SW1-RFH9 – Wireless batteryless control station

+Wireless batteryless control station – One operator +902MHz operating frequency for USA market The control station is available with different housing materials, defined by the model code. Each product is supplied under the model format SW1Y-XXX-RFH9, where Y specifies the housing type: Y = 1: Chrome-plated Zamak housing Y = 4: Plastic housing The SW1-RFH9

O3 Edge

The O3-EDGE-Coordinator is a part of every Echoflex Lighting Control system. It receives instructions (events) from Echoflex control stations and schedulers, the Echoflex scheduler, and even BACnet, then delivers them to the designated Echoflex relay or dimmer, so your fixtures always have the right look. The O3-EDGE-Sensor gathers input from Echoflex sensors and interfaces and shares that

Echo-Echoflex Interface

The Unison Echo-Echoflex Interface allows for wireless communication between Unison Echo® and Echoflex control systems. When it’s not practical to run wires between every device in your building’s control system, the Echo-Echoflex Interface is the solution. Using the built-in 902 MHz radio the Echo-Echoflex Interface can transmit wireless signals to any Echoflex control device within

Split Duplex Controller

The ERNR Split Duplex Receptacle Outlet Controller provides a simple solution to meet energy codes without requiring complex changes to a facility. The controller offers a split duplex receptacle with a 15-amp relay-switched outlet and a 15-amp constant-power outlet. Its auxiliary output allows for additional standard outlets to be controlled by its internal relay. ASHRAE

USB Cubicle Sensor

Echoflex’s ERUSB-CC is a wireless Passive Infra-Red (PIR) occupancy sensor and switch in a small package perfect for cubicle switch station.

Water Leak Sensor

Water Leak Sensor (A9-WLDS) can be installed anywhere water could leak, i.e. hot water heater or basement. It will trigger when detecting leaking water. With this sensor you can avoid loss before it floods. When the device is secure included into EnOcean network, above communication will be encrypted. Feature: Water leak sensors are used to

SW2-RFH9 – Wireless batteryless control station

+Wireless batteryless control station – Two operators + 902MHz operating frequency for USA market The control station is available with different housing materials, defined by the model code. Each product is supplied under the model format SW2Y-XXX-RFH9, where Y specifies the housing type: Y = 1: Chrome-plated Zamak body Y = 4: Plastic body The SW2-RFH9 platform

AMWRFH9 – Wireless Batteryless Limit Switches

Wireless batteryless limit switch RFH9 transmitter with 902 MHz operating frequency for USA market The AMWRFH9 platform supports multiple actuator configurations, allowing selection of the appropriate actuator depending on the required mechanical interface. Each configuration is supplied under the model series AMWXXXRFH9, where XXX identifies the selected actuator type (for extended actuator codes, the same format applies using the

ECW – Wireless batteryless pushbuttons – 902 MHz

Wireless batteryless pushbuttons with 902 MHz operating frequency for U.S American market applications. The ECW platform consists of a range of 22 mm metal or plastic pushbutton devices available in multiple operator/head styles and panel-free fixing options, suitable for industrial control, machine commands, and operator interfaces. Product family includes the following actuator categories:• Standard pushbuttons

PSW- Wireless batteryless foot switch – 902 MHz

Wireless batteryless foot switch with 902 MHz operating frequency for U.S American market applications. The platform includes robust foot switch devices with durable housing construction and protection appropriate for industrial environments. Actuation energy is mechanically converted into wireless transmission to compatible receivers for control execution. Product family includes the following configurations:• Single-pedal foot switch• Guarded