id post_content post_title permalink post_thumbnail product_no manufacturer enocean_product_category enocean_frequency eep eep_tx enocean_certification
549138 "
Measure the indoor air quality in each room or zone with a single sensor
\n\n\nOur indoor air quality (IAQ) sensor measures carbon dioxide (CO
2), volatile organic compounds (VOCs) and particulate matter (PM) levels, as well as temperature and humidity in a room. These small, discreet sensors can be mounted on a wall or table. Producing near real-time, highly accurate data which you can use to ensure your indoor air quality is at optimum levels at all times.\n
\n\n
Monitor all aspects of air quality\nOur sensors measure ambient carbon dioxide (CO2), total volatile organic compounds (TVOCs), particulate matter (PM1/2.5/4/10), temperature and relative humidity, all in a single sensor\n\n
Get regular air quality updates\nDesigned for fitting at head height to ensure accurate indoor air quality readings, our sensor sends reliable readings every 5-60 minutes.\n\n
Access real-time data locally or in the cloud\nAir quality data can be sent securely to a local network or the cloud ? via Ethernet, LTE (4G) or WiFi ? using Pressac?s smart gateway.\n
Features
\n
\n
\n \t- Small, discreet sensors simply mount to the wall
\n \t- Measures ambient carbon dioxide (CO2), total volatile organic compounds (TVOC), particulates (PM1/PM2.5/PM4/PM10),temperature and relative humidity:\n
\n \t- CO2 0-5000 ppm
\n \t- PM1/2.5/4/10 1-511 ?g/m3
\n \t- VOC Index 1-500
\n \t- Temperature -10-50oC
\n \t- Humidity 0-100% RH
\n
\n \n \t- Reports room conditions every 5-60 minutes (configurable)
\n \t- Mains-powered: 5V USB to DC mains adapter
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n
\n \n \t- EnOcean Equipment Profile (EEP): D2-14-58
\n \t- No recurring fees. Access the data through your chosen platform, without any additional costs from Pressac
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures
\n \t- Dimensions: 110 x 110 x 39 mm (approx)
\n
\n
\n
\n
\n\n
Download product datasheet\n
Wireless smart sensor and connected technology
\n
\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\n
Learn more about Pressac's sensor technology\n
Easily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n
\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\n
Learn more about accessing and integrating sensor data\n\n
\n
\n
\n
" EnOcean Wireless Indoor Air Quality (IAQ) Sensors https://www.enocean-alliance.org/enocean-wireless-indoor-air-quality-iaq-sensors-2/ https://www.enocean-alliance.org/wp-content/uploads/2021/11/770x450_airqualityproduct_web-1.jpg SR_LIN_IAQ_E902 Pressac CO2 / Air Quality Sensor, Humidity Sensor, Temperature Sensor, Wireless Sensors 902 MHz: USA, Canada D2-14-5C Certified Level 2
549119 "Measure the indoor air quality in each room or zone with a single sensor
\n\n\nOur indoor air quality (IAQ) sensor measures carbon dioxide (CO
2), volatile organic compounds (VOCs) and particulate matter (PM) levels, as well as temperature and humidity in a room. These small, discreet sensors can be mounted on a wall or table. Producing near real-time, highly accurate data which you can use to ensure your indoor air quality is at optimum levels at all times.\n
\n\n
Monitor all aspects of air quality\nOur sensors measure ambient carbon dioxide (CO2), total volatile organic compounds (TVOCs), particulate matter (PM1/2.5/4/10), temperature and relative humidity, all in a single sensor\n\n
Get regular air quality updates\nDesigned for fitting at head height to ensure accurate indoor air quality readings, our sensor sends reliable readings every 5-60 minutes.\n\n
Access real-time data locally or in the cloud\nAir quality data can be sent securely to a local network or the cloud ? via Ethernet, LTE (4G) or WiFi ? using Pressac?s smart gateway.\n
Features
\n
\n
\n \t- Small, discreet sensors simply mount to the wall
\n \t- Measures ambient carbon dioxide (CO2), total volatile organic compounds (TVOC), particulates (PM1/PM2.5/PM4/PM10),temperature and relative humidity:\n
\n \t- CO2 0-5000 ppm
\n \t- PM1/2.5/4/10 1-511 ?g/m3
\n \t- VOC Index 1-500
\n \t- Temperature -10-50oC
\n \t- Humidity 0-100% RH
\n
\n \n \t- Reports room conditions every 5-60 minutes (configurable)
\n \t- Mains-powered: 5V USB to DC mains adapter
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n
\n \n \t- EnOcean Equipment Profile (EEP): D2-14-58
\n \t- No recurring fees. Access the data through your chosen platform, without any additional costs from Pressac
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures
\n \t- Dimensions: 110 x 110 x 39 mm (approx)
\n
\n
\n
\n
\n\n
Download product datasheet\n
Wireless smart sensor and connected technology
\n
\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\n
Learn more about Pressac's sensor technology\n
Easily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n
\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\n
Learn more about accessing and integrating sensor data\n\n
\n
\n
\n
" EnOcean Wireless Indoor Air Quality (IAQ) Sensors https://www.enocean-alliance.org/enocean-wireless-indoor-air-quality-iaq-sensors/ https://www.enocean-alliance.org/wp-content/uploads/2021/11/770x450_airqualityproduct_web.jpg SR_LIN_IAQ_E868 Pressac CO2 / Air Quality Sensor, Humidity Sensor, Temperature Sensor, Wireless Sensors 868MHz (ASK): EU (and potentially others e.g. Non-EU Europe, China, Singapure?) D2-14-5C Certified Level 3
549111 "Measure your room occupancy and conditions with a single sensor
\nOur room condition sensor measures occupancy, light, sound, temperature and humidity. This small, discreet sensor can be mounted on a wall, ceiling or tabletop. Producing near real-time, highly accurate data which you can use to ensure your room conditions are at optimum levels at all times.\n\n
\n
\n\n
Monitor the conditions in a room\nMeasure occupancy, sound, light, temperature and humidity, all in a single sensor\n
Get regular occupancy and conditions updates\nOur sensor reports occupancy instantly and reports room conditions every 5-60 minutes.
\n
\n
\n
\n\n
\n
\n
\n
Access real-time data locally or in the cloud\nAir quality data can be sent securely to a local network or the cloud ? via Ethernet, LTE (4G) or WiFi ? using Pressac?s smart gateway.
\n
\n
\n
\n
Features
\n
\n
\n \t- Small, discreet sensors simply mount to the wall, ceiling or table top
\n \t- Measures occupancy, light, sound, temperature and humidity:\n? Occupancy up to 6 meters\n? Light 0-20,000 lx\n? Sound 0-124 dB\n? Temperature -10-50oC\n? Humidity 0-100% RH
\n \t- Instant updates when occupancy detected, plus status updates every 10?300 minutes. Reports room conditions every 5-60 minutes (configurable)
\n \t- Mains-powered: 5V USB to DC mains adapter
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n
\n \n \t- EnOcean Equipment Profile (EEP): D2-14-58
\n \t- No recurring fees. Access the data through your chosen platform, without any additional costs from Pressac
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures
\n \t- Dimensions: 110 x 110 x 43 mm (approx)
\n
\n
Download product datasheet\n
Wireless smart sensor and connected technology
\n
\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\n
Learn more about Pressac's sensor technology\n
Easily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n
\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\n
Learn more about accessing and integrating sensor data\n\n
\n
\n
" EnOcean Wireless Room Conditions Sensor https://www.enocean-alliance.org/enocean-wireless-room-conditions-sensor-2/ https://www.enocean-alliance.org/wp-content/uploads/2021/11/770x450_roomcondistionsproduct_web-1.jpg SR_LIN_RCS_E902 Pressac Humidity Sensor, Light Sensor, Noise sensor, Occupancy Sensor, Temperature Sensor, Wireless Sensors 902 MHz: USA, Canada D2-14-5D Certified Level 2
549092 "Measure your room occupancy and conditions with a single sensor
\nOur room condition sensor measures occupancy, light, sound, temperature and humidity. This small, discreet sensor can be mounted on a wall, ceiling or tabletop. Producing near real-time, highly accurate data which you can use to ensure your room conditions are at optimum levels at all times.\n\n
\n
\n\n
Monitor the conditions in a room\nMeasure occupancy, sound, light, temperature and humidity, all in a single sensor\n
Get regular occupancy and conditions updates\nOur sensor reports occupancy instantly and reports room conditions every 5-60 minutes.
