Omnio wall mounted transmitter 1-channel wet WS-NASS-103

The Omnio wall mounted transmitter 1-channel wet WS-NASS-103-RW is a battery-less and maintenance-free transmitter including a push-button fitted in a cover of the switch and socket line “robusto” of Hager. It is designed for the wet and outdoor area and can be installed with screws. The labeling can be designed individually by using exchangeable paper

Omnio Occupancy sensor EOSWA

The Omnio ceiling mounted occupancy sensor EOSWA-W-WAND SOLARPIR is a battery-less and maintenance-free PIR motion sensor with both wide angle and long-range options for maximum efficiency and flexibility in different room settings. It communicates wirelessly with other devices using the EnOcean wireless standard (EEP A5-07-01). An integrated solar cell enables indoor light energy harvesting to

Omnio Occupancy sensor EOSCA

The Omnio ceiling mounted occupancy sensor EOSCA-W-DECKE SOLARPIR is a battery-less and maintenance-free PIR motion sensor with 360 degree viewing angle lens for maximum efficiency in different room settings. It communicates wirelessly with other devices using the EnOcean wireless standard (EEP A5-07-01). Two integrated solar cells enable indoor light energy harvesting to power the device

Eltako Professional Smart Home controller MiniSafe2

The MiniSafe2 is the smallest, universally applicable Professional Smart Home controller from Eltako. The central control unit ensures that EnOcean compatible sensors and actuators can be conveniently and centrally controlled using the GFA5 app and voice commands. This allows light, shading, air conditioning, security components, and much more to be easily and flexibly combined with

Eltako Wireless actuator Wireless socket heating actuator FSHA-230V

1 NO contact nor potential free 10 A/250 V AC. Encrypted wireless, bidirectional wireless and repeater function switchable. Only 0.8 watt standby loss.

Eltako Wireless actuator PWM dimmer switch for LED FWWKW71L

PWM dimmer switch with 2 channels for LED 12-36 V DC, each up to 4 A. Input: two terminals each for + and -. Output: one terminal for +, two terminal each for channel 1 (warm white) and channel 2 (cold white). Adjustable minimum brightness and dimming speed. With snooze function and light alarm circuit. Additionally with

Gateway KNX ENO 626 secure

The KNX ENO 626 secure device serves as a bidirectional gateway between EnOcean wireless devices and the KNX bus. With this device, commands and measured values from EnOcean wireless sensors can be transmitted to the KNX bus, for example to control KNX actuators. EnOcean wireless actuators can also be controlled via KNX. The KNX ENO

Eltako Wireless window touch contact with energy generator pure white FFTE-rw

48 x 32 x 11.5 mm. Also for ­monitoring of doors, drawers and other mobile equipment. Generates the power for wireless telegrams when the button is pressed. Therefore, no connecting wire and no standby losses. A wireless telegram is sent when a window is opened or closed. For more than 100,000 switching cycles. Evaluated via FHK14, FHK61, FSB14, FSB61, FSB71,

Eltako Wireless window handle sensor, 120 x 35 x 7 mm, with battery ­(lifetime 7 years) FFG7B-

Installation behind conventional window handle. Wireless transmit telegrams for window positions open, tilted and closed. Status telegram every 15 minutes. Very simple installation under standard window handle: Unscrew handle, fit sensor, and screw handle back on. In individual cases, the square pin of the window handle is too short when using the FFG7B- and can

Thermostat-EST.1

Various EEP optional Support underfloor heating, ventilation, air conditioning control system Able to install battery Built in solar cell 55*55 German standard frame Matched with gateway, it can control underfloor heating, ventilation, air conditioning at the same time Without gateway, it can control underfloor heating, ventilation, air conditioning independently. Air conditioner types and ventilator gears