Omnio Room Sensor RTF161
The Omnio room sensor RTF- 161 is a battery less, maintenance-free and wireless sensor to measure temperature (0…40 °C) and humidity (0…100 %rH) indoors. The temperature can be set with its operation elements (set point). It is able to transmit temperature, humidity and set point via radio to Omnio thermostat actuators and gateways. The RTF-
Omnio Room Sensor RTF160
The Omnio room sensor RTF- 160 is a battery less, maintenance-free and wireless sensor to measure temperature (0…40 °C) and humidity (0…100 %rH) indoors. The measured value is transmitted wireless to Omnio thermostat actuators and gateways. The RTF160 is characterised by its excellent long-term stability and thanks to the built in solar cell it is
Omnio flush-mounted multi switching actuator 2-channels UPS230/12
The Omnio flush-mounted multi switching actuator 2-channels UPS230/12 is a device for switching electrical loads. Its two potential free outputs are able to be actuated from up to 50 Omnio radio transmitters. Each transmitter can be programmed with one out of twenty different functions such as switch, push-button, staircase lighting, step-switch (AW20), time controlled switch
Omnio Window Handle FG201
The Omnio window handle FG201 is a battery less, maintenance-free and wireless transmitter to monitor the state of windows. It is able to detect the state „window opened“, „window closed“ and „window tilted“. This handle has no lock and it can be mounted instead of the normal window handle.
Omnio window contact 1-channel FK101
The Omnio window contact FK101 1-channel is a battery-less and maintenance-free radio transmitter to monitor the condition of windows and doors. Typical application examples can be to turn off the heating while windows are open or to raise the blinds when sliding door opens. The window contact FK101 consists of a transmitter module driven by
Omnio handheld transmitter 4-channels R101
The Omnio handheld transmitter 4-channels R101 is a universally applicable battery-less and maintenance-free wireless switch with four independent individual keys. Due to its highly ergonomic shape it rests comfortably in ones hand. The power comes from a small energy converter based on the induction principle.
Omnio Key-Card-Switch 1-channel KSM
The Omnio key card switch 1-channel KSM is a self-powered and maintenance-free radio transmitter. It can be used as a main switch for lighting, heating and blinds in hotel-, school- and conference rooms as well as in offices. To fix with screws or adhesive pad.
Omnio wall mounted transmitter 4-channels WS-102
The Omnio wall mounted transmitter 4-channels WS-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line. To install with screws or adhesive foil. Optional mounting plates allow mounting in different combinations.
alphaEOS Guard
alphaEOS Guard warns you from fires through optical detection using the scattered light principle. Once a fire is detected, a loud signal is broadcast in an 0,5 second interval. Together with the alphaEOS system, a warning message is also sent to your smartphone.
Oil-Water Warning Device ÖWWG 3
Applications For visual and audible alarms if liquids with a flash point of > 55 °C are detected in, for example, oil storage rooms, drip pans, inspection ducts, ducts, protective pipes, manholes, pipes and cellars. Suitable for the following media: water, fuel oil, diesel fuel or low-viscosity lubricating oils, motor oils, hydraulic oils, vegetable oils