\n
\n
\n
\n\n
\n
\n
\n
Access real-time data locally or in the cloud\nAir quality data can be sent securely to a local network or the cloud ? via Ethernet, LTE (4G) or WiFi ? using Pressac?s smart gateway.
\n
\n
\n
\n
Features
\n
\n
\n \t- Small, discreet sensors simply mount to the wall, ceiling or tabletop
\n \t- Measures occupancy, light, sound, temperature and humidity:\n? Occupancy up to 6 meters\n? Light 0-20,000 lx\n? Sound 0-124 dB\n? Temperature -10-50oC\n? Humidity 0-100% RH
\n \t- Instant updates when occupancy is detected, plus status updates every 10?300 minutes. Reports room conditions every 5-60 minutes (configurable)
\n \t- Mains-powered: 5V USB to DC mains adapter
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n
\n \n \t- EnOcean Equipment Profile (EEP): D2-14-58
\n \t- No recurring fees. Access the data through your chosen platform, without any additional costs from Pressac
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures
\n \t- Dimensions: 110 x 110 x 43 mm (approx)
\n
\n
Download product datasheet\n
Wireless smart sensor and connected technology
\n
\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\n
Learn more about Pressac's sensor technology\n
Easily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n
\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\n
Learn more about accessing and integrating sensor data\n\n
\n
\n
" EnOcean Wireless Room Conditions Sensor https://www.enocean-alliance.org/enocean-wireless-room-conditions-sensor/ https://www.enocean-alliance.org/wp-content/uploads/2021/11/770x450_roomcondistionsproduct_web.jpg SR_LIN_RCS_E868 Pressac Humidity Sensor, Light Sensor, Noise sensor, Occupancy Sensor, Temperature Sensor, Wireless Sensors 868MHz (ASK): EU (and potentially others e.g. Non-EU Europe, China, Singapure?) D2-14-5D Certified Level 2
534435 "Measure and monitor changes in ambient temperature in each room, cabinet or zone, in real time
\nOur wireless temperature sensors measure the ambient temperature in each room, cabinet or zone. The small, solar-powered sensors use ultra-low power wireless technology, making them easy to install and very low maintenance. Optional battery back-up available for low-light environments.\n\nMeasure live temperature\nAccess live data to get an instant view of ambient temperature in each room, cabinet or zone\n\nGet updates as temperature changes\nMonitor thermal conditions and get instant updates if temperature changes by more than 0.5șC\n\nMonitor temperature over time\nTrack temperature in each space, over time, to implement more efficient heating and cooling controls\nFeatures
\n\n
\n \t- Small, discreet sensors simply stick to the wall or cabinet
\n \t- Measures ambient temperature 0-40șC (+/- 0.5șC between 17-27°C otherwise +/- 1°C)
\n \t- Reports if the temperature changes by more than 0.5°C, otherwise updates every 15 minutes
\n \t- Solar-powered using ambient room light. Optional battery back-up for periodic low-light conditions ? batteries typically last up to 10 years
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n \t- 928 MHz for Japan (ARIB specification)
\n
\n \n \t- EnOcean Equipment Profile (EEP): A5-02-05
\n \t- No recurring fees. Access the data through your chosen platform, without any additional costs from Presssac.
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures.
\n \t- Dimensions: 76.5 x 28 x 17.5 mm (approx)
\n \t- Packaging unit: single
\n
\n
\nDownload product sheet\nWireless smart sensor and connected technology
\n\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\nLearn more about Pressac's sensor technology\nEasily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\nLearn more about accessing and integrating sensor data" EnOcean Wireless Temperature Sensor https://www.enocean-alliance.org/wireless-temperature-sensor-pressac-mini-series-2/ https://www.enocean-alliance.org/wp-content/uploads/2021/07/Temp_Mini-1.jpg MS_TEMP_BAT_928 Pressac Temperature Sensor, Wireless Sensors 928 MHz: Japan, Australia A5-02-05 Certified Level 2
534349 "Measure and monitor the ambient thermal conditions in each room or zone, in real time
\nOur wireless multi-sensors measure the ambient temperature and relative humidity in each room, cabinet or zone. The small, solar-powered sensors use ultra-low power wireless technology, making them easy to install and very low maintenance. Optional battery back-up version available for low-light environments.\n\nMeasure live ambient conditions\nAccess live data to get an instant view of ambient conditions in each room or zone\n\nGet updates as conditions change\nMonitor climate and get instant updates if temperature or humidity changes\n\nImplement precision climate controls\nFeed live data into your building management system for demand-driven HVAC control\nFeatures
\n\n
\n \t- Small, discreet sensors simply stick to the wall or cabinet
\n \t- Measures temperature and relative humidity:\n
\n \t- Temperature 0-40șC (+/- 0.5șC between 17-27°C otherwise +/- 1°C)
\n \t- Humidity 0-100% RH (+/- 5% between 30-70%)
\n
\n \n \t- Reports if the temperature changes by more than 0.5°C or humidity changes by more than 2%, otherwise updates every 15 minutes
\n \t- Solar-powered using ambient room light. Optional battery back-up for periodic low-light conditions ? battery typically last up to 10 years
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n \t- 928 MHz for Japan (ARIB specification)
\n
\n \n \t- EnOcean Equipment Profile (EEP): A5-04-01
\n \t- No recurring fees. Access the data through your chosen platform, without any additional costs from Presssac.
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures.
\n \t- Dimensions: 76.5 x 28 x 17.5 mm (approx)
\n \t- Packaging unit: single
\n
\n
\nDownload product sheet\nWireless smart sensor and connected technology
\n\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\nLearn more about Pressac's sensor technology\nEasily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\nLearn more about accessing and integrating sensor data" EnOcean Wireless Temperature and Humidity Sensor https://www.enocean-alliance.org/wireless-temperature-and-humidity-sensor-pressac-mini-series-2/ https://www.enocean-alliance.org/wp-content/uploads/2021/07/TempHumid_Mini.jpg MS_TEMP_HUM_BAT_928 Pressac Humidity Sensor, Temperature Sensor, Wireless Sensors 928 MHz: Japan, Australia A5-04-01 Certified Level 2
534110 "Get real-time alerts about the contact status of essential equipment, such as UPS status, security systems, fire alarms or air conditioning units
\nOur wireless dry contact sensors monitor the status of any equipment that has a volt-free, dry contact output, such as UPS status, security systems, fire alarms or air conditioning units. The small, energy harvesting devices use ultra-low power wireless and battery-less technology, making them easy to install and very low maintenance.\n\nReports live contact status\nA dry contact sensor can be used to monitor the open/close status of any piece of equipment that has a contact point, or reed switch\n\nGet updates as status changes\nKnow the live status and get instant updates if contact status changes\n\nTrack status over time\nMonitor equipment status in you IoT platform, BMS system or other software\nFeatures
\n\n
\n \t- Reports dry contact status changes in real-time and status\nupdates every 15 minutes
\n \t- Small, discreet sensors simply stick to a wall or side of the equipment
\n \t- Connect to the device using a push-wire connection of two wires
\n \t- Solar-powered using ambient room light. Optional battery back-up for periodic low-light conditions ? battery typically last up to 10 years
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n \t- 928 MHz for Japan (ARIB specification)
\n
\n \n \t- EnOcean Equipment Profile (EEP): D5-00-01
\n \t- No recurring fees. Access the data through your chosen platform, without any additional costs from Presssac.
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures.
