Smart Repeater

M9-USR-RPT  Wireless Repeater which receives telegrams and re-sends them to enhance and increase the signal distance from the transmitter to the receiver. Typically a repeater will be used when the sensor has been mounted too far from the receiver or there are obstacles between the sensor and receiver which diminishes the signal.

0-10V Lighting Control Module (metering & temp)(LM)

The M9-USR-LM offers bi-directional, ON/OFF and 0-10V dimming control when combined with a wireless light switch or automatic shut-off when combined with a wireless occupancy sensor.

1 Channel Lighting Relay (USR-L3)

The M9-USR-L3 Lighting Control Module responds to a variety of wireless EnOcean devices to control and dim LED drivers, fluorescent ballasts, or other switchable loads. The Mx-USR-L3 offers bi-directional, ON/OFF and 0-10V dimming control when combined with a wireless light switch or automatic shut-off when combined with a wireless occupancy sensor. Additionally, the Lighting Control

Magnum USB Stick

M9-USB  The Magnum USB stick enabled with a radio module for over-the-air configuration or a Magnum eBox (Mx-EBOX) for configuration over Ethernet / WIFI.

Room Control Module

M9-RBW  Solar-powered room control module with LCD and controls, with smart communication management for measuring room temperature and for wireless transmission of measured values, occupancy, setpoint and weekly schedule. The Mx-RBW supports the EnOcean radio standard ISO/IEC 14543-3-10 for direct communication with the Mx-D15 radio small actuator or an EnOcean gateway. It uses EEP D2-10-01*

PWM LED Dimming Module

M9-OPUS-PWMLV  The Magnum Energy Solution’s PWM LED Dimming Control Module, through the use of thousands of PWM dimming steps, creates what is perceived by the natural eye as a single continuous dim, even at extremely low light levels.

In-Fixture Lighting Node (10V12)

The Mx-OPUS-10V12 is compatible with 0-10V, dim-to-off LED drivers. The device is powered through available low voltage from the driver or an available 12-15VDC source.

Wireless Occupancy Sensor (wall-mounted)

M9-EOSW  The wall-mounted occupancy sensor saves energy and adds convenience by accurately detecting when an area is occupied or vacant.

Wireless Occupancy Sensor (ceiling mounted)

M9-EOSC (ceiling mounted)  The ceiling-mounted occupancy sensor saves energy and adds convenience by accurately detecting when an area is occupied or vacant.

Window / Door Sensor

M9-EDWS  The Magnum Door / Window Sensor helps provide energy savings for an area by detecting when a door or window opens or closes. It is a wireless solar-powered sensor that can be used on its own to detect the open and closed status of entry doors or windows, or it can be paired with