SED-KCS Key card switch

The key card switch saves energy through occupancy based control of lighting, HVAC, and miscellaneous electric loads. The switch is self-powered, and inserting or removing the card generates sufficient kinetic energy to send a wireless signal to other EnOceanbased devices within the room. Guests simply insert their key card in the slot when they enter

SED-WMS Wall mounted occupancy sensor

The wall mounted sensor is wireless and self-powered making it one of the most cost-effective ways to control energy-use in unoccupied rooms. The device can be installed in minutes as they are wireless and do not require batteries. The device harvests solar energy from indoor light and uses radio frequency technology to communicate wirelessly with

SED-CMS Ceiling mounted occupancy sensor

The ceiling mounted sensor enables a new level of energy saving control for rooms, hallways, and other common areas. The sensor uses radio frequency technology to communicate wirelessly with other EnOcean-enabled devices to scale back temperature and turn-off lights when a space is unoccupied for a set period of time. The sensor is self-powered by

SED-WDS Window and door contact sensor

The device can be easily mounted on any standard door or window frame to enable occupancy based control of lighting, HVAC, and miscellaneous electric loads. The sensor uses radio frequency technology to communicate wirelessly with other EnOceanbased devices whenever it detects a door or window has been opened or closed. The sensor is completely self-powered

SED-3R and SED-5R Light relay receivers

The relay receiver controls lights or other loads by responding to EnOcean signals from self-powered wireless light switches and/or other compatible transmitters. The relay receiver mounts to junction box knockout holes or inside wiring cavities for maximum wireless range.

SA1 – FEM – UP

Switch actuator for switching from lamps, palpation dimmers, plug sockets, doors and other consumers. It possesses a change-over switch floating, which make possible a  direct switching of an external voltage. Functions already integrated are scolded, impulse-scolded (key follower switches), beep-switches or minuterie-scolded.

EE4 – FEM – UP

Receiving unit, 4-channels; receives and transfers signals.

HS – SA8 – FEM

The switch-actuator 8-fold serves for scolded from eight independent loads such as lamps, plug sockets udgl. By means of a separate software program the optional functions can be parameterized.

HS – JA4 – FEM

The blinds-actuator 4-fold serves for scolded from four independent drives such as blinds, garage gates udgl. By means of a separate software program the optional functions can be parameterized.

RBLF – FSE

The battery-free radio occupancy-detector is equipped with a solar generator and an integrated brightness feeler. It sends a switching on telegram and a telegram of the current brightness value immediately with recognizing a person. During the presence phase every 10 minutes the current brightness value for superordinate controls is sent. During a certain time if