\n \t- Dimensions: 76.5 x 28 x 17.5 mm (approx)
\n \t- Packaging unit: single
\n
\n
\nDownload product sheet\nWireless smart sensor and connected technology
\n\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\nLearn more about Pressac's sensor technology\nEasily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\nLearn more about accessing and integrating sensor data" EnOcean Wireless Dry Contact Sensor https://www.enocean-alliance.org/wireless-dry-contact-sensor-pressac-mini-series-2/ https://www.enocean-alliance.org/wp-content/uploads/2021/07/DryContactSensor_Mini-1.jpg MS_DRY_CON_BAT_928 Pressac Wireless Sensors 928 MHz: Japan, Australia D5-00-01 Certified Level 2
534069 "Know whether doors and windows are open or closed, in real time
\nPressac's wireless current sensors (CT) measure the alternating current (AC) and report the average of 5 measurements every 30 seconds.\n\nThe small, energy-harvesting devices use ultra-low power wireless and battery-less technology making them easy to install and very low maintenance. They simply clip around a cable and the wireless transmitter attaches outside the panel for reliable wireless data transmission. They can easily be fitted inside a machinery panel, distribution panel or other suitable location.\n\nAutomatically detect open doors\nAccess live data to know when doors or windows around your building are open or closes\n\nMonitor for changes\nMonitor each door ? including windows, cupboards, cabinets and fridges ? to automatically detect changes\n\nAutomate building management\nAutomate building management processes based on live conditions\nFeatures
\n\n
\n \t- Use magnetic fields to detect open/close status. Reports open/close changes in real time and status updates every 15 minutes
\n \t- Solar-powered using ambient room light. Optional back-up battery for low-light conditions ? battery typically lasts up to 10 years
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n \t- 928 MHz for Japan (ARIB specification)
\n
\n \n \t- Dimensions:\n
\n \t- Sensor: 76.5 x 28 x 17.5 mm (approx)
\n \t- Magnet: 62 x 12 x 13 mm (approx)
\n
\n \n \t- EnOcean Equipment Profile (EEP): D5-00-01
\n \t- No recurring fees. Access the data through your chosen platform, without any additional costs from Presssac.
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures.
\n \t- Packaging unit: single
\n
\n
\nDownload product sheet\nWireless smart sensor and connected technology
\n\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\nLearn more about Pressac's sensor technology\nEasily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\nLearn more about accessing and integrating sensor data" EnOcean Wireless Door and Window Sensor https://www.enocean-alliance.org/wireless-door-and-window-sensor-pressac-mini-series-2/ https://www.enocean-alliance.org/wp-content/uploads/2021/07/DoorWindow_Mini.jpg MS_DOOR_WIN_BAT_928 Pressac Position Sensor, Wireless Sensors 928 MHz: Japan, Australia D5-00-01 Certified Level 2
533995 "Accurately detect when a desk is occupied and monitor ongoing desk occupancy
\nPressac's wireless EnOcean desk occupancy sensors accurately detect and monitor passive infrared radiation (PIR) emitted by a person sitting at a desk. When a person enters the sensor?s field of view, the sensor detects motion and tells you someone is present within that space, without detecting people in the surrounding areas.\n\nGet instant desk occupancy updates\nThe small, discreet sensors simply stick to the underside of the desk and send an instant update when someone sits at a desk. You can configure ongoing occupancy updates every 10 minutes to 5 hours to maximise battery life.\n\nAccurate, reliable desk occupancy monitoring\nWith a narrow-angle, 180-degree radius PIR motion sensor, Pressac's desk sensors only pick up people at the desk, not people walking past or at other desks.\n\nAccess real-time data locally or in the cloud\nDesk occupancy data can be sent securely to a local network or the cloud ? via Ethernet, LTE (4G) or WiFi ? using Pressac?s smart gateway.\nFeatures
\n\n \t- Small, discreet sensors simply stick to the underside of the desk
\n \t- Narrow-angle passive infrared (PIR) sensor detects motion within 180-degree radius, enabling you to accurately detect movement under a desk, without detecting people in the surrounding areas
\n \t- Detection range within 0.5 meters based on typical desk height
\n \t- Sends instant updates when occupancy is detected
\n \t- The sensor continues to monitor the workspace and send you regular updates on whether it?s occupied or not. Status updates can be configured between 10 minutes and 5 hours
\n \t- They can be configured to allow for short ?absences? from the desk
\n \t- GDPR and privacy-compliant solution: no images or personal information stored or transmitted
\n \t- Ultra-low-power technology. Battery life typically 5+ years.
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free
\n \t- ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n
\n \n \t- EnOcean Equipment Profile (EEP): A5-07-01
\n \t- No recurring fees. Access the data through your chosen platform, without any additional costs from Presssac
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures.
\n \t- Dimensions: 93 x 65 x 28 mm (approx)
\n
\nDownload product sheet\nWireless smart sensor and connected technology
\n\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\nLearn more about Pressac's sensor technology\nEasily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\nLearn more about accessing and integrating sensor data" EnOcean Wireless Desk Occupancy Sensor https://www.enocean-alliance.org/enocean-desk-occupancy-sensor/ https://www.enocean-alliance.org/wp-content/uploads/2021/07/Desk_Occ.jpg PIR_180_BAT_WE_E902_[S]-[B] Pressac Occupancy Sensor, Wireless Sensors 902 MHz: USA, Canada A5-07-01 Certified Level 2
531765 "Monitor the pulse count from a meter or pulse output
\nPressac's wireless pulse counters are designed to count the number of pulses from electricity, water, or general meters, as well as machinery and equipment with a pulse output.\n\nConnects to equipment with a pulse output\nMonitors the pulse output from meters, machinery and equipment. Supports electricity, water or general meters.\n\nReports the pulses per kWh, mł or count\nFully configurable pulses per kWh for electricity, mł for water, or per count for general meters.\n\nAccess real-time data locally or in the cloud\nNear real-time data can be sent securely to a local network or the cloud ? via Ethernet, LTE (4G) or WiFi ? using Pressac?s smart gateway.\nFeatures
\n\n \t- Monitors the pulse output from meters, machinery and equipment and supports electricity, water or general meters in a single device.
\n \t- Smart-enables ?dumb? (non-smart) electricity meters by reading kWh and water meters by reading mł.
\n \t- Reports the number of pulses:\n
\n \t- 1-10,000 pulses per kWh
\n \t- 1-10,000 pulses per mł
\n \t- 1-10,000 pulses per count
\n
\n \n \t- Accepts dry contact, TTL or optical inputs
\n \t- Device has both battery and mains-powered option. Battery life is typically one year for most use-cases.
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n
\n \n \t- EnOcean Equipment Profile (EEP): A5-12-01, A5-12-03, A5-12-00
\n \t- No recurring fees. Access the data through your chosen platform, without any additional costs from Presssac.
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures.
\n \t- Dimensions: 108 x 131 x 58 mm (approx)
\n
\nDownload product sheet\nWireless smart sensor and connected technology
\n\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\nLearn more about Pressac's sensor technology\nEasily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\nLearn more about accessing and integrating sensor data" EnOcean Wireless Pulse Counter https://www.enocean-alliance.org/wireless-pulse-counter-pressac/ https://www.enocean-alliance.org/wp-content/uploads/2021/06/pulse-counter-1024x1024.jpg PCTR_E868_S Pressac Wireless Sensors 868MHz (ASK): EU (and potentially others e.g. Non-EU Europe, China, Singapure?) A5-12-01, A5-12-00, A5-12-03 Certified Level 3
520849 "Automatically detect occupancy in meeting rooms, offices or workspaces
\nPressac's wireless motion sensors detect and monitor the presence of people, in real time. The small, battery-powered sensors simply stick to the ceiling, enabling you to detect real-time presence and continually monitor room occupancy.\n\nGet instant room occupancy updates\nThe room sensors send an instant update when room occupancy is detected. You can configure ongoing occupancy updates every 10 minutes to 5 hours to maximise battery life.\n\nAccurate, reliable workspace monitoring\nThe wide-angle, 360-degree radius PIR motion sensors detect passive infrared radiation (PIR) emitted by a person, so no interference from glass reflections. No cameras. Fully anonymous.\n\nAccess real-time data locally or in the cloud\nLive room occupancy data can be sent securely to a local network or the cloud ? via Ethernet, LTE (4G) or WiFi ? using Pressac?s smart gateway.\nFeatures
\n\n \t- Small, discreet sensors simply stick to the ceiling
\n \t- Passive infrared (PIR) sensor detects motion within 360-degree field\nof view, up to 6 meters distance
\n \t- Field of view will depend on ceiling height Based on a typical 2.5m ceiling height, approx. 64-degree detection angle resulting in estimated 5m detection
\n \t- Instant updates when occupancy detected, plus status updates\ncan be configured between 10 minutes and 5 hours
\n \t- Absence time out can be configured between 2 and 60 minutes
\n \t- GDPR and privacy-compliant solution: no images or personal information stored or transmitted
\n \t- Ultra-low-power technology. Battery life typically 5+ years. USB-powered variant available
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n
\n \n \t- EnOcean Equipment Profile (EEP): A5-07-01
\n \t- No recurring fees. Access the data through your chosen platform, without any additional costs from Presssac
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures.
