Eltako Wireless infrared converter with USB port FIW-USB

Wireless infrared converter with USB port for the universal remote control Logitech Harmony Touch (available from specialist retailers). Only 0.05 watt standby loss. With a special Eltako FIW data record, the infrared signals are converted into wireless telegrams by a wireless infrared converter FIW-USB and transmitted to the Eltako wireless network. Either connect to a

Eltako Wireless window/door contact with solar cell FTK-

Wireless window/door contact with solar cell 75 x 25 x 12 mm. Adhesive foil mounting. Protection class IP54, therefore suitable for outdoor mounting.

Eltako Wireless pushbutton 55 x 55 mm without wire F4T55B-

Wireless 4-way pushbutton for single mounting 80 x 80 x 15 mm or mounting in the 55 mm switch system. Whisper quiet and with battery (lifetime 2-5 years).

Eltako Wireless repeater pure white glossy FRP65/230V-wg

2 level wireless repeaters in the housing for single mounting 84 x 84 x 30 mm. Only 0.8 watt standby loss.

Eltako Wireless motion/brightness sensor in E-Design65 FBH65/12V DC-wg

Wireless motion/brightness sensor pure white glossy for surface mounting 84 x 84 x 39 mm or mounting into the E-Design65 switching system. Power supply with a 12 V DC power supply unit. Only 1 mW standby loss.

Eltako Wireless motion/brightness sensor in E-Design65 FBH65S/12V DC-wg

Wireless motion/brightness sensor pure white glossy for surface mounting 84 x 84 x 39 mm or mounting into the E-Design65 switching system. Power supply with the integrated solar cell or a 12 V DC power supply unit. Only 1 mW standby loss.

Eltako Wireless module FGM

Wireless module for fitting in the 3xAA battery compartment of gongs or any other plastic housing. Only 0.5 watt standby loss.

Eltako Wireless outdoor motion/brightness sensor FABH130/230V-rw

Wireless outdoor motion/brightness sensor pure white, 130 x 85 x 100 mm, protection class IP55. 1 NO contact not potential free 10 A/250 V AC, incandescent lamps 2300 Watt. Power supply 230 V. Only 0.9 watt standby loss. The wireless sensor can be taught in the actuators listed below and in Professional Smart Home controller: FSR14, FSR61, FSR71.

Eltako Wireless actuator Socket switching actuator with current measurement FSVA-230V-10A

1 NO contact not potential free 10 A/250 V AC, 230 V LED lamps and ESL up to 400 W, incandescent lamps up to 2000 watts. With integrated current measure­ment up to 10 A. Encrypted wireless, bidirectional wireless and repeater ­function are ­switchable. Only 0.8 watt standby loss.

Eltako Wireless actuator Socket universal dimmer switch FSUD-230V

Universal dimmer switch, 300 W power MOSFET. Automatic lamp ­detection. Only 0.7 watt standby loss. With adjustable minimum brightness. With ­switching operation for children’s rooms and snooze function. Encrypted wireless, bidirectional wireless and repeater ­function are ­switchable.