Wall transmitter module EnOcean with rocker Q.X, aluminum

EnOcean wireless wall transmitter module with rocker. Battery-free, maintenance-free device without external power supply, suitable for use with compatible wireless receivers. Designed for transmitting switching, dimming, or shutter control commands to EnOcean system wireless receivers. Each channel can be assigned to multiple wireless receivers as needed. The transmission energy is generated by converting mechanical energy

Wireless Multi-Function Controller

The controller has a built-in CO2 sensor, an optional temperature and humidity sensor, and a built-in EnOcean wireless communication module for pairing with the gateway. The screen supports displaying sensor data and can be used to control devices such as heaters and fans through EnOcean signals.

Wireless Distance Sensor

The wireless distance sensor adopts laser distance measuring technology with EnOcean protocol low power communication module, which can measure the distance with high precision. It can be used to measure the remaining amount of rolls, draws, paper cups, etc. The data can be sent to the gateway, and combined with the software, it can send

Intelligent deodorising and sterilising machine

Adopting high-energy ion deodorisation technology, plasma catalytic purification technology and plant liquid deodorisation technology, the odour removal rate is more than 90% and the bactericidal rate is more than 95%, adopting six core technologies, five levels of purification, adjustable deodorisation capacity, intelligent fault protection, low power consumption, large area of action, 360°dead-angle-free purification. Built-in EnOcean

AL-443-00-868 EnoSense® LUX / CE – Precise ambient light sensor

Our new sensor works with an internal battery for use in any ambient light situation. The EnoSense® LUX transmits its current measured value every 15 minutes, and even every minute if there is a change. With its stylish design housing, it fits unobtrusively on any wall and is only 81 x 41 x 9 mm

AL-435-00-868 EnoSense® Temp/RH / CE – Precise EnOcean Sensor for temperature and humidity

Our new EnOcean temperature sensor works with an internal battery for use in any ambient light situation. In addition to temperature, it also measures relative humidity. The EnoSense® Temp/RH sends its current measured values every 15 minutes, and even every minute if there is a change. With its stylish design housing, it fits unobtrusively on

AL-437-03-868 EnoSense® DESK / CE – Optimized EnOcean Sensor for desksharing

Compared to the EnoSense® WALL & DESK, our new sensor has a motion detector (PIR) in addition to a vibration sensor. This enables it to detect movements below the edge of the desk and recognise people even if they do not touch the desk for a longer period of time due to their activity. It

AL-431-00-868 EnoSense® WALL+DESK / CE – EnOcean Sensor for desksharing

This small EnOcean sensor is powered by its integrated solar cell and supplies its measured values at configurable intervals. The sensor, which is snapped into a housing, is attached with a double-sided adhesive pad, preferably on the table top at a corner of the workstation. Depending on the colour of the desk, the sensor is

VL-700 BASE / CE – EnOcean Gateway and Edge Controller

The VL-700 BASE serves as an IoT edge controller which, with the pre-installed software, is able to receive and interpret data from up to 32 EnoDisc® and send it to a cloud, for example. Optionally, the data can also be evaluated locally and/or transferred to the building automation system. The usual interfaces such as BACnet,

AL-602-02-868 EnoPuck® CO2 WALL / CE – EnOcean CO2 sensor and LED display

EnoPuck CO2 WALL: The CO2 traffic light “EnoPuck CO2” has been supplemented with a mounting ring for the wall and the appropriate holders on the device especially for front wall mounting. In addition, the power supply is provided via a twin stranded wire, which is routed out of the back of the device, instead of