\n \t- Dimensions: 93 x 65 x 29 mm (approx)
\n
\nDownload product sheet\nWireless smart sensor and connected technology
\n\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\nLearn more about Pressac's sensor technology\nEasily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\nLearn more about accessing and integrating sensor data" EnOcean Wireless Room Occupancy Sensor https://www.enocean-alliance.org/wireless-room-occupancy-sensor-pressac-2/ https://www.enocean-alliance.org/wp-content/uploads/2021/06/Room_Occ.jpg PIR_WAL_BAT_WE_E902_[S]-[B] Pressac Occupancy Sensor, Wireless Sensors 902 MHz: USA, Canada A5-07-01 Certified Level 2
520840 "Automatically detect occupancy in meeting rooms, offices or workspaces
\nPressac's wireless motion sensors detect and monitor the presence of people, in real time. The small, battery-powered sensors simply stick to the ceiling, enabling you to detect real-time presence and continually monitor room occupancy.\n\nGet instant room occupancy updates\nThe room sensors send an instant update when room occupancy is detected. You can configure ongoing occupancy updates every 10 minutes to 5 hours to maximise battery life.\n\nAccurate, reliable workspace monitoring\nThe wide-angle, 360-degree radius PIR motion sensors detect passive infrared radiation (PIR) emitted by a person, so no interference from glass reflections. No cameras. Fully anonymous.\n\nAccess real-time data locally or in the cloud\nLive room occupancy data can be sent securely to a local network or the cloud ? via Ethernet, LTE (4G) or WiFi ? using Pressac?s smart gateway.\nFeatures
\n\n \t- Small, discreet sensors simply stick to the ceiling
\n \t- Passive infrared (PIR) sensor detects motion within 360-degree field\nof view, up to 6 meters distance
\n \t- Field of view will depend on ceiling height Based on a typical 2.5m ceiling height, approx. 64-degree detection angle resulting in estimated 5m detection
\n \t- Instant updates when occupancy detected, plus status updates\ncan be configured between 10 minutes and 5 hours
\n \t- Absence time out can be configured between 2 and 60 minutes
\n \t- GDPR and privacy-compliant solution: no images or personal information stored or transmitted
\n \t- Ultra-low-power technology. Battery life typically 5+ years. USB-powered variant available
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n
\n \n \t- EnOcean Equipment Profile (EEP): A5-07-01
\n \t- No recurring fees. Access the data through your chosen platform, without any additional costs from Presssac
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures.
\n \t- Dimensions: 93 x 65 x 29 mm (approx)
\n
\nDownload product sheet\nWireless smart sensor and connected technology
\n\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\nLearn more about Pressac's sensor technology\nEasily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\nLearn more about accessing and integrating sensor data" EnOcean Wireless Room Occupancy Sensor https://www.enocean-alliance.org/wireless-room-occupancy-sensor-pressac/ https://www.enocean-alliance.org/wp-content/uploads/2021/06/Room_Occ-1.jpg PIR_WAL_BAT_WE_E868_[S]-[B] Pressac Occupancy Sensor, Wireless Sensors 868MHz (ASK): EU (and potentially others e.g. Non-EU Europe, China, Singapure?) A5-07-01 Certified Level 2
520832 "Automatically monitor table occupancy
\nPressac's wireless 360 degree motion sensors detect and monitor the presence of people, in real time. The small, battery-powered sensors simply stick to the underside of a table, enabling you to detect real-time presence and continually monitor table occupancy.\n\nDetect real-time table occupancy\nAccess live table occupancy data for automated table booking\n\nGet updates as occupancy changes\nTrack usage to better manage cleaning and bookings\n\nTrack table use over time\nMonitor space utilisation over time to make better planning decisions\nFeatures
\n\n
\n \t- Small, discreet sensors simply stick to underside of a table
\n \t- Sensor (PIR) detects motion within 360 degree radius and sends instant updates when occupancy detected.
\n \t- Typical under-table detection range within 0.5 meters based on average table height. Actual detection range of the PIR is up to 5 meters.
\n \t- Configure absence and repeat telegram timers to suit your needs
\n \t- GDPR and privacy compliant solution: no images or personal information stored or transmitted
\n \t- Ultra-low power technology. Battery life typically 5+ years. USB-powered variant available
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n
\n \n \t- EnOcean Equipment Profile (EEP): A5-07-01\nNo recurring fees. Access the data through your chosen platform, without any additional costs from Presssac.\nManufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures.
\n \t- Dimensions: 93 x 65 x 28 mm (approx)
\n \t- Packaging unit: single
\n
\n
\nDownload product sheet\nWireless smart sensor and connected technology
\n\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\nLearn more about Pressac's sensor technology\nEasily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\nLearn more about accessing and integrating sensor data" EnOcean Wireless Table Occupancy Sensor https://www.enocean-alliance.org/wireless-table-occupancy-sensor-pressac-2/ https://www.enocean-alliance.org/wp-content/uploads/2021/06/Table_Occ.jpg PIR_360_BAT_WE_E902_[S]-[B] Pressac Occupancy Sensor, Wireless Sensors 902 MHz: USA, Canada A5-07-01 Certified Level 2
520799 "Automatically monitor table occupancy
\nPressac's wireless 360 degree motion sensors detect and monitor the presence of people, in real time. The small, battery-powered sensors simply stick to the underside of a table, enabling you to detect real-time presence and continually monitor table occupancy.\n\nDetect real-time table occupancy\nAccess live table occupancy data for automated table booking\n\nGet updates as occupancy changes\nTrack usage to better manage cleaning and bookings\n\nTrack table use over time\nMonitor space utilisation over time to make better planning decisions\nFeatures
\n\n
\n \t- Small, discreet sensors simply stick to underside of a table
\n \t- Sensor (PIR) detects motion within 360 degree radius and sends instant updates when occupancy detected.
\n \t- Typical under-table detection range within 0.5 meters based on average table height. Actual detection range of the PIR is up to 5 meters.
\n \t- Configure absence and repeat telegram timers to suit your needs
\n \t- GDPR and privacy compliant solution: no images or personal information stored or transmitted
\n \t- Ultra-low power technology. Battery life typically 5+ years. USB-powered variant available
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n
\n \n \t- EnOcean Equipment Profile (EEP): A5-07-01\nNo recurring fees. Access the data through your chosen platform, without any additional costs from Presssac.\nManufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures.
\n \t- Dimensions: 93 x 65 x 28 mm (approx)
\n \t- Packaging unit: single
\n
\n
\nDownload product sheet\nWireless smart sensor and connected technology
\n\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\nLearn more about Pressac's sensor technology\nEasily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\nLearn more about accessing and integrating sensor data" EnOcean Wireless Table Occupancy Sensor https://www.enocean-alliance.org/wireless-table-occupancy-sensor-pressac/ https://www.enocean-alliance.org/wp-content/uploads/2021/06/Table_Occ-1.jpg PIR_360_BAT_WE_E868_[S]-[B] Pressac Occupancy Sensor, Wireless Sensors 868MHz (ASK): EU (and potentially others e.g. Non-EU Europe, China, Singapure?) A5-07-01 Certified Level 2
504099 "A cost-effective way to transmit EnOcean sensor signals over greater distances or around obstructions within a building
\nOur wireless smart repeater is a cost-effective way to increase the range of your smart devices, allowing them to transmit data over a larger distance or where obstructions occur. Depending on the configuration and the building, repeaters can extend the EnOcean sensors? range from 30m up to 90m.\n\nExtend EnOcean wireless range\nRepeaters can extend the wireless range of EnOcean sensors from 30m up to 90m within line of sight (LoS)\n\nWork around obstructions\nRepeaters can be used to redirect signals around obstructions to help create a clear signal between a sensor and gateway\n\nMinimise interference\nOur selective repeaters allow you to choose which sensors to repeat, reducing unnecessary signal interference\nFeatures
\n\n
\n \t- Extend wireless range of sensors up to 90m, depending on the configuration of a building
\n \t- Select which sensors to repeat to minimise unnecessary data being transmitted and maximise available bandwidth
\n \t- Fitted with external antenna
\n \t- Powered via USB
\n \t- Function as a level-1 or a level-2
\n \t- Radio link test mode
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n
\n \n \t- No recurring fees. Access the data through your chosen platform, without any additional costs from Presssac.
