e.g. EU, Non-EU Europe, China, Singapure, …

EnOcean Signal Monitoring Tool

ST-01 is a device used to design sufficient EnOcean signal coverage in buildings. The device captures messages from which the following can be determined sender ID, message type, signal strength, information about messages forwarded by a repeater and the time between messages being sent. Individual messages can be saved in ‘Data logger‘ mode to a USB drive in

SW1-RFH8 – Wireless Batteryless Control Station

+Wireless batteryless control station – One operator +868MHz operating frequency for european market The control station is available with different housing materials, defined by the model code. Each product is supplied under the model format SW1Y-XXX-RFH8, where Y specifies the housing type: Y = 1: Chrome-plated Zamak housing Y = 4: Plastic housing The SW1-RFH8

EnOcean radio wall-transmitter module with rocker 2g. imprint K.5 aluminium matt

EnOcean radio wall-transmitter module with rocker 2g. imprint Q.x anthr. Velvety

RCU EnOcean

The RCU EnOcean room control unit combines state-of-the-art technology and maximum efficiency for controlling single and multi-room solutions. In combination with the Stella Pro EnOcean, it enables intelligent room control – without the need for a gateway (flywheel). Thanks to its integrated solar cell, the RCU is energy self-sufficient and maintenance-free. Its easy integration into

SBDb – Lighting Control Unit for DALI – CAN

The SBDb is a control unit for managing lighting via DALI (Digital Addressable Lighting Interface) within a CAN (Controller Area Network) system. It supports occupancy-based and daylight-compensated lighting control, helping to save energy.

SBEb – Gateway Enocean/CAN

With SBEb connected to Lindinvent’s CAN bus, battery-free and wireless limit switches can activate an interlock function that temporarily suspends normal climate control when windows or similar openings are detected. Switches are wirelessly linked via SBEb and assigned to a specific room climate control system based on zone allocation. Up to 16 switches can be

SW2-RFH8 – Wireless batteryless control station

+Wireless batteryless control station – Two operators +868MHz operating frequency for european market The control station is available with different housing materials, defined by the model code. Each product is supplied under the model format SW2Y-XXX-RFH8, where Y specifies the housing type: Y = 1: Chrome-plated Zamak body Y = 4: Plastic body The SW2-RFH8

AMWRFH8 – Wireless Batteryless Limit Switches

Wireless batteryless limit switch RFH8 transmitter with 868 MHz operating frequency for European market The AMWRFH8 platform supports multiple actuator configurations, allowing selection of the appropriate actuator depending on the required mechanical interface. Each configuration is supplied under the model series AMWXXXRFH8, where XXX identifies the selected actuator type (for extended actuator codes, the same

ECW – Wireless Batteryless Control Units – 868MHZ

Wireless batteryless pushbuttons with 868 MHz operating frequency for European market applications ECW platform consists of a range of metal or plastic 22 mm pushbutton devices available in multiple operator/head styles (standard pushbuttons, mushroom, joystick, selector, etc.) and panel-free fixing options. Devices generate and transmit RF signals at 868 MHz without the need for batteries