Omnio flush mounted universal dimmer 1-channel UPD230/10
The Omnio flush mounted universal dimmer 1-channel UPD230/10 with extension input is a device for dimming LED luminaires and other electrical loads. Thanks to automatic load recognition (R/L/C) the dimmer selects the right operating mode as well as the ideal dimming curve for the connected light source. Up to 50 Omnio radio transmitters can be programmed. Each transmitter can be assigned a function, for example dim with rocker-switch, dim with push-button, staircase light, predefined dim value, step-switch (AW20), timer (AW23/24/25), soft on/off, programmable scenes or presence simulation. Nondimmable loads are automatically switched at zero crossing. Conventional push-buttons connected to the extension input are permanently assigned the function dimming with key. Bidirectional communication, EEP D2-01-03, ARCO ready (AWAG Remote Commissioning). In addition this actuator can be used as repeater in case of range issues. Suitable for flush mounted sockets.
- Product No. 3210 000
- Manufacturer AWAGhttp://www.awag.ch/
- Category Actuator / Relay Receiver, Receivers & Controllers
- Frequency 868MHz (ASK): EU (and potentially others e.g. Non-EU Europe, China,…)
- RX-EEP D2-01-03
- Certification Certified 2.0