e.g. Japan

Wireless relay for 100V (manufactured by Suwasansha Denki Co., Ltd.)

Wireless relay compatible with EnOcean devices By using switches and sensors that use EnOcean wireless modules in combination, it becomes possible to directly control AC100V devices such as lighting and ventilation fans. The shape conforms to the power supply embedded mounting frame and outlet mounting brackets for use in Japan, making installation and construction easy.

Receiver (4-point output/16-point output)

Receives and outputs EnOcean wireless signals This unit receives an EnOcean wireless signal and outputs it. When it receives a wireless signal from a pre-registered EnOcean wireless sensor, it outputs 4 relays or 16 open collectors. It can be used to replace switches and sensors commonly found on factory lines and other FA sites with

Contact input transmission unit

Achieve EnOcean wireless communication without modifying the system This unit receives contact input and transmits EnOcean wireless signals. It receives signals from sensors with contact output and transmits EnOcean wireless signals. Existing devices such as switches and sensors that are commonly seen on factory lines and other FA sites can be used as is or

Distance Sensor

Ideal for managing coin locker usage The distance to the target is measured based on the time it takes to emit a laser beam and receive its reflection. The measurement distance varies depending on the installation environment, but it can measure up to 2000 mm. Accurate and fast distance measurement is possible without being affected

Water Leak Sensor

No wiring required, easy to install in existing systems When a leak is detected, data is output via EnOcean wireless communication. In addition to on-site alerts, by connecting to a gateway, alerts can be sent via email or LINE, and data can be stored. The sensor detects a line rather than a point, allowing for

Temperature Sensor

Ideal for hygiene management of refrigerators/freezers in line with HACCP This temperature sensor can measure a wide range of temperatures, making it an ideal product for the introduction of HACCP, which will be mandatory for all food-related businesses from 2021. Two sensor sections are connected, making it possible to simultaneously control the temperature of two

CO₂ Sensor

Effectively avoids crowding and is ideal for ventilation systems A CO₂ sensor unit that measures temperature, humidity, and carbon dioxide concentration. It complies with the “Guidelines for the Selection of Carbon Dioxide Concentration Measuring Devices” established by the Ministry of Economy, Trade and Industry. Battery life is approximately 10 years The main power source is

Current sensor (Pressac)

The Pressac sensing V3 wireless three channel CT clamp is designed to measure and report the AC current flowing in three separate channels. Powered from any of the measured conductors, the measured current in all three channels is reported every 30 seconds. The Pressac sensing V3 wireless three channel CT clamp is easily installed with

Magnet Contact Sensor – EMCSJ (OEM)

EMCSJ is an energy-harvesting wireless magnet contact sensor for EnOcean systems. Powered by a solar cell, EMCSJ works absolutely maintenance-free. An integrated energy store allows operation for several days in total darkness. In dark surroundings, a coin cell battery can be retrofitted. The small housing can easily be mounted to windows or door frames or

Thumb Turn Air (Shibutani)

Introducing a new thumb turn type that is compatible with various locks This thumbturn incorporates wireless communication technology that does not require a power source. The locking signal can be sent using electricity generated by rotating the thumbturn. In addition to barrier-free toilets, which have seen an increase in demand in recent years, it can