AMWRFH8 – Wireless Batteryless Limit Switches

• Wireless batteryless limit switch

• RFH8 transmitter with 868 MHz operating frequency for European market

The AMWRFH8 platform supports multiple actuator configurations, allowing selection of the appropriate actuator depending on the required mechanical interface.

Each configuration is supplied under the model series AMWXXXRFH8, where XXX identifies the selected actuator type (for extended actuator codes, the same format applies using the full actuator code).

The product family includes the following actuator types:

• F11 – Plain plunger

• F12 – Metal roller plunger

• F41 – Nylon Ø18 roller lever

• F45 – Nylon Ø18 roller lever

• F46 – Nylon Ø18 roller lever

• F47 – Stainless steel ball bearing Ø18 roller lever

• F51 – Adjustable nylon Ø18 roller lever

• F52 – Adjustable rubber Ø50 roller lever

• F53 – Adjustable metal Ø18 roller lever

• F55 – Adjustable rubber Ø50 roller with adjustable lever

• F61 – Nylon actuator with stainless steel spring

• F62 – Stainless steel spring actuator

• F71 – Metal rod lever (3 mm diameter)

• F72 – Fiberglass rod lever (3 mm diameter)

• F73 – Plastic rod lever (6 mm diameter)

• F74 – Fiberglass rod lever (6 mm diameter)

• F75 – Metal square rod lever (3×3 mm)

• T14 – Plain plunger with dust protection cup

• T21 – Plain plunger with M18×1 fixing nuts

• T30 – Roller lever on plastic plunger

• T31 – Roller lever on metal plunger

• T32 – Roller lever on metal plunger

• T34 – Roller lever on plastic plunger

• T35 – Roller lever on metal plunger with dust protection cup

• T36 – Roller lever on metal plunger with dust protection cup

• T38 – Adjustable roller lever on plastic plunger

• T39 – Adjustable roller lever on plastic plunger with dust protection cup

• T91 – Multidirectional stainless steel spring actuator

• T92 – Multidirectional nylon actuator with stainless steel spring

• T93 – Multidirectional stainless steel spring actuator

Additional actuator codes supplied under the same AMWRFH8 model series:

• F5100 – Adjustable toothed (2 mm step) nylon Ø18 roller lever

• F5200 – Adjustable toothed (2 mm step) rubber Ø50 roller lever

• F5500 – Adjustable toothed (2 mm step) rubber Ø50 roller with adjustable lever

• T2101 – Plain plunger with M12×1 fixing nuts