EnOcean Easyclickpro flush-mounting receiver, 1-channel, with mounting plate

The bidirectional Easyclick receiver can not only receive radio signals, but also transmits back its status every time it changes. Actual ON/OFF switched states can then be visualised e.g. on the handheld transmitter D 450 FU-HS 128. The Easyclick receiver serves to switch lights and other electrical consumers.
• With mounting plate for screwing down in switch sockets with 60 mm pitch between device screws • With socket board for receiving pushbutton attachment D xx.420.xx for local switching. A range of functions and parameters can be selected.

With pushbutton attachment:
• one-key operation ON/OFF (standard function changeover)
• one-key operation (ON/OFF)
• stairwell light with selectable running time and shutdown warning
• automatic OFF after selectable running time

With Easyclick transmitter:
• two-key operation ON/OFF (standard function)
• one-key operation ON/OFF (changeover)
• button operation (pulse)
• hotel card switch with definable follow-up time
• stairwell light with selectable running time and shutdown warning
• automatic OFF after selectable running time
• fan function with delayed ON and with selectable follow-up time
• save and retrieve 4 lighting scenes at the press of a key (one lighting scene per key)
• window handle and window contact, visualisation also parallel to the switching outputs
• movement detector and light sensor
• A function can be defined individually for each of the max 32 programmed transmitters
• Integrated repeater functions (1 level / 2 level) can be switched ON for each project, irrespectively of the set functions
• Separate preassigned functions and parameters when e.g. window contacts, window handles, and movement detectors are being programmed

Technical data:
Own consumption: < 0.5 W (bistable relay)
Transmit frequency: 868.3 MHz
Voltage supply: 100–240 Vac/ 50–60 Hz
Neutral conductor: required
Ambient temperature: -20 °C to +40 °C
Storage temperature: -40 °C to +85 °C
Plugin terminals: max 1 x 1.5 mm²
Housing height: 34 mm
Rating: IP 20
With mounting plate: for screwing down in switch sockets
Approvals: CE; KEMA/KEUR
Load types 230 Vac (110 Vac)
Incandescent lamps 2500 W (1250 W)
HV halogen lamps 1200 W (600 W)
Motor load 600 VA (300 VA)
EVG load 3 pcs (3 pcs)
The quantity depends on the type and manufacturer. The device’s data sheet must be observed!

  • Product No. D 451 FU-EBI UP o.A. (00364516)
  • Manufacturer Honeywell PEHAhttp://www.peha.de
  • Category Actuator / Relay Receiver, Receivers & Controllers
  • Frequency 868 MHz (ASK): Europe, China
  • RX-EEP A5-11-04, D2-01-08, A5-38-09, A5-38-08
  • Certification Certified Level 2

Downloads