z.B. Europa, China

EasySens® SR04 CO2

Wireless room sensor for measuring CO2, temperature and optionally relative humdity in residential and commercial buildings. Mounted directly on the wall using the adhesive pad or screws included, the NOVOS 3 SR Temp transmits its measured values to EasySens® receiving actuators or gateways, which process the information directly or – depending on the application –

EasySens® SR65 VFG

Energy-harvesting wireless contact sensor for measuring temperature on ducts/pipes.The SR65 VFG can be configured via airConfig software to customized measurement ranges, transmission intervals and wake-up times. When used in dark places, a backup battery can be inserted.

EasySens® SR65 TF

Energy-harvesting wireless cable sensor for measuring temperature in gaseous media in heating, ventilation and air-conditioning systems. The SR65 TF can be configured via airConfig software to customized measurement ranges, transmission intervals and wake-up times. When used in dark places, a backup battery can be inserted.

EasySens® SR65 AKF

Energy-harvesting wireless duct sensor for the measurement of temperature in gaseous media of heating, ventilation and air-coditioning systems. The SR65 AKF can be configured via airConfig software to customized measurement ranges, transmission intervals and wake-up times. When used in dark places, a backup battery can be inserted.

EasySens® SR65

Energy-harvesting wireless sensor for measuring temperature in outdoor areas or industrial environments (for example in cold stores, production halls and warehouses). The airConfig software can be used to parameterize the SR65 to customized measurement ranges, transmission intervals and wake-up times. When used in dark places (e.g. server rooms), a backup battery can be inserted.

EasySens® SR07 x

Energy-harvesting wireless room operating unit for the measurement of temperature and relative humidity (rH version) in living and office spaces. Also available with set point potentiometer, slide switch (for example ‚Day/Night‘) or occupancy button. The device transmits its values unidirectionally to receiving actuators or gateways, which process the information directly or – depending on the

EasySens® SR07

Energy-harvesting wireless room sensor for measuring temperature in residential and commercial buildings. The SR07 transmits its measured values unidirectionally to compatible EasySens® receiving actuators or gateways, which forward the information to a BMS controller. It can be integrated into a wide range of common switch ranges and frames, allowing you to choose from many designs

Radio Temperature Room Sensor FT

Application Determination of the actual ambient temperature and adjustment of the reference value for the room temperature. Description The room temperature sensor FT transmits the actual ambient temperature as well as the reference room temperature via the integrated EnOcean® wireless module to the single room temperature controller CosiTherm® Wireless or to the AFRISOhome gateway. The

Wireless smoke alarm ASD 20

For detection of fumes and smoke gas in living spaces. Audible alarm when a defined smoke concentration is exceeded. Also sends battery status.

mTRONIC Multisensor with intelligent burglary detection

The mTRONIC Multisensor is used to show the status of windows, doors, and large-scale units. With the intelligent burglary detection the Multisensor can automatically detect if a burglar tries to lift up the sash form a window. To do so, a permanent magnet with dimensions Ø5×5 mm is installed opposite the mTRONIC multisensor. The permanent magnet