Pressac EnOcean 3 Channel Current Transformer

Transmitting the measured electrical current flow wirelessly. Measure the alternating current (AC) and report the average of 5 measurements every 30 seconds. Wireless current sensors (CT) measure the alternating current (AC) and report an average of 5 measurements every 30 seconds. They can easily be fitted inside a machinery panel, distribution panel or other suitable

Pressac EnOcean 1 Channel Current Transformer

Transmitting the measured electrical current flow wirelessly. Measure the alternating current (AC) and report the average of 5 measurements every 30 seconds. Wireless current sensors (CT) measure the alternating current (AC) and report an average of 5 measurements every 30 seconds. They can easily be fitted inside a machinery panel, distribution panel or other suitable

EnOcean Wireless Temperature & Humidity Sensor

Periodically measuring temperature and humidity of its environment. Significant changes reported immediately. A wireless temperature & humidity sensor for EnOcean systems. Powered by a solar cell, it works absolutely maintenance-free. An integrated energy store allows operation for several days in total darkness. In dark surroundings, a coin cell battery can be retrofitted. It periodically measures

Current sensor (Pressac)

The Pressac sensing V3 wireless three channel CT clamp is designed to measure and report the AC current flowing in three separate channels. Powered from any of the measured conductors, the measured current in all three channels is reported every 30 seconds. The Pressac sensing V3 wireless three channel CT clamp is easily installed with

Magnet Contact Sensor – EMCSJ (OEM)

EMCSJ is an energy-harvesting wireless magnet contact sensor for EnOcean systems. Powered by a solar cell, EMCSJ works absolutely maintenance-free. An integrated energy store allows operation for several days in total darkness. In dark surroundings, a coin cell battery can be retrofitted. The small housing can easily be mounted to windows or door frames or

Motion Detector with Illumination Sensor – EMDCJ

EMDC Easyfit motion detection with illumination sensor is a self-powered device that monitors the environment for person movement using a passive infrared (PIR) sensor and measures the light level via a dedicated illumination sensor. Detected movement and the measured illumination level are communicated wirelessly using EnOcean advertising telegrams according to the EnOcean sensor specification. EMDC

Multi-sensor: STM 550J

STM 550 Multisensor Module with NFC interface STM 550J enables the realization of energy harvesting wireless sensors communicating based on the EnOcean radio standard. Key applications are wall-mounted or equipment-mounted sensor applications for the measurement of temperature, humidity, illumination or acceleration / orientation.

Niko dimmer switch, EnOcean®

With this wireless and battery-free dimmer switch in Niko design, you can remotely operate EnOcean® certified 868 MHz wireless receivers. No wall breaking or cable installation is needed. For best performance, follow the installation and radio planning guidelines. The pairing procedure with a wireless receiver determines the function of each button. Up to four buttons

ALADIN wireless pushbutton / 1-fold / 2-fold / all colors

Works without wiring and without battery by pressing the rocker and is completely maintenance-free. The wireless pushbutton sends via 868MHz an EnOcean protocol. Example Product: ALADIN wireless pushbutton / 1-fold / white / unprinted

EnOcean radio transmitter 4-channel, le jaune vif (4320W), series LS

EnOcean radio transmitter The JUNG radio transmitters with EnOcean technology have an NFC module. That simplifies the configuration, as they integrate the smart switches with this wireless interface. 4-channel including mounting plate, adhesive film and fastening screw Intended use Radio transmitter for the transmission of switching, dimming or shutter commands to radio receivers of the