EnOcean Easyclick wall transmitter, BADORA, 2-channel, pure white, printed I/O

EnOcean Easyclick wall mounted transmitter, 2-channel w/o combination frame, rocker with neutral centre and printed I/O, H = 15 mm

Mobile App Gateway

The ILLUMRA Mobile Commissioning System includes an ILLUMRA Mobile Commissioning Gateway and the Scan & Link app, and is designed to support the installation of wireless controls from the planning phase to the completion of a project, and supports adjustments to behavior and zoning even after a project is complete. Download the app on your iOS or Android smartphone.

BACnet Gateway

The ILLUMRA BACnet Gateway is your network’s intelligent wired and wireless controller; a wireless transceiver for 902MHz EnOcean and Zigbee devices. It is programmable for more precise and autonomous local control. It is also a complete and automated BACnet gateway. The gateway has an aesthetic look similar to a router, allowing for in-room deployment. Points visible through BACnet® Wireless control

8 Channel Low Voltage Controller

The 8 Channel Low Voltage Controller connects wireless light switches and sensors to new or existing control systems. This low voltage on/off controller responds to up to 80 different transmitters and provides 8 output channels (dry contact or 8-30V for relay and contractor applications). The outputs can be programmed as either momentary or maintained contacts.

Window/Door Sensor

The ILLUMRA Wireless Window/Door Sensor maximizes the energy savings of heating and air conditioning systems by wirelessly providing the open-or-closed status of windows and doors. The sensor uses a magnet contact switch that is powered by a solar cell and communicates with a wide variety of ILLUMRA products. Energy waste can be reduced by 20

High Bay Occupancy Sensor

The ceiling-mounted High Bay Occupancy Sensor allows fine-tuned control of lights, temperature, and other loads by signaling when a space has been unoccupied for a set period of time. Because the sensor is wireless, there is no need to run additional wiring. Installation can be completed in a manner of minutes. The sensor is self-powered by

Wall Mount Occupancy Sensor

The ILLUMRA Wall-Mounted Occupancy Sensor covers room or walk ways with excellent motion detection performance.

Ceiling Mount Occupancy Sensor

Ceiling-Mount Motion Sensors sense motion over a 360 degree coverage area.

Daylighting Sensor

ILLUMRA Wireless Battery-Free Light Sensors save time, energy, and money by avoiding costly and time-consuming installation of hardwired daylighting controls. The light sensor saves energy by lowering the output of artificial light when daylight is present in a room, saving up to 60 percent of the energy. The wireless sensor works in conjunction with wireless

Eltako Wireless alarm controller 55 x 55 mm with ­display FAC55D/230V-

Wireless alarm controller for single mounting 80 x 80 x 14 mm or mounting into the E-Design55 switching system. Installation depth 33 mm. ­Illuminated display. Internal acoustic signal generator for a minimum volume of 80 dB. Supply voltage 230 V. Only 0.5 watt standby loss. Smart Home actuator.