EMDCA – Motion Detector with Illumination Sensor (868 MHz)

EMDC(A) Easyfit motion detection with illumination sensor is a self-powered device that monitors the environment for person movement using a passive infrared (PIR) sensor and measures the light level via a dedicated illumination sensor. Detected movement and the measured illumination level are communicated wirelessly using EnOcean advertising telegrams according to the EnOcean sensor specification. EMDC

PTM 215J – Wireless Switch Module with NFC (928 MHz)

PTM 215J is a miniaturized batteryless switch module (40 mm x 40 mm x 11.2 mm) which allows the realization of a very slim, on-wall mountable rocker switches or remote controls. Product comes with NFC interface for commissioning and encryption mode with transmission of the sequence counter « RLC » in every telegram. For details see: https://www.enocean.com/en/products/enocean_modules_928mhz/ptm-215j/

PTM 215U – Wireless Switch Module with NFC (902 MHz)

PTM 215U is a miniaturized batteryless switch module (40 mm x 40 mm x 11.2 mm) which allows the realization of a very slim, on-wall mountable rocker switches or remote controls. Product comes with NFC interface for commissioning and encryption mode with transmission of the sequence counter « RLC » in every telegram. For details see: https://www.enocean.com/en/products/enocean_modules_902mhz/ptm-215u/  

EnOcean Wireless Pulse Counter

Monitor the pulse count from a meter or pulse output Pressac’s wireless pulse counters are designed to count the number of pulses from electricity, water, or general meters, as well as machinery and equipment with a pulse output. Connects to equipment with a pulse output Monitors the pulse output from meters, machinery and equipment. Supports

KNX RF/ENO Push Button 440 secure

The KNX RF/ENO Push Button 440 secure unites two wireless protocols in one device: EnOcean and KNX RF. Out of the box the push button operates in EnOcean mode.

PTM 215 – Wireless Switch Module with NFC

PTM 215 is a miniaturized batteryless switch module (40 mm x 40 mm x 11.2 mm) which allows the realization of a very slim, on-wall mountable rocker switches or remote controls. The actuating force is typically 9 N only over a travel of 1.8 mm. Optionally, one or two switch rockers or up to four

EOSCA – Ceiling Mounted Occupancy Sensor (868 MHz)

Ceiling Mounted Occupancy Sensor is wireless and self-powered making them one of the most costeffective ways to control energy-use in unoccupied rooms. The sensor harvests solar energy from indoor light and uses radio frequency technology to communicate wirelessly with other EnOcean-enabled devices, setting back temperature and turning off lights and electrical loads when it detects

EnOcean Wireless Door and Window Sensor

Know whether doors and windows are open or closed, in real time Pressac’s wireless current sensors (CT) measure the alternating current (AC) and report the average of 5 measurements every 30 seconds. The small, energy-harvesting devices use ultra-low power wireless and battery-less technology making them easy to install and very low maintenance. They simply clip

EnOcean Wireless Dry Contact Sensor

Get real-time alerts about the contact status of essential equipment, such as UPS status, security systems, fire alarms or air conditioning units Our wireless dry contact sensors monitor the status of any equipment that has a volt-free, dry contact output, such as UPS status, security systems, fire alarms or air conditioning units. The small, energy

EnOcean Wireless Temperature and Humidity Sensor

Measure and monitor the ambient thermal conditions in each room or zone, in real time Our wireless multi-sensors measure the ambient temperature and relative humidity in each room, cabinet or zone. The small, solar-powered sensors use ultra-low power wireless technology, making them easy to install and very low maintenance. Optional battery back-up version available for