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures.
\n \t- Dimensions: 93 x 65 x 28 mm (approx)
\n \t- Packaging unit: single
\n
\n
\nDownload product sheet\nWireless smart sensor and connected technology
\n\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\nLearn more about Pressac's sensor technology\nEasily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\nLearn more about accessing and integrating sensor data" EnOcean Wireless Smart Repeater https://www.enocean-alliance.org/pressac-enocean-repeater-2/ https://www.enocean-alliance.org/wp-content/uploads/2021/06/SmartRepeater.jpg REPEATER_868_UK_[S]-[B] Pressac Gateway & Building Management Systems, Gateway: TCP/ IP, Repeater, Wireless Sensors 868MHz (ASK): EU (and potentially others e.g. Non-EU Europe, China, Singapure?) All EEPs All EEPs Certified Level 2
504097 "A cost-effective way to transmit EnOcean sensor signals over greater distances or around obstructions within a building
\nOur wireless smart repeater is a cost-effective way to increase the range of your smart devices, allowing them to transmit data over a larger distance or where obstructions occur. Depending on the configuration and the building, repeaters can extend the EnOcean sensors? range from 30m up to 90m.\n\nExtend EnOcean wireless range\nRepeaters can extend the wireless range of EnOcean sensors from 30m up to 90m within line of sight (LoS)\n\nWork around obstructions\nRepeaters can be used to redirect signals around obstructions to help create a clear signal between a sensor and gateway\n\nMinimise interference\nOur selective repeaters allow you to choose which sensors to repeat, reducing unnecessary signal interference\nFeatures
\n\n
\n \t- Extend wireless range of sensors up to 90m, depending on the configuration of a building
\n \t- Select which sensors to repeat to minimise unnecessary data being transmitted and maximise available bandwidth
\n \t- Fitted with external antenna
\n \t- Powered via USB
\n \t- Function as a level-1 or a level-2
\n \t- Radio link test mode
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n
\n \n \t- No recurring fees. Access the data through your chosen platform, without any additional costs from Presssac.
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures.
\n \t- Dimensions: 93 x 65 x 28 mm (approx)
\n \t- Packaging unit: single
\n
\n
\nDownload product sheet\nWireless smart sensor and connected technology
\n\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\nLearn more about Pressac's sensor technology\nEasily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\nLearn more about accessing and integrating sensor data" EnOcean Wireless Smart Repeater https://www.enocean-alliance.org/pressac-enocean-repeater/ https://www.enocean-alliance.org/wp-content/uploads/2021/06/SmartRepeater-1.jpg REPEATER_902_US_[S]-[B] Pressac Gateway & Building Management Systems, Gateway: TCP/ IP, Repeater, Wireless Sensors 902 MHz: USA, Canada All EEPs All EEPs Certified Level 2
504079 "Measure energy consumption at a circuit, zone or machine level, in real time
\nPressac's wireless current sensors (CT) measure the alternating current (AC) and report the average of 5 measurements every 30 seconds.\n\nThe small, energy-harvesting devices use ultra-low power wireless and battery-less technology making them easy to install and very low maintenance. They simply clip around a cable and the wireless transmitter attaches outside the panel for reliable wireless data transmission. They can easily be fitted inside a machinery panel, distribution panel or other suitable location.\n\nWireless, self-powered current sensors\nThey simply clip around a cable and measure the electrical current, so there?s no interruption to the electrical supply\n\nReports current every 30 seconds\nSensors measure AC current (50Hz or 60Hz) and reports average of 5 measurements every 30 seconds\n\nAccess real-time data locally or in the cloud\nUsing our Smart Gateway, data is encrypted and sent locally or to your chosen cloud platform via MQTT\nFeatures
\n\n
\n \t- Sensors measure AC current (50Hz or 60Hz). Reports average of 5 measurements every 30 seconds
\n \t- Single-channel (single-phase) clamps measure the electrical current flowing in a single cable, while three-channel (3-phase) clamps measure current in 3 individual cables. Normally you will find single-phase systems in, for instance, households and office buildings. In the industry and for heavier machines, three-phase electric power is typically used.\n
\n \t- One channel measurement ranges:\n1A?60A (accuracy +/- 0.1A or 2%, whichever is greater)\n2A?200A (accuracy +/- 0.1A or 2.5%, whichever is greater)
\n \t- Three channels measurement ranges:\n1A?60A (accuracy +/- 0.1A or 2%, whichever is greater)\n2A?200A (accuracy +/- 0.1A or 2.5%, whichever is greater)\n2A-600A (accuracy +/- 1A or 3%, whichever is greater)
\n
\n \n \t- Self-powered using ultra-low energy from the measured conductor, so there?s no need for batteries or wiring
\n \t- Clamps simply clip around cables with no interruption to electrical supply. The wireless transmitter attaches outside the panel for reliable wireless data transmission
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n \t- 928 MHz for Japan (ARIB specification)
\n
\n \n \t- EnOcean Equipment Profile (EEP): D2-32-00, D2-32-02
\n \t- No recurring fees. Access the data through your chosen platform, without any additional costs from Presssac.
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures.
\n \t- Packaging unit: single
\n
\n
\nDownload product sheet\nWireless smart sensor and connected technology
\n\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\nLearn more about Pressac's sensor technology\nEasily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\nLearn more about accessing and integrating sensor data" EnOcean Wireless Single Channel CT Clamp https://www.enocean-alliance.org/wireless-single-channel-ct-clamp-pressac-2/ https://www.enocean-alliance.org/wp-content/uploads/2021/06/1ChanCT-Clamp_v2.jpg CTV3_928_1CH_060A, CTV3_928_1CH_200A Pressac Metering Sensor, Wireless Sensors 928 MHz: Japan, Australia D2-32-00 Certified Level 2
504077 "Measure energy consumption at a circuit, zone or machine level, in real time
\nPressac's wireless current sensors (CT) measure the alternating current (AC) and report the average of 5 measurements every 30 seconds.\n\nThe small, energy-harvesting devices use ultra-low power wireless and battery-less technology making them easy to install and very low maintenance. They simply clip around a cable and the wireless transmitter attaches outside the panel for reliable wireless data transmission. They can easily be fitted inside a machinery panel, distribution panel or other suitable location.\n\nWireless, self-powered current sensors\nThey simply clip around a cable and measure the electrical current, so there?s no interruption to the electrical supply\n\nReports current every 30 seconds\nSensors measure AC current (50Hz or 60Hz) and reports average of 5 measurements every 30 seconds\n\nAccess real-time data locally or in the cloud\nUsing our Smart Gateway, data is encrypted and sent locally or to your chosen cloud platform via MQTT\nFeatures
\n\n
\n \t- Sensors measure AC current (50Hz or 60Hz). Reports average of 5 measurements every 30 seconds
\n \t- Single-channel (single-phase) clamps measure the electrical current flowing in a single cable, while three-channel (3-phase) clamps measure current in 3 individual cables. Normally you will find single-phase systems in, for instance, households and office buildings. In the industry and for heavier machines, three-phase electric power is typically used.\n
\n \t- One channel measurement ranges:\n1A?60A (accuracy +/- 0.1A or 2%, whichever is greater)\n2A?200A (accuracy +/- 0.1A or 2.5%, whichever is greater)
\n \t- Three channels measurement ranges:\n1A?60A (accuracy +/- 0.1A or 2%, whichever is greater)\n2A?200A (accuracy +/- 0.1A or 2.5%, whichever is greater)\n2A-600A (accuracy +/- 1A or 3%, whichever is greater)
\n
\n \n \t- Self-powered using ultra-low energy from the measured conductor, so there?s no need for batteries or wiring
\n \t- Clamps simply clip around cables with no interruption to electrical supply. The wireless transmitter attaches outside the panel for reliable wireless data transmission
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n \t- 928 MHz for Japan (ARIB specification)
\n
\n \n \t- EnOcean Equipment Profile (EEP): D2-32-00, D2-32-02
\n \t- No recurring fees. Access the data through your chosen platform, without any additional costs from Presssac.
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures.
