NODON – EnOcean pilot wire heating module

Intelligent control of electric radiators with pilot wire The EnOcean Pilot Wire Heater Module is easy to install on all pilot wire electric radiators, making them smart and connected. It is EnOcean 3.0 certified and can be controlled by a controller, an opening or motion detector, or a compatible home automation system. Thanks to its

TRIO2SYS – ODACE-compatible EnOcean double shutter switch

Dual EnOcean switch, SCHNEIDER ODACE design The switch transmitter is wireless and battery-free. It is completely autonomous and sends a radio signal using the energy released when the ON and OFF buttons on the transmitter switch are pressed. It requires no maintenance. It eliminates tedious back-and-forth wiring. It can be placed anywhere in the room

TRIO2SYS – ODACE-compatible EnOcean single shutter switch

EnOcean single switch, SCHNEIDER ODACE design The switch transmitter is wireless and battery-free. It is completely autonomous and sends a radio signal using the energy released when the ON and OFF buttons on the transmitter switch are pressed. It requires no maintenance. It eliminates tedious back-and-forth wiring. It can be placed anywhere in the room

TRIO2SYS – EnOcean wall switch 1 button compatible ODACE

EnOcean single switch, SCHNEIDER ODACE design The switch transmitter is wireless and battery-free. It is completely autonomous and sends a radio signal using the energy released when the ON and OFF buttons on the transmitter switch are pressed. It requires no maintenance. It eliminates tedious back-and-forth wiring. It can be placed anywhere in the room

NODON Micro Smart Plug EnOcean (Prise FR)

NODON® EnOcean Micro Smart Plug The NodOn® Micro Smart Plug EnOcean® lets you switch on or off any device connected to it. Based on a totally innovative design, the NodOn® Micro Smart Plug EnOcean® is one of the world’s smallest smart plugs, and is fully CE certified. Combined with a home automation system, the NodOn®

NODON EnOcean PIR Motion Sensor

Compatible with the EnOcean® worldwide Smart Home & Smart Building protocol, this EnOcean® Motion Sensor will automatically detect any motion. It can be used on standalone mode or with a home automation gateway. Thanks to its multiple mounting possibilities, place it anywhere in your house (on a table, a wall or a ceiling) and customize

NODON EnOcean dual switch micromodule

Micromodule 2 EnOcean loads The NodOn® flush-mounted module can be controlled via an EnOcean®-compatible home automation system, or directly via other EnOcean® controllers such as the Soft Remote, wall switch or NodOn® card reader. Mounted behind your existing wired switch or in the ceiling, the NodOn® flush-mounted module makes it very easy to make your

ENOCEAN EnOcean Pi 868MHz RF module

Connect your Raspberry Pi to the EnOcean world! The EnOcean Pi board is an extension board that connects directly to the GPIO connector on a Raspberry Pi board, creating an EnOcean gateway. It is powered directly by the Raspberry Pi board and therefore requires no external power supply. The system is based on TCM 310

Presence detector, DALI, EnOcean®, master, 12 m, flat, for flush mounting, white

Presence detector, DALI daylight control for flush-mounting in ceilings of 2.4 – 3 m. Standalone or as master combinable with a maximum of 10 secondary detectors and can be controlled via EnOcean. For use in offices, schools, conference rooms… in large and small spaces. The detector has a maximum of 3 daylight controlled zones, and

Base for a wireless dimmer switch, 71 x 71 mm, screw fixing

Base with screw fixing for mounting a wireless dimmer switch (for Hue system, EnOcean®, Bluetooth® and KNX®). You can click it together and combine it with one or more flush-mounting mechanisms from Niko. This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.