Each channel can be individually controlled with div. ALADIN transmitters and assigned different functions and parameters (over 90 different settings). Several transmitters with different functions can be stored on the same channel. The teach-in is done in a

ALADIN EnO receiver, 1-channel / 230V / with cabeling input / 300611

For lighting / ventilation and general controls.   1-channel radio receiver with extension input (for pushbuttons/switches) for switching lighting and other electrical consumers. The receiver can be individually controlled with div. ALADIN transmitters and assigned with different functions and parameters (up to 90 different settings). Several transmitters with different functions can be stored on the

EnOcean radio transmitter 4-channel, le jaune vif (4320W), series LS

EnOcean radio transmitter The JUNG radio transmitters with EnOcean technology have an NFC module. That simplifies the configuration, as they integrate the smart switches with this wireless interface. 4-channel including mounting plate, adhesive film and fastening screw Intended use Radio transmitter for the transmission of switching, dimming or shutter commands to radio receivers of the

EnOcean radio transmitter 2-channel, le jaune vif (4320W), series LS

EnOcean radio transmitter The JUNG radio transmitters with EnOcean technology have an NFC module. That simplifies the configuration, as they integrate the smart switches with this wireless interface. 2-channel including mounting plate, adhesive film and fastening screw Product characteristics Intended use Mounting on flush box with dimensions according to DIN 49073, screw fixing on walls or