\n \t- Packaging unit: single
\n
\n
\nDownload product sheet\nWireless smart sensor and connected technology
\n\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\nLearn more about Pressac's sensor technology\nEasily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\nLearn more about accessing and integrating sensor data" EnOcean Wireless Single Channel CT Clamp https://www.enocean-alliance.org/wireless-single-channel-ct-clamp-pressac/ https://www.enocean-alliance.org/wp-content/uploads/2021/06/1ChanCT-Clamp_v2-1.jpg CTV3_902_1CH_060A, CTV3_902_1CH_200A Pressac Metering Sensor, Wireless Sensors 902 MHz: USA, Canada D2-32-00 Certified Level 2
504059 "Measure energy consumption at a circuit, zone or machine level, in real time
\nPressac's wireless current sensors (CT) measure the alternating current (AC) and report the average of 5 measurements every 30 seconds.\n\nThe small, energy-harvesting devices use ultra-low power wireless and battery-less technology making them easy to install and very low maintenance. They simply clip around a cable and the wireless transmitter attaches outside the panel for reliable wireless data transmission. They can easily be fitted inside a machinery panel, distribution panel or other suitable location.\n\nWireless, self-powered current sensors\nThey simply clip around a cable and measure the electrical current, so there?s no interruption to the electrical supply\n\nReports current every 30 seconds\nSensors measure AC current (50Hz or 60Hz) and reports average of 5 measurements every 30 seconds\n\nAccess real-time data locally or in the cloud\nUsing our Smart Gateway, data is encrypted and sent locally or to your chosen cloud platform via MQTT\nFeatures
\n\n
\n \t- Sensors measure AC current (50Hz or 60Hz). Reports average of 5 measurements every 30 seconds
\n \t- Single-channel (single-phase) clamps measure the electrical current flowing in a single cable, while three-channel (3-phase) clamps measure current in 3 individual cables. Normally you will find single-phase systems in, for instance, households and office buildings. In the industry and for heavier machines, three-phase electric power is typically used.\n
\n \t- One channel measurement ranges:\n1A?60A (accuracy +/- 0.1A or 2%, whichever is greater)\n2A?200A (accuracy +/- 0.1A or 2.5%, whichever is greater)
\n \t- Three channels measurement ranges:\n1A?60A (accuracy +/- 0.1A or 2%, whichever is greater)\n2A?200A (accuracy +/- 0.1A or 2.5%, whichever is greater)\n2A-600A (accuracy +/- 1A or 3%, whichever is greater)
\n
\n \n \t- Self-powered using ultra-low energy from the measured conductor, so there?s no need for batteries or wiring
\n \t- Clamps simply clip around cables with no interruption to electrical supply. The wireless transmitter attaches outside the panel for reliable wireless data transmission
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n \t- 928 MHz for Japan (ARIB specification)
\n
\n \n \t- EnOcean Equipment Profile (EEP): D2-32-00, D2-32-02
\n \t- No recurring fees. Access the data through your chosen platform, without any additional costs from Presssac.
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures.
\n \t- Packaging unit: single
\n
\n
\nDownload product sheet\nWireless smart sensor and connected technology
\n\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\nLearn more about Pressac's sensor technology\nEasily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\nLearn more about accessing and integrating sensor data" EnOcean Wireless Three Channel CT Clamp https://www.enocean-alliance.org/wireless-three-channel-ct-clamp-pressac-2/ https://www.enocean-alliance.org/wp-content/uploads/2021/06/3ChanCTClamp_v2.jpg CTV3_928_3CH_060A, CTV3_928_3CH_200A, CTV3_928_3CH_600A Pressac Metering Sensor, Wireless Sensors 928 MHz: Japan, Australia D2-32-02 Certified Level 2
504057 "Measure energy consumption at a circuit, zone or machine level, in real time
\nPressac's wireless current sensors (CT) measure the alternating current (AC) and report the average of 5 measurements every 30 seconds.\n\nThe small, energy-harvesting devices use ultra-low power wireless and battery-less technology making them easy to install and very low maintenance. They simply clip around a cable and the wireless transmitter attaches outside the panel for reliable wireless data transmission. They can easily be fitted inside a machinery panel, distribution panel or other suitable location.\n\nWireless, self-powered current sensors\nThey simply clip around a cable and measure the electrical current, so there?s no interruption to the electrical supply\n\nReports current every 30 seconds\nSensors measure AC current (50Hz or 60Hz) and reports average of 5 measurements every 30 seconds\n\nAccess real-time data locally or in the cloud\nUsing our Smart Gateway, data is encrypted and sent locally or to your chosen cloud platform via MQTT\nFeatures
\n\n
\n \t- Sensors measure AC current (50Hz or 60Hz). Reports average of 5 measurements every 30 seconds
\n \t- Single-channel (single-phase) clamps measure the electrical current flowing in a single cable, while three-channel (3-phase) clamps measure current in 3 individual cables. Normally you will find single-phase systems in, for instance, households and office buildings. In the industry and for heavier machines, three-phase electric power is typically used.\n
\n \t- One channel measurement ranges:\n1A?60A (accuracy +/- 0.1A or 2%, whichever is greater)\n2A?200A (accuracy +/- 0.1A or 2.5%, whichever is greater)
\n \t- Three channels measurement ranges:\n1A?60A (accuracy +/- 0.1A or 2%, whichever is greater)\n2A?200A (accuracy +/- 0.1A or 2.5%, whichever is greater)\n2A-600A (accuracy +/- 1A or 3%, whichever is greater)
\n
\n \n \t- Self-powered using ultra-low energy from the measured conductor, so there?s no need for batteries or wiring
\n \t- Clamps simply clip around cables with no interruption to electrical supply. The wireless transmitter attaches outside the panel for reliable wireless data transmission
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n \t- 928 MHz for Japan (ARIB specification)
\n
\n \n \t- EnOcean Equipment Profile (EEP): D2-32-00, D2-32-02
\n \t- No recurring fees. Access the data through your chosen platform, without any additional costs from Presssac.
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures.
\n \t- Packaging unit: single
\n
\n
\nDownload product sheet\nWireless smart sensor and connected technology
\n\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\nLearn more about Pressac's sensor technology\nEasily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\nLearn more about accessing and integrating sensor data" EnOcean Wireless Three Channel CT Clamp https://www.enocean-alliance.org/wireless-three-channel-ct-clamp-pressac/ https://www.enocean-alliance.org/wp-content/uploads/2021/06/3ChanCTClamp_v2-1.jpg CTV3_902_3CH_060A, CTV3_902_3CH_200A, CTV3_902_3CH_600A Pressac Metering Sensor, Wireless Sensors 902 MHz: USA, Canada D2-32-02 Certified Level 2
504039 "Measure and monitor ambient, surface or liquid temperatures, in real time
\nPressac's wireless three-channel temperature sensors allow you to measure and monitor ambient, surface or liquid temperatures in a room, machine or inside a pipe, at up to three different points. The small, battery-powered devices use ultra-low power wireless technology making them easy to install and very low maintenance.\n\nSee live temperatures\nMonitor ambient, surface or liquid temperatures in a room, machine or inside a pipe, at up to three different points\n\nMonitor temperature over time\nMonitor changes in normal operating conditions to automatically detect failure or faults as they happen\n\nAutomate precision climate controls\nMaintain ideal conditions and achieve the most efficient environment by automating controls\nFeatures
\n\n
\n \t- Measures temperature every 30 seconds (default) in three\nseparate channels. Measurement range: -20 to 100°C (accuracy +/- 1°C)
\n \t- Measurements can be configured between 30 seconds\nand 3,600 seconds/60 minutes
\n \t- Accepts up to three industry-standard PT1000 probes
\n \t- Battery-powered ? battery typically lasts up to 10 years
\n \t- IP65 rated meaning it can be used near dust and water
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n
\n \n \t- EnOcean Equipment Profile (EEP): D2-0A-01
\n \t- No recurring fees. Access the data through your chosen platform, without any additional costs from Presssac.
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures.
