U10 USB Network Interface

U10 FT connects directly to LON TP/FT-10 Free Topology (FT) Twisted Pair (ISO/IEC 14908-2) channels through a removable connector and is fully compatible with LON link-powered channels. You can use U10 FT with the SmartConnect Edge Server software and with any OpenLDV-compliant application including the IzoT Commissioning Tool, OpenLNS Commissioning Tool, LonMaker Integration Tool, LonScanner

Receiver for Signal Watcher NE-GW001A

The Japanese company Inaba Denki Sangyo has developed a wireless sensor based on EnOcean technology, allowing easy monitoring of the status of machines and equipment in factories. The Signal Watcher is attached to signal lamps and transmits the following information:Light ON / Blinking / Light OFF Features of the Signal Watcher The Signal Watcher is

Receiving USB module USB400J

USB 400J is an EnOcean transceiver module with gateway controller software and USB interface. It can be directly connected to PC’s or smart home servers. USB 400J provides bidirectional EnOcean radio protocol to devices with USB interface. Radio messages are sent and received through a virtual serial interface.

Temperature Sensor Module STM431J

The extremely power saving RF transmitter module STM 431J of EnOcean is optimized for realization of wireless and maintenance free temperature sensors, or room operating panels including set point dial and occupancy button with a minimum number of external components. The module provides an integrated calibrated temperature sensor. The module is programmable with custom firmware

Magnetic Contact Module STM 429J

The extremely power saving RF transmitter module STM 429J from EnOcean enables the realization of wireless magnet contact sensors. Powered by a solar cell it works absolutely maintenance-free.

STM 400J

STM 400J features an energy harvesting interface for the implementation of self-powered products. The minimal standby power consumption makes it especially suitable for energy harvesting wireless solutions such as bidirectional temperature sensors, sensors in building services and innovative actuators. STM 400J can be powered by a solar cell, available in two sizes – ECS 300

EnOcean Gateway Development Kit

A sensor module / development tool. Intended for gateway development. Specifically mentioned it can be combined with “Armadillo” ARM+Linux CPU board to build an EnOcean gateway.

O3 Edge

The O3-EDGE-Coordinator is a part of every Echoflex Lighting Control system. It receives instructions (events) from Echoflex control stations and schedulers, the Echoflex scheduler, and even BACnet, then delivers them to the designated Echoflex relay or dimmer, so your fixtures always have the right look. The O3-EDGE-Sensor gathers input from Echoflex sensors and interfaces and shares that

Echo-Echoflex Interface

The Unison Echo-Echoflex Interface allows for wireless communication between Unison Echo® and Echoflex control systems. When it’s not practical to run wires between every device in your building’s control system, the Echo-Echoflex Interface is the solution. Using the built-in 902 MHz radio the Echo-Echoflex Interface can transmit wireless signals to any Echoflex control device within

Split Duplex Controller

The ERNR Split Duplex Receptacle Outlet Controller provides a simple solution to meet energy codes without requiring complex changes to a facility. The controller offers a split duplex receptacle with a 15-amp relay-switched outlet and a 15-amp constant-power outlet. Its auxiliary output allows for additional standard outlets to be controlled by its internal relay. ASHRAE