TRIO2SYS – EnOcean wall switch 1 button compatible ODACE

EnOcean single switch, SCHNEIDER ODACE design The switch transmitter is wireless and battery-free. It is completely autonomous and sends a radio signal using the energy released when the ON and OFF buttons on the transmitter switch are pressed. It requires no maintenance. It eliminates tedious back-and-forth wiring. It can be placed anywhere in the room

NODON Micro Smart Plug EnOcean (Prise FR)

NODON® EnOcean Micro Smart Plug The NodOn® Micro Smart Plug EnOcean® lets you switch on or off any device connected to it. Based on a totally innovative design, the NodOn® Micro Smart Plug EnOcean® is one of the world’s smallest smart plugs, and is fully CE certified. Combined with a home automation system, the NodOn®

NODON EnOcean PIR Motion Sensor

Compatible with the EnOcean® worldwide Smart Home & Smart Building protocol, this EnOcean® Motion Sensor will automatically detect any motion. It can be used on standalone mode or with a home automation gateway. Thanks to its multiple mounting possibilities, place it anywhere in your house (on a table, a wall or a ceiling) and customize

NODON EnOcean dual switch micromodule

Micromodule 2 EnOcean loads The NodOn® flush-mounted module can be controlled via an EnOcean®-compatible home automation system, or directly via other EnOcean® controllers such as the Soft Remote, wall switch or NodOn® card reader. Mounted behind your existing wired switch or in the ceiling, the NodOn® flush-mounted module makes it very easy to make your

ENOCEAN EnOcean Pi 868MHz RF module

Connect your Raspberry Pi to the EnOcean world! The EnOcean Pi board is an extension board that connects directly to the GPIO connector on a Raspberry Pi board, creating an EnOcean gateway. It is powered directly by the Raspberry Pi board and therefore requires no external power supply. The system is based on TCM 310

Niko dimmer switch, EnOcean®

With this wireless and battery-free dimmer switch in Niko design, you can remotely operate EnOcean® certified 868 MHz wireless receivers. No wall breaking or cable installation is needed. For best performance, follow the installation and radio planning guidelines. The pairing procedure with a wireless receiver determines the function of each button. Up to four buttons

EnOcean Bridge

The autaniNet/EnOcean Bridge acts as a gateway between devices using the EnOcean wireless standard and Autani EnergyCenter devices communicating wirelessly using Zigbee. By linking autaniNet and EnOcean devices, the user reaps the benefits of both worlds—the convenience of EnOcean’s self-powered capabilities and the increased functionality of the much larger wireless range that Autani provides. The

SW14-080-RFH8 – SW – Batteryless wireless control stations

Wireless batetryless control station – One operator 868MHz operating frequency for european market With 90mm wobble palm switch Plastic body

Wall transmitter module Enocean with rocker switch with printed symbol arrows, K.5 aluminum matt

EnOcean radio wall transmitter module with rocker switch. Battery-free, maintenance-free device without external power supply and is suitable for use in conjunction with corresponding radio receivers. For transmitting switching, dimming or blind commands to radio receivers in the EnOcean system. Each channel can be assigned to any number of radio receivers. The transmission energy is

Wall transmitter module Enocean with rocker K.5, matt aluminum

EnOcean radio wall transmitter module with rocker. Battery-free, maintenance-free device without external power supply and is suitable for use in conjunction with corresponding radio receivers. For transmitting switching, dimming or blind commands to radio receivers in the EnOcean system. Each channel can be assigned to any number of radio receivers. The transmission energy is provided