Switching actuator 1-channel miniS01

The Omnio switch actuator 1-channel miniS01 is a real powerhouse and full of innovative technology of the latest generation. Thanks to its minimal dimensions, the miniS01 fits into any junction box, but it can also easily handle heavy loads with continuous currents of up to 16 A. The hybrid switching technology used actively suppresses unwanted

EnOcean Smart Gateway (PEG – E)

Get instant access to real-time data locally or in the cloud Our smart gateway receives live data from multiple sensors, converts it into easy-to-use JSON format and makes it available locally or in the cloud, via MQTT. Enabling you to easily integrate live sensor data into your existing IoT platform, software application or Google Sheets.

SensTrack wireless

SensTrack wireless is a wireless keep. This sends a signal to an EnOcean compatible receiver terminal about the locking status of the unit. SensTrack wireless is a comfort component which was designed and developed for use in smart home or building automation systems. Mechanically operating a Schüco opening unit (e.g. by turning a window handle)

Eltako Wireless tubular motor, torque 10 Nm, speed 14/min, whisper mode 5/min FRM60M10

Wireless tubular motors 230 V/115 W for steel shafts SW60, torque 10 Nm, speed 14/min, with adapter set, bearing and whisper mode. The wireless tubular motors have a total length of 466 mm. The motors are fitted with blind protection and a noiseless soft brake.

Eltako Wireless tubular motor, torque 20 Nm, speed 14/min, whisper mode 5/min FRM60M20

Wireless tubular motors 230 V/115 W for steel shafts SW60, torque 20 Nm, speed 14/min, with adapter set, bearing and whisper mode. The wireless tubular motors have a total length of 526 mm. The motors are fitted with blind protection and a noiseless soft brake.

Eltako Wireless multi sensor in E-Design55 FMS55ESB-

Wireless multi sensor for single mounting 80 x 80 x 14 mm or mounting into the E-Design55 switching system. With integrated solar cell and battery CR 1632 (not included in the scope of supply).

STM 550 – Multisensor Module (868 MHz)

STM 550 enables the realization of energy harvesting wireless sensors communicating based on the EnOcean radio standard. Key applications are wall-mounted or equipment-mounted sensor applications for the measurement of temperature, humidity, illumination or acceleration / orientation.

EOSDA – Occupancy Sensor Sub Desk

The Sub-desk mounted Occupancy Sensor is detecting when a desk is occupied or vacant based on motion in the space underneath the desk. This device is wireless, and uses a passive infrared (PIR) sensor to detect such motion. The occupancy sensor transmits RF signals to control desk power supply or sends people counting information to

EPACA – EnOcean People Activity Counter (868 MHz)

The ceiling mounted sensor is detecting people motion activity in the sensing range underneath the sensor. The device is wireless and solar-powered, so no batteries are needed under typical light conditions and easiest to mount also in retrofitting.

EOSWA – Wall Mounted Occupancy Sensor (868 MHz)

Wall-Mounted Occupancy Sensor is wireless and self-powered making them one of the most costeffective ways to control energy-use in unoccupied rooms. The sensor harvests solar energy from indoor light and uses radio frequency technology to communicate wirelessly with other EnOcean-enabled devices, setting back temperature and turning off lights and electrical loads when it detects that