Molex CoreSync Wireless Occupancy Sensor, Ceiling Mounted (902 MHz)

CoreSync Ceiling Mounted Occupancy Sensors are wireless and self-powered, providing a cost-effective way to control energy use in unoccupied rooms. The CoreSync Ceiling Mounted Occupancy Sensor harvests solar energy from indoor light and uses radio frequency technology to communicate wirelessly with other CoreSync devices, helping building automation systems to reset temperature, turn off lights and control other electrical loads

Molex CoreSync Wireless LED Relay Zone Controller (902 MHz)

The LED Relay Zone Controller uses wireless technology to communicate with other wireless, self-powered components. The compact size enables flexible installation inside of or next to electrical boxes and fixtures so the LED Relay Zone Controller can be easily wired out of sight using standard wiring practices. Simply link the module to a CoreSync motion sensor, light sensor, switch

Molex CoreSync Wireless LED Relay Zone Controller (868 MHz)

The LED Relay Zone Controller uses wireless technology to communicate with other wireless, self-powered components. The compact size enables flexible installation inside of or next to electrical boxes and fixtures so the LED Relay Zone Controller can be easily wired out of sight using standard wiring practices. Simply link the module to a CoreSync motion sensor, light sensor, switch

Molex CoreSync Wireless PoE Gateway (868 MHz)

The CoreSync Wireless PoE Gateway enables remote network control of lights, sensors, local dimmers and zone controllers. The CoreSync PoE Gateway enables the integration of EnOcean based devices to be integrated for monitoring and control in the CoreSync system. The Gateway is powered and IP connected via CAT5e or CAT6 UTP cable to the Network Equipment and the CoreSync

Molex CoreSync Wireless PoE Gateway (902 MHz)

The CoreSync Wireless PoE Gateway enables remote network control of lights, sensors, local dimmers and zone controllers. The CoreSync PoE Gateway enables the integration of EnOcean based devices to be integrated for monitoring and control in the CoreSync system. The Gateway is powered and IP connected via CAT5e or CAT6 UTP cable to the Network Equipment and the CoreSync

Wireless 6-in-1 Air Quality Sensor

LD-AQS/A is a wireless 6-in-1 air quality sensor based on EnOcean protocol, which can detect indoor PM1, PM2.5, PM10, formaldehyde, temperature, humidity, VOC, CO2 content in real time, and can be used with EnOcean IoT gateway. The sensor does not require wiring and needs to be powered by external power supply.

Wireless Noise Sensor

LD-NS/A is designed to measure the noise in the environment. The sensor supports the international EnOcean standard (ISO/IEC14543-3-10) and can be seamlessly interworked with other intelligent building systems (KNX BACnet, etc.). It is usually used with a gateway to check the noise level of the environment. When the noise is too high, the system generates

Wireless PM Sensor

LD-PM/F is designed to measure and report levels of PM1, PM2.5, PM10. This device is wireless, powered by the DC 5-24V line power. The sensor can also be used for smoke detection, with the alarm to achieve smoking alarm. The sensor is small and can be held in place with glue or screws, it will

Wireless Repeater

Wireless Door Lock Sensor