z.B. Europa, China

EasySens® SR07

Energy-harvesting wireless room sensor for measuring temperature in residential and commercial buildings. The SR07 transmits its measured values unidirectionally to compatible EasySens® receiving actuators or gateways, which forward the information to a BMS controller. It can be integrated into a wide range of common switch ranges and frames, allowing you to choose from many designs

Radio Temperature Room Sensor FT

Application Determination of the actual ambient temperature and adjustment of the reference value for the room temperature. Description The room temperature sensor FT transmits the actual ambient temperature as well as the reference room temperature via the integrated EnOcean® wireless module to the single room temperature controller CosiTherm® Wireless or to the AFRISOhome gateway. The

Wireless smoke alarm ASD 20

For detection of fumes and smoke gas in living spaces. Audible alarm when a defined smoke concentration is exceeded. Also sends battery status.

mTRONIC Multisensor with intelligent burglary detection

The mTRONIC Multisensor is used to show the status of windows, doors, and large-scale units. With the intelligent burglary detection the Multisensor can automatically detect if a burglar tries to lift up the sash form a window. To do so, a permanent magnet with dimensions Ø5×5 mm is installed opposite the mTRONIC multisensor. The permanent magnet

ecosCom581 – Wireless interface, EnOcean (EY-CM581)

Bi-directional wireless communication interface for SAUTER room automation controllers „ecos“; EnOcean TCM300; SAUTER Local Communication (SLC) protocol with RS-485. Part of the SAUTER modulo system family Bidirectional wireless communication according to EnOcean (ISO/IEC 14543-3-10) Internal, optimised wireless antenna (no BNC antenna necessary) Integration of EnOcean devices: SAUTER ecoUnit110 room sensor and ecoUnit146 room operating unit and other

ecoUnit146 & ecoUnit106 – Room operating unit with push-button unit, EnOcean (EY-RU146 & EY-SU106)

Wireless room operating unit EY-RU146 with temperature sensor, LCD display, setpoint adjuster, fan, occupancy, window blinds, 4 buttons, 2 additional PTM-buttons extended with push-button unit EY-SU106, 6 additional PTM-buttons For ecoUnit106 (EY-SU106): Part of the SAUTER modulo system family Integrated solar cell for additional solar panel supply of ecoUnit 1 EnOcean devices Push-button unit to supplement the

TCM 515 – Transceiver Module for Gateways, Actuators and Controllers

The TCM 515 product family enables the realization of transceiver gateways, actuators and controllers for systems communicating based on the EnOcean radio standard. Compared to the current TCM 300 generation, TCM 515 provides significantly reduced power consumption, smaller size and higher processor performance. Security processing including is fully integrated without the need for external components.

STM 300 – Bi-directional Wireless Sensor Module

STM 300, STM 300U and STM 400J feature an energy harvesting interface for the implementation of self-powered products. The minimal standby power consumption makes it especially suitable for energy harvesting wireless solutions such as bidirectional temperature sensors, sensors in building services and innovative actuators. Technical information and more detailed infromation on: STM 300 (868 MHz

DynaTemp DD CR-BX

The DDC „CR-BX“ is used for central room temperature control. The actuators are connected to the control unit via the C-bus room modules. The integrated web server allows access to the system via a PC and standard web browser (e.g. Mozilla Firefox). The parameters (e.g. nominal temperature and time profiles) of the system can be

DynaTemp DD CR-BS

The control unit DDC „CR-BS“ is used for central temperature setback with the help of thermostats with liquid sensor. The thermostats „Uni LHZ“ or „Uni FHZ“ respectively room thermostats (item no. 1152052/72) are connected to the control unit via the C-bus room modules. The integrated web server allows access to the system via a PC