TRIO2SYS – 1-button roller shutter switch

This switch transmitter is wireless, battery-free and therefore maintenance-free. Completely autonomous, it sends a radio signal thanks to the energy released when one of its buttons is pressed.

Switch transmitters can be placed anywhere in the room and changed at will. They can be mounted on a wall using either screws or adhesive tape.

This makes it particularly suitable for electrical installations without flush-mounting, such as renovations, modifications to domestic installations or offices with movable walls.

Simply press a button on the switch to remotely control various equipment via receivers. Before use, the switch must be associated with a receiver (see receiver documentation for programming).

Combined with a receiver and a light sensor, it can be used to remotely control a range of electrical equipment, including roller shutters.

This switch is delivered complete with a white technopolymer cover plate from the Vimar PLANA range. Several colors and models of cover plate are also available.

FUNCTIONS :

• Cordless, battery-free switch
• EnOcean technology
• Control one or more EnOcean receivers
• Add a control point
• Can be installed anywhere
• On/off and dimmer function
• Ideal for renovation
• Î’ V marking for roller shutters
• Easy to install and use

TECHNICAL SPECIFICATIONS :

• Transmitter frequency: 868.3MHz
• Transmitter power: 10mW max
• Dimensions: base 80x80mm x height 15mm
• Temperature range: -25 to +65°C
• Switching cycles: > 50,000
• Certifications: CE and R&TEE directive 1999/5/CE
• Relative humidity: 0% to 95
• Range in buildings:
  • Masonry: 20m, through up to 3 walls
  • Reinforced concrete: 10m, through 1 wall/ceiling maximum
  • Gypsum plasterboard/wood: 30m, through 5 walls maximum