Echo-Echoflex Interface

The Unison Echo-Echoflex Interface allows for wireless communication between Unison Echo® and Echoflex control systems. When it’s not practical to run wires between every device in your building’s control system, the Echo-Echoflex Interface is the solution. Using the built-in 902 MHz radio the Echo-Echoflex Interface can transmit wireless signals to any Echoflex control device within

Split Duplex Controller

The ERNR Split Duplex Receptacle Outlet Controller provides a simple solution to meet energy codes without requiring complex changes to a facility. The controller offers a split duplex receptacle with a 15-amp relay-switched outlet and a 15-amp constant-power outlet. Its auxiliary output allows for additional standard outlets to be controlled by its internal relay. ASHRAE

USB Cubicle Sensor

Echoflex’s ERUSB-CC is a wireless Passive Infra-Red (PIR) occupancy sensor and switch in a small package perfect for cubicle switch station.

RCU EnOcean

The RCU EnOcean room control unit combines state-of-the-art technology and maximum efficiency for controlling single and multi-room solutions. In combination with the Stella Pro EnOcean, it enables intelligent room control – without the need for a gateway (flywheel). Thanks to its integrated solar cell, the RCU is energy self-sufficient and maintenance-free. Its easy integration into

SBDb – Lighting Control Unit for DALI – CAN

The SBDb is a control unit for managing lighting via DALI (Digital Addressable Lighting Interface) within a CAN (Controller Area Network) system. It supports occupancy-based and daylight-compensated lighting control, helping to save energy.

SBEb – Gateway Enocean/CAN

With SBEb connected to Lindinvent’s CAN bus, battery-free and wireless limit switches can activate an interlock function that temporarily suspends normal climate control when windows or similar openings are detected. Switches are wirelessly linked via SBEb and assigned to a specific room climate control system based on zone allocation. Up to 16 switches can be

Water Leak Sensor

Water Leak Sensor (A9-WLDS) can be installed anywhere water could leak, i.e. hot water heater or basement. It will trigger when detecting leaking water. With this sensor you can avoid loss before it floods. When the device is secure included into EnOcean network, above communication will be encrypted. Feature: Water leak sensors are used to

BMWE75RFH9

Battery-free wireless transmission limit switch Adjustable metal rod (3X3mm) – IP66 – EN50041 RFH9 contact with 902MHz transmission frequency for the US market

BMWE91RFH9

Battery-free wireless transmission limit switch Stainless steel spring multidirectional actuator – IP66 – EN50041 RFH9 contact with 902MHz transmission frequency for the US market

BMWE92RFH9

Battery-free wireless transmission limit switch Multidirectional actuator in nylon on stainless steel spring – IP66 – EN50041 RFH9 contact with 902MHz transmission frequency for the US market