e.g. EU, Non-EU Europe, China, Singapure, …

Eltako Wireless repeater pure white glossy FRP65/230V-wg

2 level wireless repeaters in the housing for single mounting 84 x 84 x 30 mm. Only 0.8 watt standby loss.

Eltako Key card switch in E-Design65 FKF65-wg

Wireless card switch for surface mounting 84 x 84 x 29 mm. Generates the power for wireless telegrams itself when the button is pressed, therefore there is no connecting wire and no standby loss.

Eltako Wireless pull switch in E-Design65 FZS65-wg

Wireless pull switch for surface mounting 84 x 84 x 24 mm. With silver and red handle. Generates the power for wireless telegrams itself when the button is pressed, therefore there is no connecting wire and no standby loss. When the handle is pulled and released, a wireless telegram is sent to the Eltako ­wireless network. The scope of supply

Eltako Wireless motion/brightness sensor in E-Design65 FBH65/12V DC-wg

Wireless motion/brightness sensor pure white glossy for surface mounting 84 x 84 x 39 mm or mounting into the E-Design65 switching system. Power supply with a 12 V DC power supply unit. Only 1 mW standby loss.

Eltako Wireless motion/brightness sensor in E-Design65 FBH65S/12V DC-wg

Wireless motion/brightness sensor pure white glossy for surface mounting 84 x 84 x 39 mm or mounting into the E-Design65 switching system. Power supply with the integrated solar cell or a 12 V DC power supply unit. Only 1 mW standby loss.

Eltako Wireless actuator Socket switching actuator FSSA-230V

1 NO contact not potential free 10 A/250 V AC, 230 V LED lamps and ESL up to 400 W, incandescent lamps up to 2000 watts. Encrypted wireless, bidirectional wireless and repeater function are ­switchable. Only 0.8 watt standby loss.

Eltako Wireless module FGM

Wireless module for fitting in the 3xAA battery compartment of gongs or any other plastic housing. Only 0.5 watt standby loss.

Eltako Data transformer for Series 71 DAT71

Data transformer to configure Series 71 ­actuators using the PCT14 PC tool.

Eltako Wireless actuator Socket switching actuator with current measurement FSVA-230V-10A

1 NO contact not potential free 10 A/250 V AC, 230 V LED lamps and ESL up to 400 W, incandescent lamps up to 2000 watts. With integrated current measure­ment up to 10 A. Encrypted wireless, bidirectional wireless and repeater ­function are ­switchable. Only 0.8 watt standby loss.

Eltako Wireless actuator PWM Dimmer Switch for LED FRGBW71L

PWM dimmer switch with 4 channels for LED 12-36 V DC, each up to 2 A. Adjustable minimum brightness and dimming speed. With snooze function and light alarm circuit. Additionally with light scene control via PC or with wireless pushbuttons. Activation for encrypted wireless, bidirectional wireless and repeater function. Standby loss only 0.3-0.5 watt.