z.B. USA, Canada

EOSCU – Ceiling Mounted Occupancy Sensor (902 Mhz)

Ceiling Mounted Occupancy Sensor is wireless and self-powered making them one of the most costeffective ways to control energy-use in unoccupied rooms. The sensor harvests solar energy from indoor light and uses radio frequency technology to communicate wirelessly with other EnOcean-enabled devices, setting back temperature and turning off lights and electrical loads when it detects

EasySens® Wireless Switches Mini

Energy-harvesting wireless switch for adjusting the (dimming) status of lights and blinds. The EasySens® radio technology offers flexible attachment to glass and plasterboard walls using the adhesive pad or screws.

EasySens® SR65-DI

The SR65 DI is a wireless transmitter for the binary status of relay inputs. The status of the digital input is transmitted through radio to corresponding remote controllers in the EnOcean network or can be transferred through a gateway to any BUS network. It is often used as a push signal for night-time temperature reduction

EasySens® SR65 TF

Energy-harvesting wireless cable sensor for measuring temperature in gaseous media in heating, ventilation and air-conditioning systems. The SR65 TF can be configured via airConfig software to customized measurement ranges, transmission intervals and wake-up times. When used in dark places, a backup battery can be inserted.

EasySens® SR65 AKF

Energy-harvesting wireless duct sensor for the measurement of temperature in gaseous media of heating, ventilation and air-coditioning systems. The SR65 AKF can be configured via airConfig software to customized measurement ranges, transmission intervals and wake-up times. When used in dark places, a backup battery can be inserted.

EasySens® LC-SR04

Room sensor for humidity and temperature detection in illuminated room/space applications. For device with operating elements, adjustable telegram intervals and battery backup please refer to product SR04 rH.

EasySens® SR04

Energy-harvesting radio room sensor for measuring temperature and relative humidity in living and offi ce spaces. To be mounted via adhesive pad or screws the device sends its measured values unidirectionally to corresponding receivers or gateways, which process the information directly or – depending on the application – forward it to a central control unit.

EasySens® SR06 LCD

Energy-harvesting wireless room operating unit with an integrated LCD for the measurement of temperature and relative humidity (rH version). Depending on the type, temperature set point, fan stages, room occupancy, lighting or blinds can be controlled using the operating buttons on the device. The device transmits its measured values to corresponding receivers or gateways, which

EnOcean Wireless Smart Repeater

A cost-effective way to transmit EnOcean sensor signals over greater distances or around obstructions within a building Our wireless smart repeater is a cost-effective way to increase the range of your smart devices, allowing them to transmit data over a larger distance or where obstructions occur. Depending on the configuration and the building, repeaters can

EnOcean Wireless Single Channel CT Clamp

Measure energy consumption at a circuit, zone or machine level, in real time Pressac’s wireless current sensors (CT) measure the alternating current (AC) and report the average of 5 measurements every 30 seconds. The small, energy-harvesting devices use ultra-low power wireless and battery-less technology making them easy to install and very low maintenance. They simply