TRIO2SYS – Modular 1-channel LED receiver with EnOcean metering

Modular 1-channel LED receiver with EnOcean counter

The switch receiver 1 channel modular is used to receive radio signals from switch transmitters or from EnOcean sensors.

Designed for the switching of lighting loads type LED and compact fluorescent, it can also switch resistive loads (halogen), fluorescent tubes, halogen lamps low-voltage with transformer ferromagnetic and electronics, contactors power or small motors.

The receiver switch 1 channel is equipped with the function «  repeater «  as well as as the function «  consumption indicator « .

FUNCTIONS :

• 1-channel 1.5A receiver module
• EnOcean technology
• Remote control of lighting/appliances
• ON/OFF function
• Supports any type of load
• Up to 32 transmitters can be assigned (switches, presence detectors, or magnetic window or door contacts)
• Zero Crossing technology
• Power consumption metering
• Repeater and status feedback functions
• DIN rail mounting
• Easy to install and use

TECHNICAL SPECIFICATIONS :

• Power supply: 230V~ / 50 Hz
• Power consumption: <0.35W (relay deactivated)
• Output load:
  • Resistive load: 1.5A/345VA max (Cos φ=1)
  • LED: 345W
  • Inductive: 800W with cosφ=0.4 to 0.6
  • Halogen: 920W
  • Compact fluorescent: 345W
• Measurement accuracy (power): 2% ± 1 digit (for power <10W)
• EnOcean Equipment Profile: D2-01-00 (power consumption) / A5-3F-00 (radio test)
• Number of associable transmitters: Up to 32 transmitters and magnetic window contacts
• Dimensions: 17.5 mm x 97.4 mm x 66.4 mm (1 DIN rail slot)
• Operating temperature : -10 to +45°C
• Humidity: 0% to 75% relative humidity (non-condensing)
• Transmission frequency: 868.3MHz
• Range in buildings :
  • Masonry: 20m, through up to 3 walls
  • Reinforced concrete: 10m, through 1 wall/ceiling maximum
  • Plasterboard / Wood: 30m, through 5 walls maximum