Seco Wireless Vibration Sensor

Ultra low power consumption, battery-less and no cables, only 1.3uA current consumption 50 Lux illuminations can work normally. Fully charged can standby more than 7 days in total dark environment Vibration monitoring can detect slope, angle, and send alarm signals Heart-rate transmission

Seco Wireless Windows Contact Sensor

The wireless self-powered sensor can be used to detect the open and closed status of doors or windows, or it can be paired with an occupancy sensor to accurately detect whenever someone enters or exit room.

Seco Occupancy Sensor

The wireless ceiling-mounted occupancy sensor can save energy and adds convenience by accurately detecting when an area is occupied or vacant. It is wireless, self-powered, and uses a passive infrared sensor to detect motion. In the meanwhile, it transmits EnOcean radio message to lighting, HVAC to use energy more efficiently.

Seco Electric Energy Meter

The device directly interfaces to your existing metering infrastructure (oil, gas, electric, heat) via either optical or wired connector. Features: Transforming your existing meters into "smart meters" Recording electricity factor and power consumption in real time Table or graphic statistic analysis Fully EnOcean compliant

SED-LC347D Lighting load controller with 0-10V dimming output

The load controller is a versatile control device used for applications such as ON/OFF lighting, timed light switch, daylight harvesting, photo inhibit, and occupancy or vacancy based lighting control. Other vertical market applications include process control and hospitality applications. The controller supports radio range confirmation, which allows installers to test signal strength for optimal sensor

SED-LC347 Lighting load controller 120/277/347VAC

The load controller is a versatile control device used for applications such as ON/OFF lighting, timed light switch, daylight harvesting, photo inhibit, and occupancy or vacancy based lighting control. Other vertical market applications include process control and hospitality applications. The controller supports radio range confirmation, which allows installers to test signal strength for optimal sensor

SED-LC277 Lighting load controller 24VAC-277VAC

The load controller is a versatile control device used for applications such as ON/OFF lighting, timed light switch, daylight harvesting, photo inhibit, and occupancy or vacancy based lighting control. Other vertical market applications include process control and hospitality applications. The controller supports radio range confirmation, which allows installers to test signal strength for optimal sensor

SED-LLS Light level sensor

This photo sensor provides a reliable and simple method to increase energy savings by adding daylight harvesting to your wireless lighting control system. The device controls a single lighting controller or groups of controllers for switching or dimming zone control in relation to the natural light contribution in the area. Batteries are not required due

SED-P120 Plug-in light relay

The plug-in relay receiver provides ON/OFF control of lamps and other devices. Operation involves plugging the cord of an electrical device into the receiver, and then plugging the receiver into a standard electrical outlet. The device can be controlled using self-powered wireless light switches or sensors.

SED-THF Temperature and humidity sensor with setpoint and fan speed control

These temperature and relative humidity sensors provide a reliable and simple method to set up intelligent automation of interior spaces for energy savings. These sensors are suitable for Variable Volume Temperature (VVT) or Variable Air Volume (VAV) forced air systems. The device is capable of operating up to 200 hours in darkness from maximum charge