z.B. USA, Canada

Lighting Node (HBKOD)

In fixture DALI lighting controller with digital PIR and ambient light sensing for daylight harvesting applications as well as occupancy detection.

Lighting Node (HBKO10V)

When the device is connected to 0-10V dim-to-off drivers, it enables any lighting manufacturer to deliver simple, fully connected fixtures.

In-Fixture Lighting Node (DRDLV)

The M9-OPUS-DRDLV provides for bi-directional, fixture level wireless DALI (digital addressable lighting interface) lighting control integration.

In-Fixture Lighting Node (DRD)

The M9-OPUS-DRD provides for bi-directional, fixture level wireless DALI (digital addressable lighting interface) lighting control integration.

Thermostat Control Board

The MTB1 is a unit mounted HVAC controller. It accepts inputs from a variety of wired and wireless room monitoring components to form a complete room subsystem.

Wireless Motion / Lux Sensor

The M9-ML2 is a wireless, self powered, passive infrared sensor that ensures reliable detection of occupant presence, and is ideally suited for occupancy-based lighting control.

Integrated Light Switch

The Magnum Energy line of Wall Switch Receivers work in conjunction with EnOcean-enabled Self-Powered Wireless Lighting Control Products to provide and optimal solution for the retrofit lighting needs. These wireless products combine Magnum’s switching technology with self-powered and wireless technologies, developed and licensed from EnOcean. The Wall Switch Receiver can be installed in place of

Plug-In Switch Module

The Magnum Plug-In Switch Module provides an easy way to save energy and control lighting and appliance loads based on room occupancy. The module simply plugs into any standard wall receptacle and receives wireless signals from Magnum compatible products that tell it when to power on or off.

Wireless Key Card Switch

The wireless key card switch communicates wirelessly with compatible devices in a guest room when a key card is inserted or removed from the slot to determine occupancy.

HVAC Setback Module

The Magnum HVAC Setback Module is a simple way to save energy by switching HVAC units between normal and setback modes. It is low voltage, mounts easily in a typical HVAC enclosure, and communicates wirelessly with Magnum occupancy detection and lighting control products.