Eltako Wireless level meter Probare P10

The wireless field test tool Probare P10 is a portable field tester which shows the signal quality of the received EnOcean 868MHz telegrams. Additionally it helps to determine the best place for EnOcean transmitters, receivers or repeaters, it can also help to look if any signals are sent or not.

Eltako 1- and 2-level wireless repeater FRP61-230V

1 and 2 level wireless repeaters. Only 0.7 watt standby loss.

Eltako Wireless 50-way remote control with display and ­rechargeable battery. With wall holder and charger FFD-al/anso

Wireless 50-way remote control with display 185 x 50 mm, 17 mm high. Power is supplied by lithium-ion battery whose voltage is monitored and shown in the display. With charger, wall holder WHF-al and 2 stainless-steel countersunk screws 2.9 x 25 mm and plugs 5 x 25 mm.

Eltako Wireless window/door contact with solar cell FTK-

Wireless window/door contact with solar cell 75 x 25 x 12 mm. Adhesive foil mounting. Protection class IP54, therefore suitable for outdoor mounting.

Eltako Wireless infrared converter with USB port FIW-USB

Wireless infrared converter with USB port for the universal remote control Logitech Harmony Touch (available from specialist retailers). Only 0.05 watt standby loss. With a special Eltako FIW data record, the infrared signals are converted into wireless telegrams by a wireless infrared converter FIW-USB and transmitted to the Eltako wireless network. Either connect to a

Eltako Wireless pushbutton 55 x 55 mm without wire F4T55B-

Wireless 4-way pushbutton for single mounting 80 x 80 x 15 mm or mounting in the 55 mm switch system. Whisper quiet and with battery (lifetime 2-5 years).

Eltako Wireless repeater pure white glossy FRP65/230V-wg

2 level wireless repeaters in the housing for single mounting 84 x 84 x 30 mm. Only 0.8 watt standby loss.

Eltako Wireless motion/brightness sensor in E-Design65 FBH65S/12V DC-wg

Wireless motion/brightness sensor pure white glossy for surface mounting 84 x 84 x 39 mm or mounting into the E-Design65 switching system. Power supply with the integrated solar cell or a 12 V DC power supply unit. Only 1 mW standby loss.

Eltako Wireless motion/brightness sensor in E-Design65 FBH65/12V DC-wg

Wireless motion/brightness sensor pure white glossy for surface mounting 84 x 84 x 39 mm or mounting into the E-Design65 switching system. Power supply with a 12 V DC power supply unit. Only 1 mW standby loss.

Eltako Wireless universal actuator FUA12-230V

Wireless universal actuator with exchangeable antenna. Impulse switch ­with integrated relay function with 1 change over contact potential free 10 A/250 V AC, incandescent lamps up to 2000 W, with DX technology. Bidirectional. Encrypted wireless. Only 0.9 watt standby loss.