PTM 210 – Wireless Switch Module

The PTM 210 is a e miniaturized batteryless switch modules (40 mm x 40 mm x 11.2 mm) which allow the realization of very slim on-wall mountable rocker switches or remote controls. Optionally, one or two switch rockers or up to four push buttons can be realized.

PTM 215 – Wireless Switch Module with NFC

PTM 215 is a miniaturized batteryless switch module (40 mm x 40 mm x 11.2 mm) which allows the realization of a very slim, on-wall mountable rocker switches or remote controls. The actuating force is typically 9 N only over a travel of 1.8 mm. Optionally, one or two switch rockers or up to four

Easyclickpro-LED flush-mounted dimmer receiver, bi-directional, 1 channel, with energy metering

ESRPU/ EDRPU – Wireless Switch (902 MHz)

Self-powered wireless controls are simple to install. The Single and Double Rocker Pads use EnOcean energy harvesting technology to communicate wirelessly with other wireless devices and provide convenient control of lighting, temperature and miscellaneous electric loads.

EHSMU – HVAC Setback Module (902 MHz)

The HVAC Setback Module provides an extraordinarily simple, highly efficient means for switching HVAC systems between normal operation and a pre-configured setback mode. The module features two (2) buttons with LED indicator lights that are used to configure or manually control the device. The setback module is easy to install and connects to the HVAC

LEDDU – LED Zone Controller 0-10V (902 MHz)

The LED controller LEDD uses wireless technology to communicate with other self-powered EnOcean-based products and provides an amazingly simple solution for dimming control of LED lighting. It is directly supplied from the auxiliary 12V supply output of a connected LED driver. The compact size enables flexible installation inside of or next to electrical boxes and

LEDRU – LED Relay Zone Controller 0-10V (902 MHz)

The LED relay zone controller uses wireless technology to communicate with other self-powered EnOceanbased products and provides an amazingly simple solution for dimming control of LED lighting. The compact size enables flexible installation inside of or next to electrical boxes and fixtures so it can be easily wired out of sight using standard wiring practices.

ELLSU – Light Level Sensor (902 MHz)

EnOcean Light Level Sensor measures and reports the level of available natural light. Used in conjunction with suitable controllers such as EnOcean LEDR and LEDD, it enables implementation of energy saving daylight harvesting control systems.

Ermine Occupancy Sensor

Near field, around 5 meters,  Occupancy sensor. Battery powered, but it will last more than 10 years.

EOSCU – Ceiling Mounted Occupancy Sensor (902 Mhz)

Ceiling Mounted Occupancy Sensor is wireless and self-powered making them one of the most costeffective ways to control energy-use in unoccupied rooms. The sensor harvests solar energy from indoor light and uses radio frequency technology to communicate wirelessly with other EnOcean-enabled devices, setting back temperature and turning off lights and electrical loads when it detects