IntesisBox USB-ENO / C

IntesisBox USB-ENO and USB-ENO-C are transparent USB EnOcean gateways. They can be used with all kind of EnOcean devices such as sensors, actuators or gateways allowing a full control and supervision of these devices from Software applications. They have been designed to work with both ESP2 and ESP3 (configurable). They can also work as repeater

IntesisBox ME-AC-ENO-1 / 1C – Mitsubishi Electric Gateway

ME-AC-ENO-1 and ME-AC-ENO-1C devices allow a complete and natural integration of Mitsubishi Electric air conditioners with EnOcean control systems both in their 868 MHz (ME-AC-ENO-1) and 315 MHz (ME-AC-ENO-1C) versions. Compatible with all models of Domestic and Mr.Slim lines of air conditioners commercialized in Europe.

IntesisBox USB-ENO-ASCII / C

IntesisBox USB-ENO-ASCII and USB-ENO-ASCII–C gateways have been specially designed to enable supervision and control of up to 10 IntesisBox Enocean AC Gateways from USB enabled controllers or PC software with an easy commissioning. The AC variables can be easily read/written with simple ASCII text messages.

IntesisBox DK-AC-ENO-1 / 1C – Daikin Domestic Gateway

DK-AC-ENO-1 and DK-AC-ENO-1C devices allow a complete and natural integration of Daikin air conditioners with EnOcean control systems both in their 868 MHz (DK-AC-ENO-1) and 315 MHz (DK-AC-ENO-1C) versions. Compatible with all models of Domestic lines commercialized in Europe (FTXR, CTXU, FTXG, FTXS, FVXS, FLXS and FDXS.

Wireless Valve Actuator (Battery Powered)

The Wireless M3 Valve Actuator couples to plunger style valve bodies to adjust the flow rates to radiators in hot water and steam heating systems. The M3 Valve Actuator is typically installed on a valve near the radiator and communicates wirelessly with a control system and temperature sensor to regulate the temperature in the room

Plug-in Controller

The wirelessly controlled ILLUMRA Plug-in Controller responds to self-powered wireless light switches and other ILLUMRA transmitters to provide ON/OFF control of lights and other plug-in devices. The controller may also respond to signals from wireless occupancy sensors to provide automatic control of electrical loads.

HORA SmartDrive MX

Wirless Heating Valve

wiSTAR Plug-in Switch Module

A simple solution for wireless control through any standard outlet. Controlling lamps and electronics in any room is simple when you use Hubbell Building Automation’s wiSTAR Plug-In Switch Module.

wiSTAR Rocker Pad (single, double) Self-powered, Wireless Switch

Self-powered wireless controls are simple to install. Hubbell Building Automation’s wiSTAR Single and Double Rocker Pads use EnOcean energy harvesting technology to communicate wirelessly with other wireless devices and provide convenient control of lighting, temperature and miscellaneous electric loads.

wiSTAR Occupancy Sensor Wall Mounted

Saving energy without sacrificing comfort can be effortless with occupancy based controls. Hubbell Building Automation’s wiSTAR Wall-Mounted Occupancy Sensors are wireless and self-powered making them one of the most cost-effective ways to control energy-use in unoccupied rooms.