Seco Transceiver

Receiving EnOcean wireless signals and converting to wire signals to SECO’s controller. Receiving signals from controller and converting to EnOcean wireless signals to be transmitted.

Seco BACnet Gateway

It converts EnOcean data to wire BACnet signals which achieves multi-protocol parsing and data processing.

Seco Network Intelligent Controller

Multi-Protocols conversion between RS484, Modbus, BACnet, LON, Wi-Fi and Z-wave Generic software platform, easily access to variety of applications Reliability, easy maintenance, cost effectiveness Control relays/air conditioning units from web dashboard

Seco Thermostat

It is used to control most of the wall-mounted air conditioning, especially for hotel, commercial, family and other places

Seco App

Seco App.

SED-T00 and SED-TH0 Temperature sensors with humidity option

These temperature and relative humidity sensors provide a reliable and simple method to set up intelligent automation of interior spaces for energy savings. These sensors are suitable for Variable Volume Temperature (VVT) or Variable Air Volume (VAV) forced air systems. The device is capable of operating up to 200 hours in darkness from maximum charge

SED-TS0 and SED-THS Temperature and humitdy sensors with setpoint

These temperature and relative humidity sensors provide a reliable and simple method to set up intelligent automation of interior spaces for energy savings. These sensors are suitable for Variable Volume Temperature (VVT) or Variable Air Volume (VAV) forced air systems. The device is capable of operating up to 200 hours in darkness from maximum charge

SED-THF Temperature and humidity sensor with setpoint and fan speed control

These temperature and relative humidity sensors provide a reliable and simple method to set up intelligent automation of interior spaces for energy savings. These sensors are suitable for Variable Volume Temperature (VVT) or Variable Air Volume (VAV) forced air systems. The device is capable of operating up to 200 hours in darkness from maximum charge

SED-P120 Plug-in light relay

The plug-in relay receiver provides ON/OFF control of lamps and other devices. Operation involves plugging the cord of an electrical device into the receiver, and then plugging the receiver into a standard electrical outlet. The device can be controlled using self-powered wireless light switches or sensors.

SED-LLS Light level sensor

This photo sensor provides a reliable and simple method to increase energy savings by adding daylight harvesting to your wireless lighting control system. The device controls a single lighting controller or groups of controllers for switching or dimming zone control in relation to the natural light contribution in the area. Batteries are not required due