Omnio flush-mounted switching actuator 1-channel UPS230/08

The Omnio flush-mounted switching actuator 1-channel UPS230/08 is a device for switching electrical loads. Its potential free output is able to be actuated from up to 50 Omnio radio transmitters. Each transmitter can be programmed with one out of twenty different functions such as switch, push-button, staircase lighting, step-switch (AW20), time controlled switch (AW23/24/25), window

Omnio Room Sensor RTF161

The Omnio room sensor RTF- 161 is a battery less, maintenance-free and wireless sensor to measure temperature (0…40 °C) and humidity (0…100 %rH) indoors. The temperature can be set with its operation elements (set point). It is able to transmit temperature, humidity and set point via radio to Omnio thermostat actuators and gateways. The RTF-

Omnio Room Sensor RTF160

The Omnio room sensor RTF- 160 is a battery less, maintenance-free and wireless sensor to measure temperature (0…40 °C) and humidity (0…100 %rH) indoors. The measured value is transmitted wireless to Omnio thermostat actuators and gateways. The RTF160 is characterised by its excellent long-term stability and thanks to the built in solar cell it is

Omnio flush-mounted multi switching actuator 2-channels UPS230/12

The Omnio flush-mounted multi switching actuator 2-channels UPS230/12 is a device for switching electrical loads. Its two potential free outputs are able to be actuated from up to 50 Omnio radio transmitters. Each transmitter can be programmed with one out of twenty different functions such as switch, push-button, staircase lighting, step-switch (AW20), time controlled switch

Oil-Water Warning Device ÖWWG 3

Applications For visual and audible alarms if liquids with a flash point of > 55 °C are detected in, for example, oil storage rooms, drip pans, inspection ducts, ducts, protective pipes, manholes, pipes and cellars. Suitable for the following media: water, fuel oil, diesel fuel or low-viscosity lubricating oils, motor oils, hydraulic oils, vegetable oils

Oil-Water Warning Indicator ÖWU

Application For visual and audible alarms if liquids with a flash point of > 55 °C are detected. Suitable for the following media: water, fuel oil, diesel fuel or low-viscosity lubricating oils, motor oils, gearbox oils or hydraulic oils, vegetable oils and transformer oils. Description Alarm unit in wall mounting housing for early detection of

Vacuum leak detector Eurovac

Application Class I vacuum type leak detector according to EN 13160 for safe monitoring of double-walled tanks and single-walled tanks with inner lining for the storage of water-polluting liquids with a flash point > 55 °C as well as AdBlue® (urea solution 32.5 %) according to DIN 70070. The broad voltage range (AC 100–240 V)

CO2 Sensor F

Application For continuous monitoring of the carbon dioxide (CO2) concentration in the ambient air. Application in rooms in which many persons work, study or live and where carbon dioxide levels may consequently be elevated. High concentrations of carbon dioxide in the ambient air reduce the ability of persons to concentrate and perform. Ideal for educational

Temperature and Humidity Sensor FTM TF

The temperature and humidity sensor FTM TF cyclically measures the ambient temperature as well as the air humidity and sends a wireless EnOcean message. Mounting by means of simply placing, gluing, screwing or fixing with cable ties. An integrated photovoltaic cell supplies the required power. An optional battery can be used for application in darker

Temperature Sensor FTM T

Application Determination of the ambient temperature and air humidity at a defined location. Description The temperature sensor FTM T transmits the current ambient temperature via the integrated EnOcean® wireless module to the AFRISOhome gateway. The temperature and humidity sensor FTM TF also transmits the value of the current air humidity. Based on the event message,