Stay in touch and subscribe to our newsletter.
TCM 615 – Transceiver Module for Gateways, Actuators and Controllers
Friday, 24 July 2026
by
TCM 615 is the latest generation of EnOcean Transceivers. It enables the realization of transceiver gateways, actuators and controllers for systems communicating based on the EnOcean radio standard. Compared to previous generations, TCM 615 provides much higher computation power, more memory for feature-rich applications and a significantly reduced power consumption. It supports the latest EnOcean
BSC EnOcean 3.0 Reference Design
Thursday, 01 September 2022
by
The BSC EnOcean 3.0 reference design is the heart of maintenance-free, secure IoT sensors. It enables cost-effective direct integration of an EnOcean 3.0 wireless interface with microprocessor into customer-specific wireless sensors. The reference design is designed for lowest power consumption in stand-by mode to realize maintenance-free end products. Due to the compact design, ultra-flat sensor
Wireless Switch Module
Tuesday, 12 April 2022
by
The ZF 2 way radio switch module is designed for use in wireless switches and remote controls without batteries. It can be used in building technology for light and shutter control or in industrial automation. The wireless switch module enables radio communication with EnOcean receivers and operates via radio according to the EnOcean Alliance Radio
PTM 215J – Wireless Switch Module with NFC (928 MHz)
Wednesday, 16 June 2021
by
PTM 215J is a miniaturized batteryless switch module (40 mm x 40 mm x 11.2 mm) which allows the realization of a very slim, on-wall mountable rocker switches or remote controls. Product comes with NFC interface for commissioning and encryption mode with transmission of the sequence counter “RLC” in every telegram. For details see: https://www.enocean.com/en/products/enocean_modules_928mhz/ptm-215j/
PTM 215U – Wireless Switch Module with NFC (902 MHz)
Wednesday, 16 June 2021
by
PTM 215U is a miniaturized batteryless switch module (40 mm x 40 mm x 11.2 mm) which allows the realization of a very slim, on-wall mountable rocker switches or remote controls. Product comes with NFC interface for commissioning and encryption mode with transmission of the sequence counter “RLC” in every telegram. For details see: https://www.enocean.com/en/products/enocean_modules_902mhz/ptm-215u/
PTM 202 – Toggle Switch Transmitter Module (868 MHz)
Wednesday, 16 December 2020
by admin_gutschik
The toggle switch transmitter module PTM 202 enables the setup of intuitive and easy to use self-powered switches. PTM 202 module is powered by an electro-dynamic generator and therefore maintenance-free. It can be combined with existing PTM 210 switch designs (55 mm standard insert). PTM 202 is designed to enable wireless switches with focus on
PTM 210 – Wireless Switch Module
Friday, 24 July 2020
by
The PTM 210 is a e miniaturized batteryless switch modules (40 mm x 40 mm x 11.2 mm) which allow the realization of very slim on-wall mountable rocker switches or remote controls. Optionally, one or two switch rockers or up to four push buttons can be realized.
PTM 215 – Wireless Switch Module with NFC
Tuesday, 21 July 2020
by
PTM 215 is a miniaturized batteryless switch module (40 mm x 40 mm x 11.2 mm) which allows the realization of a very slim, on-wall mountable rocker switches or remote controls. The actuating force is typically 9 N only over a travel of 1.8 mm. Optionally, one or two switch rockers or up to four
STM 550 – Multisensor Module (868 MHz)
Thursday, 20 February 2020
by
STM 550 enables the realization of energy harvesting wireless sensors communicating based on the EnOcean radio standard. Key applications are wall-mounted or equipment-mounted sensor applications for the measurement of temperature, humidity, illumination or acceleration / orientation.
PTM 535 – Transmitter module with enhanced security features
Friday, 28 September 2018
by apelka
The radio transmitter module PTM 535 from EnOcean enables the implementation of wireless sensors and switches without batteries. Key applications are handheld remote controls or industrial switches. PTM 535 can be connected to the energy converter ECO 200 via a contact spring. PTM 535 protects the outgoing communication with enhanced security features like AES 128
- 1
- 2



Deutsch
日本語 