\n \t- Dimensions: 110 x 80 x 66 mm (approx)
\n \t- Packaging unit: single
\n
\n
\nDownload product sheet\nWireless smart sensor and connected technology
\n\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\nLearn more about Pressac's sensor technology\nEasily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\nLearn more about accessing and integrating sensor data" EnOcean Wireless Three Channel Temperature Sensor https://www.enocean-alliance.org/three-channel-temperature-sensor-pressac-2/ https://www.enocean-alliance.org/wp-content/uploads/2021/06/3ChanTempSensor.jpg 3CHTEMP_E868_S Pressac Temperature Sensor, Wireless Sensors 868MHz (ASK): EU (and potentially others e.g. Non-EU Europe, China, Singapure?) D2-0A-01 Certified Level 2
504037 "Measure and monitor ambient, surface or liquid temperatures, in real time
\nPressac's wireless three-channel temperature sensors allow you to measure and monitor ambient, surface or liquid temperatures in a room, machine or inside a pipe, at up to three different points. The small, battery-powered devices use ultra-low power wireless technology making them easy to install and very low maintenance.\n\nSee live temperatures\nMonitor ambient, surface or liquid temperatures in a room, machine or inside a pipe, at up to three different points\n\nMonitor temperature over time\nMonitor changes in normal operating conditions to automatically detect failure or faults as they happen\n\nAutomate precision climate controls\nMaintain ideal conditions and achieve the most efficient environment by automating controls\nFeatures
\n\n
\n \t- Measures temperature every 30 seconds (default) in three\nseparate channels. Measurement range: -20 to 100°C (accuracy +/- 1°C)
\n \t- Measurements can be configured between 30 seconds\nand 3,600 seconds/60 minutes
\n \t- Accepts up to three industry-standard PT1000 probes
\n \t- Battery-powered ? battery typically lasts up to 10 years
\n \t- IP65 rated meaning it can be used near dust and water
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n
\n \n \t- EnOcean Equipment Profile (EEP): D2-0A-01
\n \t- No recurring fees. Access the data through your chosen platform, without any additional costs from Presssac.
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures.
\n \t- Dimensions: 110 x 80 x 66 mm (approx)
\n \t- Packaging unit: single
\n
\n
\nDownload product sheet\nWireless smart sensor and connected technology
\n\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\nLearn more about Pressac's sensor technology\nEasily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\nLearn more about accessing and integrating sensor data" EnOcean Wireless Three Channel Temperature Sensor https://www.enocean-alliance.org/three-channel-temperature-sensor-pressac/ https://www.enocean-alliance.org/wp-content/uploads/2021/06/3ChanTempSensor-1.jpg 3CHTEMP_E902_S Pressac Temperature Sensor, Wireless Sensors 902 MHz: USA, Canada D2-0A-01 Certified Level 2
504019 "Measure the indoor air quality in each room or zone
\nOur wireless multi-sensors measure and monitor the carbon dioxide (CO2) levels, ambient temperature and relative humidity in a room or zone. The small wireless CO2 sensors simply stick onto the wall and are solar-powered using ambient room light, making them easy to install and very low maintenance.\n\nSee live indoor environment quality\nAccess live data to get an instant view of ambient conditions in each room\n\nMonitor conditions in each room over time\nMeasure conditions in each room or zone to see how conditions change through the day\n\nImplement demand-driven control\nFeed live data into your building management system for demand-driven HVAC control\nFeatures
\n\n
\n \t- Small, discreet sensors simply stick to the wall
\n \t- Measures ambient carbon dioxide (CO2), temperature and relative humidity:\n
\n \t- CO2 0-2550PPM (accuracy +/- 125PPM)
\n \t- Temperature 0-51șC (accuracy +/- 0.5șC)
\n \t- Humidity 0-100% RH (accuracy +/- 5%)
\n
\n \n \t- Reports every 5 minutes when solar-powered or 15 minutes\nwhen battery-powered.
\n \t- Solar-powered using ambient room light ? optimally angled\nto absorb light ? with a battery back-up for periodic\nlow-light conditions. Batteries typically last up to 10 years
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n \t- 928 MHz for Japan (ARIB specification)
\n
\n \n \t- EnOcean Equipment Profile (EEP): A5-09-04
\n \t- No recurring fees. Access the data through your chosen platform, without any additional costs from Presssac.
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures.
\n \t- Dimensions: 115 x 80 x 35 mm (approx)
\n \t- Packaging unit: single
\n
\n
\nDownload product sheet\nWireless smart sensor and connected technology
\n\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\nLearn more about Pressac's sensor technology\nEasily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\nLearn more about accessing and integrating sensor data\n\n " EnOcean Wireless CO2, Temperature and Humidity Sensor https://www.enocean-alliance.org/wireless-co2-temperature-and-humidity-sensor-pressac-2/ https://www.enocean-alliance.org/wp-content/uploads/2021/06/Temp_Hum_Sensor.jpg 60_CO2_SLR_TMP_HUM_928 Pressac CO2 / Air Quality Sensor, Humidity Sensor, Temperature Sensor, Wireless Sensors 928 MHz: Japan, Australia A5-09-04 Certified Level 2
504017 "Measure the indoor air quality in each room or zone
\nOur wireless multi-sensors measure and monitor the carbon dioxide (CO2) levels, ambient temperature and relative humidity in a room or zone. The small wireless CO2 sensors simply stick onto the wall and are solar-powered using ambient room light, making them easy to install and very low maintenance.\n\nSee live indoor environment quality\nAccess live data to get an instant view of ambient conditions in each room\n\nMonitor conditions in each room over time\nMeasure conditions in each room or zone to see how conditions change through the day\n\nImplement demand-driven control\nFeed live data into your building management system for demand-driven HVAC control\nFeatures
\n\n
\n \t- Small, discreet sensors simply stick to the wall
\n \t- Measures ambient carbon dioxide (CO2), temperature and relative humidity:\n
\n \t- CO2 0-2550PPM (accuracy +/- 125PPM)
\n \t- Temperature 0-51șC (accuracy +/- 0.5șC)
\n \t- Humidity 0-100% RH (accuracy +/- 5%)
\n
\n \n \t- Reports every 5 minutes when solar-powered or 15 minutes\nwhen battery-powered.
\n \t- Solar-powered using ambient room light ? optimally angled\nto absorb light ? with a battery back-up for periodic\nlow-light conditions. Batteries typically last up to 10 years
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n \t- 928 MHz for Japan (ARIB specification)
\n
\n \n \t- EnOcean Equipment Profile (EEP): A5-09-04
\n \t- No recurring fees. Access the data through your chosen platform, without any additional costs from Presssac.
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures.
\n \t- Dimensions: 115 x 80 x 35 mm (approx)
\n \t- Packaging unit: single
\n
\n
\nDownload product sheet\nWireless smart sensor and connected technology
\n\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\nLearn more about Pressac's sensor technology\nEasily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\nLearn more about accessing and integrating sensor data\n\n " EnOcean Wireless CO2, Temperature and Humidity Sensor https://www.enocean-alliance.org/wireless-co2-temperature-and-humidity-sensor-pressac/ https://www.enocean-alliance.org/wp-content/uploads/2021/06/Temp_Hum_Sensor-1.jpg 60_CO2_SLR_TMP_HUM_902 Pressac CO2 / Air Quality Sensor, Humidity Sensor, Temperature Sensor, Wireless Sensors 902 MHz: USA, Canada A5-09-04 Certified Level 2
502865 "Know whether doors and windows are open or closed, in real time
\nPressac's wireless current sensors (CT) measure the alternating current (AC) and report the average of 5 measurements every 30 seconds.\n\nThe small, energy-harvesting devices use ultra-low power wireless and battery-less technology making them easy to install and very low maintenance. They simply clip around a cable and the wireless transmitter attaches outside the panel for reliable wireless data transmission. They can easily be fitted inside a machinery panel, distribution panel or other suitable location.\n\nAutomatically detect open doors\nAccess live data to know when doors or windows around your building are open or closes\n\nMonitor for changes\nMonitor each door ? including windows, cupboards, cabinets and fridges ? to automatically detect changes\n\nAutomate building management\nAutomate building management processes based on live conditions\nFeatures
\n\n
\n \t- Use magnetic fields to detect open/close status. Reports open/close changes in real time and status updates every 15 minutes
\n \t- Solar-powered using ambient room light. Optional back-up battery for low-light conditions ? battery typically lasts up to 10 years
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n \t- 928 MHz for Japan (ARIB specification)
\n
\n \n \t- Dimensions:\n
\n \t- Sensor: 76.5 x 28 x 17.5 mm (approx)
\n \t- Magnet: 62 x 12 x 13 mm (approx)
\n
\n \n \t- EnOcean Equipment Profile (EEP): D5-00-01
\n \t- No recurring fees. Access the data through your chosen platform, without any additional costs from Presssac.
