TRIO2SYS – 4-channel modular LED receiver with EnOcean metering

Modular 4-channel LED receiver with EnOcean counter

The receiver switch 4 channels modular is used to receive radio signals from transmitters switch or from EnOcean sensors.

Designed for the switching of lighting loads type LED and compact fluorescent, it can also switch resistive loads (halogen), fluorescent tubes, halogen lamps low-voltage with transformer ferromagnetic and electronic, contactors power or small motors.

The receiver switch 4 channels is equipped with the function “ repeater “ as well as the function “ indicator of consumption “.

FUNCTIONS :

• 4-channel 1.5A receiver module
• 4 control channels in 1 single module
• EnOcean technology
• Remote control of lighting/appliances
• ON/OFF function
• Supports all types of load
• Up to 32 transmitters can be assigned (switches, presence detectors, or magnetic window or door contacts)
• Zero Crossing technology
• Power consumption metering
• Repeater and status feedback functions
• DIN rail mounting
• Easy to install and use

TECHNICAL SPECIFICATIONS :

• Power supply: 230V~ / 50 Hz
• Power consumption: <0.35W (relays deactivated)
• Output load:
  • Resistive load: 4 x 1.5A max (Cos φ=1)
  • LED: 4 x 130W
  • Inductive: 4x 300W with cosφ=0.4 to 0.6
  • Halogen: 4 x 345W
  • Compact fluorescent: 4 x 130W
• Measurement accuracy (power): 2% ± 1 digit (for power <10W)
• EnOcean Equipment Profile: D2-01-00 (power consumption) / A5-3F-00 (radio test)
• Number of associable transmitters: Up to 32 transmitters and magnetic window contacts
• Dimensions: 17.5 mm x 97.4 mm x 66.4 mm (1 DIN rail slot)
• Operating temperature : -10 to +45°C
• Humidity: 0% to 75% relative humidity (non-condensing)
• Transmission frequency: 868.3MHz
• Range in buildings :
  • Masonry: 20m, through up to 3 walls
  • Reinforced concrete: 10m, through 1 wall/ceiling maximum
  • Gypsum plasterboard/wood: 30m, through up to 5 walls