z.B. Europa, China

JEEDOM – Jeedom Atlas EnOcean home automation controller + ZOOZ Z-Wave dongle

Jeedom Atlas: more power, more memory, more stability! JEEDOM ATLAS is the 4th generation of home automation box integrating Jeedom software. It has been developed on the basis of experience and user feedback. JEEDOM ATLAS is equipped with the latest technologies to deliver a home automation system that’s fast, reliable and long-lasting. With its 6-core

GCE Stand-alone energy manager Ecodevices RT2

The Ecodevices RT energy manager helps you keep track of your energy consumption. From a single interface you can monitor your water, electricity and gas consumption. Consumption tracking Track your electricity, water, gas and fuel consumption, as well as the output of your photovoltaic panels, easily and with just 1 device. Control your heating, optimize hot water

GCE EnOcean extension for IPX800 V4

With X-ENO, you can integrate wireless, battery-free EnOcean switches and magnetic sensors into the IPX800V4 world. The data from these can be interpreted in the IPX800V4 and used to automate various actions. X-ENO is not a stand-alone device. Its functions can only be accessed via an IPX800V4. From the IPX800V4 interface, you can add up

GCE ELECTRONICS – Teleinfo module and 2 EnOcean pulse counters

The RF Pulse allows the transmission, via EnOcean technology, of the indexes of 2 pulse meters as well as various information from the electricity meter, thanks to customer remote information (historical and standard mode). Equipped with EnOcean technology, the RF Pulse is compatible with home automation boxes and devices supporting the EnOcean A5-12-00 profile. The

ENOCEAN USB gateway with SBA connector

EnOcean controller with SMA antenna offset The USB310 is the brand-new USB gateway with a female SMA connector. The USB310 lets you connect your computer or home automation box to the Enocean world. This standard connector is designed to connect an 868MHz antenna specially designed for the Enocean radio frequency, enhancing the product’s radio performance.

TRIO2SYS – 1-button roller shutter switch

This switch transmitter is wireless, battery-free and therefore maintenance-free. Completely autonomous, it sends a radio signal thanks to the energy released when one of its buttons is pressed. Switch transmitters can be placed anywhere in the room and changed at will. They can be mounted on a wall using either screws or adhesive tape. This

TRIO2SYS – Double shutter switch

The switch transmitter is wireless, battery-free and virtually flat. Completely autonomous, the switch sends a radio signal using the energy released when the ON and OFF buttons on the transmitter switch are pressed, with no maintenance required. Combined with a receiver and a light sensor, it can be used to remotely control a range of

TRIO2SYS – White 1-button waterproof switch

TRIO2SYS – Outdoor switch transmitter IP55 EnOcean The switch transmitter is wireless, battery-free and waterproof in its IP55 housing. Completely AUTONOMOUS, the switch sends a radio signal thanks to the energy released when the ON and OFF buttons on the transmitter switch are pressed, with no maintenance required. Combined with a receiver, it can be used

TRIO2SYS – Modular 1-channel LED receiver with EnOcean metering

Modular 1-channel LED receiver with EnOcean counter The switch receiver 1 channel modular is used to receive radio signals from switch transmitters or from EnOcean sensors. Designed for the switching of lighting loads type LED and compact fluorescent, it can also switch resistive loads (halogen), fluorescent tubes, halogen lamps low-voltage with transformer ferromagnetic and electronics, contactors power or small motors. The receiver switch 1 channel is equipped with the function „ repeater „ as well as as the function „ consumption indicator „. FUNCTIONS : 1-channel 1.5A receiver module EnOcean technology Remote control of lighting/appliances ON/OFF function Supports any type of load Up to 32 transmitters can be assigned (switches, presence detectors, or magnetic window

TRIO2SYS – 4-channel modular LED receiver with EnOcean metering

Modular 4-channel LED receiver with EnOcean counter The receiver switch 4 channels modular is used to receive radio signals from transmitters switch or from EnOcean sensors. Designed for the switching of lighting loads type LED and compact fluorescent, it can also switch resistive loads (halogen), fluorescent tubes, halogen lamps low-voltage with transformer ferromagnetic and electronic, contactors power or small motors. The receiver switch 4 channels is equipped with the function „ repeater „ as well as the function „ indicator of consumption „. FUNCTIONS : 4-channel 1.5A receiver module 4 control channels in 1 single module EnOcean technology Remote control of lighting/appliances ON/OFF function Supports all types of load Up to 32 transmitters can be assigned (switches, presence detectors,