AL-431-00-921 EnoSense® WALL+DESK / KOREA – EnOcean Sensor for desksharing

This small EnOcean sensor is powered by its integrated solar cell and supplies its measured values at configurable intervals. The sensor, which is snapped into a housing, is attached with a double-sided adhesive pad, preferably on the table top at a corner of the workstation. Depending on the colour of the desk, the sensor is

AL-602-04-921 EnoPuck® CO2 WALL / KOREA – EnOcean CO2 sensor and LED display

EnoPuck CO2 WALL: The CO2 traffic light “EnoPuck CO2” has been supplemented with a mounting ring for the wall and the appropriate holders on the device especially for front wall mounting. In addition, the power supply is provided via a twin stranded wire, which is routed out of the back of the device, instead of

AL-602-04-921 EnoPuck® CO2 WALL / TAIWAN – EnOcean CO2 sensor and LED display

EnoPuck CO2 WALL: The CO2 traffic light “EnoPuck CO2” has been supplemented with a mounting ring for the wall and the appropriate holders on the device especially for front wall mounting. In addition, the power supply is provided via a twin stranded wire, which is routed out of the back of the device, instead of

AL-512-01-921 white / TAIWAN, EnoDisc® EnOcean radio receiver and transmitter

The EnoDisc® is an EnOcean transceiver for smart spaces that communicates via Ethernet and is powered via PoE (Power Over Ethernet). The three-part housing consisting of base, lower part with RJ45 or LSA connection and cover with the electronics allows easy installation. As soon as a connection has been established via port 8424, the EnoDisc®

AL-436-00-921 EnoSense® People Counter / TAIWAN – EnOcean People counting

This easy-to-install sensor for counting people passing by is powered by two AA batteries and transmits its data wirelessly with every counting event. The sensor is attached to the door frame above the door, preferably on the hallway side, using a double-sided adhesive pad (included). Depending on the color of the door frame, the sensor

AL-436-00-921 EnoSense® People Counter / KOREA – EnOcean People counting

This easy-to-install sensor for counting people passing by is powered by two AA batteries and transmits its data wirelessly with every counting event. The sensor is attached to the door frame above the door, preferably on the hallway side, using a double-sided adhesive pad (included). Depending on the color of the door frame, the sensor

AL-512-01-921 EnoDisc® / KOREA, EnOcean radio receiver and transmitter

The EnoDisc® is an EnOcean transceiver for smart spaces that communicates via Ethernet and is powered via PoE (Power Over Ethernet). The three-part housing consisting of base, lower part with RJ45 or LSA connection and cover with the electronics allows easy installation. As soon as a connection has been established via port 8424, the EnoDisc®

AL-602-02-868 EnoPuck® CO2 WALL / CE – EnOcean CO2 sensor and LED display

EnoPuck CO2 WALL: The CO2 traffic light “EnoPuck CO2” has been supplemented with a mounting ring for the wall and the appropriate holders on the device especially for front wall mounting. In addition, the power supply is provided via a twin stranded wire, which is routed out of the back of the device, instead of

AL-602-01-868 EnoPuck® CO2 / CE – EnOcean CO2 sensor and LED display

The “EnoPuck CO2” CO2 traffic light can be used both as a stand-alone solution and in conjunction with a building automation system. Unlike many other solutions, the bright RGB LEDs make the light signal clearly visible at all times, even from a greater distance. The CO2 measured value is measured and displayed in the individual

AL-440-00-868 EnoSense® NOISE / CE – EnOcean Sound level meter

Our new sensor for measuring the sound pressure level on site normally works energy self-sufficiently via the integrated solar cell when there is sufficient light. The EnoSense® NOISE transmits its current measured values every 4 minutes. To provide the best possible support for maintenance and diagnostics, it also delivers all relevant energy values to the