0-10V Lighting Control Module (metering & temp)(LM)

The M9-USR-LM offers bi-directional, ON/OFF and 0-10V dimming control when combined with a wireless light switch or automatic shut-off when combined with a wireless occupancy sensor.

1 Channel Lighting Relay (USR-L3)

The M9-USR-L3 Lighting Control Module responds to a variety of wireless EnOcean devices to control and dim LED drivers, fluorescent ballasts, or other switchable loads. The Mx-USR-L3 offers bi-directional, ON/OFF and 0-10V dimming control when combined with a wireless light switch or automatic shut-off when combined with a wireless occupancy sensor. Additionally, the Lighting Control

Magnum USB Stick

M9-USB  The Magnum USB stick enabled with a radio module for over-the-air configuration or a Magnum eBox (Mx-EBOX) for configuration over Ethernet / WIFI.

Room Control Module

M9-RBW  Solar-powered room control module with LCD and controls, with smart communication management for measuring room temperature and for wireless transmission of measured values, occupancy, setpoint and weekly schedule. The Mx-RBW supports the EnOcean radio standard ISO/IEC 14543-3-10 for direct communication with the Mx-D15 radio small actuator or an EnOcean gateway. It uses EEP D2-10-01*

PWM LED Dimming Module

M9-OPUS-PWMLV  The Magnum Energy Solution’s PWM LED Dimming Control Module, through the use of thousands of PWM dimming steps, creates what is perceived by the natural eye as a single continuous dim, even at extremely low light levels.

In-Fixture Lighting Node (10V12)

The Mx-OPUS-10V12 is compatible with 0-10V, dim-to-off LED drivers. The device is powered through available low voltage from the driver or an available 12-15VDC source.

Wireless Occupancy Sensor (wall-mounted)

M9-EOSW  The wall-mounted occupancy sensor saves energy and adds convenience by accurately detecting when an area is occupied or vacant.

Wireless Occupancy Sensor (ceiling mounted)

M9-EOSC (ceiling mounted)  The ceiling-mounted occupancy sensor saves energy and adds convenience by accurately detecting when an area is occupied or vacant.

Window / Door Sensor

M9-EDWS  The Magnum Door / Window Sensor helps provide energy savings for an area by detecting when a door or window opens or closes. It is a wireless solar-powered sensor that can be used on its own to detect the open and closed status of entry doors or windows, or it can be paired with

1 or 2 Channel Switch

M9-EDRP / M9-ESRP  Magnum Single and Double Rocker Pads use radio frequency technology to communicate wirelessly with other Magnum devices and provide convenient control of lighting, temperature and miscellaneous electric loads. The rocker pads are self-powered and never require batteries because the simple act of pressing the rocker generates enough energy to send a signal to