Eltako Wireless tubular motor, torque 20 Nm, speed 14/min, whisper mode 5/min FRM60M20

Wireless tubular motors 230 V/115 W for steel shafts SW60, torque 20 Nm, speed 14/min, with adapter set, bearing and whisper mode. The wireless tubular motors have a total length of 526 mm. The motors are fitted with blind protection and a noiseless soft brake.

Eltako Wireless multi sensor in E-Design55 FMS55ESB-

Wireless multi sensor for single mounting 80 x 80 x 14 mm or mounting into the E-Design55 switching system. With integrated solar cell and battery CR 1632 (not included in the scope of supply).

STM 550 – Multisensor Module (868 MHz)

STM 550 enables the realization of energy harvesting wireless sensors communicating based on the EnOcean radio standard. Key applications are wall-mounted or equipment-mounted sensor applications for the measurement of temperature, humidity, illumination or acceleration / orientation.

Eltako Wireless pushbutton tracker, without wire FTTB

Wireless pushbutton tracker with battery (lifetime 5-8 years). 55 x 44 mm, 15 mm high. Weighs only 20 grams. The wireless pushbutton tracker FTTB has a blue pushbutton to send normal pushbutton telegrams. After opening the housing (grasp into the joint and prise apart), switch the tracker on by shifting the slide switch to the

Eltako Wireless window/door contact FFKB-

75 x 25 x 12 mm, with battery ­(lifetime 7 years). Magnet 37 x 10 x 6 mm. On opening and closing, the related tele­gram is send twice in short succession. The current status telegram is sent cyclically every approx. 8 minutes. ­Attach by bonding.

Eltako Wireless keyswitch, without wire, aluminium/black FSTAP-al/sz

Wireless keyswitch for surface mounting 70 x 70 x 43 mm. Die cast aluminium, black front, protection class IP44. Euro profile cylinder lock with 2 keys. Battery lifetime 3-5 years. No standby loss. No external power supply required, so no connecting wire. An internal 3 V CR2032 battery supplies power for ­several years. To change

Eltako Wireless bell pushbutton without battery or wire FKD-

Wireless bell pushbutton 80 x 40 x 15 mm with energy generator. Protection class IP54. Generates the energy for radio telegrams by pushing the button, therefore without connecting cable and no stand-by loss. Labeling field 43 x 12 mm. For example for Dymo label tape 9 mm and 12 mm. The radio bell pushbutton transmits

Eltako Wireless 4-way handheld transmitter without battery or wire, with double rocker, aluminium/anthracite-soft FHS4-al/anso

Wireless 4-way handheld transmitter with rocker aluminium/anthracite-soft, 49 x 47 mm, 16 mm high. Weighs only 37 grams. Generates the power for wireless telegrams itself when the button is pressed, therefore there is no battery.

Eltako Wireless 2-way handheld transmitter without battery or wire, with rocker, aluminium/anthracite-soft FHS2-al/anso

Wireless 2-way handheld transmitter with rocker aluminium/anthracite-soft, 49 x 47 mm, 16 mm high. Weighs only 37 grams. Generates the power for wireless telegrams itself when the button is pressed, therefore there is no battery.

Eltako Wireless rotary switch in E-Design55 FDT55EB-

Wireless 1-way rotary switch in E-Design55, 80 x 80 mm external dimensions, internal frame ­dimensions 55 x 55 mm, 25 mm high. With battery (lifetime 2-8 years).