PTM 215J – Wireless Switch Module with NFC (928 MHz)

PTM 215J is a miniaturized batteryless switch module (40 mm x 40 mm x 11.2 mm) which allows the realization of a very slim, on-wall mountable rocker switches or remote controls. Product comes with NFC interface for commissioning and encryption mode with transmission of the sequence counter « RLC » in every telegram. For details see: https://www.enocean.com/en/products/enocean_modules_928mhz/ptm-215j/

PTM 215U – Wireless Switch Module with NFC (902 MHz)

PTM 215U is a miniaturized batteryless switch module (40 mm x 40 mm x 11.2 mm) which allows the realization of a very slim, on-wall mountable rocker switches or remote controls. Product comes with NFC interface for commissioning and encryption mode with transmission of the sequence counter « RLC » in every telegram. For details see: https://www.enocean.com/en/products/enocean_modules_902mhz/ptm-215u/  

EnOcean Wireless Pulse Counter

Monitor the pulse count from a meter or pulse output Pressac’s wireless pulse counters are designed to count the number of pulses from electricity, water, or general meters, as well as machinery and equipment with a pulse output. Connects to equipment with a pulse output Monitors the pulse output from meters, machinery and equipment. Supports

AGFEO En-Modul 42 – EnOcean without range problems and with all the possibilities of modern communication channels as a supplement to KNX, HomeMatic, MQTT (IoT) and network (TCP/IP http requests).

SmartHome on a new comfort level The AGFEO En-Modul 42 offers the possibility to operate and use EnOcean radio telegrams also via the communication channels of an AGFEO telephone system. For this purpose, the module is plugged into a free module slot of a suitable AGFEO system telephone. The SmartHome server integrated in the AGFEO

Eltako Wireless window contact in the rebate open/closed with battery eTronic

Wireless window contact in the rebate open/closed with battery (lifetime 6-8 years) 77 x 24 x 10 mm, black. eTronic is a battery operated (CR 2032) wireless switching contact that is concealed in the window. A pin on the lower corner drive, which is attached to the moving bolt of the fitting, triggers the contact of the eTronic. Fixing by

Eltako Wireless window multisensor in the rebate with battery mTronic

Wireless window multisensor in the rebate with battery ­(lifetime several years) 135 x 18 x 9 mm, light grey. With intelligent burglary detection in mode 1 and 2 (locking monitoring). An alarm signal is sent when the window is opened at the locked and tilted position. Fixing by screwing in the window frame, between frame and sash on PVC or

Eltako Wireless outdoor socket switch actuator FASSA-230V

1 NO contact not potential free 16 A/250 V AC, 230 V LED lamps and ESL up to 400 W, incandescent lamps 2300 Watt. 116x56x46 mm (measure­ments without plug), black. Suitable for both indoors and outdoors, IP44 (splash-proof). Encrypted wireless, bidirectional wireless and repeater function are ­switchable. Only 0.4 watt standby loss.

Eltako Wireless CO2 desktop sensor temperature+­humidity sensor and signal FCO2TS-wg

Dimensions: 85 x 85 x 65 mm. With slip-resistant plastic feet. With controlled LED display ­according to the ambient air quality and brightness. Additionally with warning signal at level red. Standby loss only 0.4 watts on average. Power supply with enclosed plug-in power supply with 200 cm connection cable.

Eltako Wireless light actuator adapter FSLA-230V

Wireless light actuator adapter 10 A/250 V AC. 100x55x45 mm (measure­ments ­without plug), pure white glossy. Impulse switch with NO contact. 230 V incandescent lamps and halogen lamps 1000 W, ESL and 230 V LED lamps up to 200 W. Standby loss only 0.8 watt.

Wireless Wireless 1-way industrial pushbutton for surface mounting F1ITAP

Wireless 1-way industrial pushbutton for surface mounting 80 x 72 x 56 mm. Protection class IP67. With battery (lifetime 3-5 years). No standby loss.