WIRELESS CONTACT FM.V.EO, OPENING SENSOR FOR WINDOWS AND DOORS, BATTERY POWERED
The battery powered wireless contact FM.V.EO is used to show the opening status of windows and doors made of plastic or wood. The wireless contact is a radio contact which is not visible when the window is closed. It is installed in the rebate area between the sash and the frame, enabling detection of opening
ALADIN Turo multisensor / wireless
Temperature / brightness / humidity / acceleration Energy self-sufficient multi-sensor for recording temperature, brightness, humidity and acceleration. The energy supply is provided by an indoor solar cell. The sensor can be fitted with a button battery for use in darker rooms. The ALADIN Turo multisensor was developed in the same design as the ALADIN Turo
CO2 measuring instrument CM 20 E
Application For continuous monitoring of the carbon dioxide (CO2) concentration in the ambient air. Application in rooms in which many persons work, study or live and where carbon dioxide levels may consequently be elevated due to breathing, or in rooms where a very high air quality is required (for example, bedrooms, children’s’ rooms). High concentrations
Wireless Switch Module
The ZF 2 way radio switch module is designed for use in wireless switches and remote controls without batteries. It can be used in building technology for light and shutter control or in industrial automation. The wireless switch module enables radio communication with EnOcean receivers and operates via radio according to the EnOcean Alliance Radio
wibutler pro (2. Gen.)
Energy control and alarm gateway for future-oriented home automation. It supports different communication standards and connects various manufacturers from different branches with each other. Thus the wibutler pro (2. Gen.) is compatible with a multitude of components and realizes all common smart home applications.
PTM 202 – Toggle Switch Transmitter Module (868 MHz)
The toggle switch transmitter module PTM 202 enables the setup of intuitive and easy to use self-powered switches. PTM 202 module is powered by an electro-dynamic generator and therefore maintenance-free. It can be combined with existing PTM 210 switch designs (55 mm standard insert). PTM 202 is designed to enable wireless switches with focus on
Eltako Wireless mini handheld transmitter, waterproof, without battery or wire FMH1W-anso
Wireless mini handheld transmitter waterproof 72 x 30 mm, 15 mm high. Weighs only 34 grams. Generates the power for wireless telegrams itself when the button is pressed, therefore there is no battery.
Eltako Wireless mini handheld transmitter, waterproof, without battery or wire FMH1W-wg/rot
Wireless mini handheld transmitter waterproof 72 x 30 mm, 15 mm high. Weighs only 34 grams. Generates the power for wireless telegrams itself when the button is pressed, therefore there is no battery.
AL-512-00-868 EnoDisc® / CE, EnOcean radio receiver and transmitter
The EnoDisc® is an EnOcean transceiver for smart spaces that communicates via Ethernet and is powered via PoE (Power Over Ethernet). The three-part housing consisting of base, lower part with RJ45 or LSA connection and cover with the electronics allows easy installation. As soon as a connection has been established via port 8424, the EnoDisc®
PTM 210 – Wireless Switch Module
The PTM 210 is a e miniaturized batteryless switch modules (40 mm x 40 mm x 11.2 mm) which allow the realization of very slim on-wall mountable rocker switches or remote controls. Optionally, one or two switch rockers or up to four push buttons can be realized.