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures.
\n \t- Packaging unit: single
\n
\n
\nDownload product sheet\nWireless smart sensor and connected technology
\n\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\nLearn more about Pressac's sensor technology\nEasily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\nLearn more about accessing and integrating sensor data" EnOcean Wireless Door and Window Sensor https://www.enocean-alliance.org/wireless-door-and-window-sensor-pressac-mini-series/ https://www.enocean-alliance.org/wp-content/uploads/2021/06/DoorWindow_Mini.jpg MS_DOOR_WIN_BAT_902 Pressac Position Sensor, Wireless Sensors 902 MHz: USA, Canada D5-00-01 Certified Level 3
502851 "Get real-time alerts about the contact status of essential equipment, such as UPS status, security systems, fire alarms or air conditioning units
\nOur wireless dry contact sensors monitor the status of any equipment that has a volt-free, dry contact output, such as UPS status, security systems, fire alarms or air conditioning units. The small, energy harvesting devices use ultra-low power wireless and battery-less technology, making them easy to install and very low maintenance.\n\nReports live contact status\nA dry contact sensor can be used to monitor the open/close status of any piece of equipment that has a contact point, or reed switch\n\nGet updates as status changes\nKnow the live status and get instant updates if contact status changes\n\nTrack status over time\nMonitor equipment status in you IoT platform, BMS system or other software\nFeatures
\n\n
\n \t- Reports dry contact status changes in real-time and status\nupdates every 15 minutes
\n \t- Small, discreet sensors simply stick to a wall or side of the equipment
\n \t- Connect to the device using a push-wire connection of two wires
\n \t- Solar-powered using ambient room light. Optional battery back-up for periodic low-light conditions ? battery typically last up to 10 years
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n \t- 928 MHz for Japan (ARIB specification)
\n
\n \n \t- EnOcean Equipment Profile (EEP): D5-00-01
\n \t- No recurring fees. Access the data through your chosen platform, without any additional costs from Presssac.
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures.
\n \t- Dimensions: 76.5 x 28 x 17.5 mm (approx)
\n \t- Packaging unit: single
\n
\n
\nDownload product sheet\nWireless smart sensor and connected technology
\n\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\nLearn more about Pressac's sensor technology\nEasily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\nLearn more about accessing and integrating sensor data" EnOcean Wireless Dry Contact Sensor https://www.enocean-alliance.org/wireless-dry-contact-sensor-pressac-mini-series/ https://www.enocean-alliance.org/wp-content/uploads/2021/06/DryContactSensor_Mini.jpg MS_DRY_CON_BAT_902 Pressac Wireless Sensors 902 MHz: USA, Canada D5-00-01 Certified Level 3
502843 "Measure and monitor the ambient thermal conditions in each room or zone, in real time
\nOur wireless multi-sensors measure the ambient temperature and relative humidity in each room, cabinet or zone. The small, solar-powered sensors use ultra-low power wireless technology, making them easy to install and very low maintenance. Optional battery back-up version available for low-light environments.\n\nMeasure live ambient conditions\nAccess live data to get an instant view of ambient conditions in each room or zone\n\nGet updates as conditions change\nMonitor climate and get instant updates if temperature or humidity changes\n\nImplement precision climate controls\nFeed live data into your building management system for demand-driven HVAC control\nFeatures
\n\n
\n \t- Small, discreet sensors simply stick to the wall or cabinet
\n \t- Measures temperature and relative humidity:\n
\n \t- Temperature 0-40șC (+/- 0.5șC between 17-27°C otherwise +/- 1°C)
\n \t- Humidity 0-100% RH (+/- 5% between 30-70%)
\n
\n \n \t- Reports if the temperature changes by more than 0.5°C or humidity changes by more than 2%, otherwise updates every 15 minutes
\n \t- Solar-powered using ambient room light. Optional battery back-up for periodic low-light conditions ? battery typically last up to 10 years
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n \t- 928 MHz for Japan (ARIB specification)
\n
\n \n \t- EnOcean Equipment Profile (EEP): A5-04-01
\n \t- No recurring fees. Access the data through your chosen platform, without any additional costs from Presssac.
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures.
\n \t- Dimensions: 76.5 x 28 x 17.5 mm (approx)
\n \t- Packaging unit: single
\n
\n
\nDownload product sheet\nWireless smart sensor and connected technology
\n\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\nLearn more about Pressac's sensor technology\nEasily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\nLearn more about accessing and integrating sensor data" EnOcean Wireless Temperature and Humidity Sensor https://www.enocean-alliance.org/wireless-temperature-and-humidity-sensor-pressac-mini-series/ https://www.enocean-alliance.org/wp-content/uploads/2021/06/TempHumid_Mini.jpg MS_TEMP_HUM_BAT_902 Pressac Humidity Sensor, Temperature Sensor, Wireless Sensors 902 MHz: USA, Canada A5-04-01 Certified Level 3
502826 "Measure and monitor changes in ambient temperature in each room, cabinet or zone, in real time
\nOur wireless temperature sensors measure the ambient temperature in each room, cabinet or zone. The small, solar-powered sensors use ultra-low power wireless technology, making them easy to install and very low maintenance. Optional battery back-up available for low-light environments.\n\nMeasure live temperature\nAccess live data to get an instant view of ambient temperature in each room, cabinet or zone\n\nGet updates as temperature changes\nMonitor thermal conditions and get instant updates if temperature changes by more than 0.5șC\n\nMonitor temperature over time\nTrack temperature in each space, over time, to implement more efficient heating and cooling controls\nFeatures
\n\n
\n \t- Small, discreet sensors simply stick to the wall or cabinet
\n \t- Measures ambient temperature 0-40șC (+/- 0.5șC between 17-27°C otherwise +/- 1°C)
\n \t- Reports if the temperature changes by more than 0.5°C, otherwise updates every 15 minutes
\n \t- Solar-powered using ambient room light. Optional battery back-up for periodic low-light conditions ? batteries typically last up to 10 years
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n \t- 928 MHz for Japan (ARIB specification)
\n
\n \n \t- EnOcean Equipment Profile (EEP): A5-02-05
\n \t- No recurring fees. Access the data through your chosen platform, without any additional costs from Presssac.
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures.
\n \t- Dimensions: 76.5 x 28 x 17.5 mm (approx)
\n \t- Packaging unit: single
\n
\n
\nDownload product sheet\nWireless smart sensor and connected technology
\n\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\nLearn more about Pressac's sensor technology\nEasily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\nLearn more about accessing and integrating sensor data" EnOcean Wireless Temperature Sensor https://www.enocean-alliance.org/wireless-temperature-sensor-pressac-mini-series/ https://www.enocean-alliance.org/wp-content/uploads/2021/06/Temp_Mini.jpg MS_TEMP_BAT_902 Pressac Temperature Sensor, Wireless Sensors 902 MHz: USA, Canada A5-02-05 Certified Level 3
502720 "Get instant access to real-time data locally or in the cloud
\nOur smart gateway receives live data from multiple sensors, converts it into easy-to-use JSON format and makes it available locally or in the cloud, via MQTT. Enabling you to easily integrate live sensor data into your existing IoT platform, software application or Google Sheets. In simple terms, the gateway receives data from the sensors and makes it usable.\n\nConverts data into easy-to-use JSON format\nConverts EnOcean sensor data telegrams into an easy-to-use JSON (JavaScript Object Notation) format\n\nSends data locally or to the cloud via MQTT\nSends data locally or to the cloud ? via Ethernet, LTE (4G) or WiFi ? to any MQTT broker\n\nConnects directly with IoT platforms\nReady-made secure connections with leading IoT platforms including IBM Watson, AWS loT and Microsoft Azure Core\nFeatures
\n\n
\n \t- Receives EnOcean sensor telegrams via the EnOcean wireless radio protocol:\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n
\n \n \t- Gateway interface allows you to easily connect to devices in range, name each sensor device, add location info, and manage data and security settings
\n \t- Converts sensor data into JSON (JavaScript Object Notation) format, time-stamps and sends it to up to 5 user-defined MQTT brokers
\n \t- Remote management using MQTT
\n \t- Transmits data via ethernet cable, WiFi or LTE (4G) (ethernet only version available). Failovers can be configured to automatically switch to a backup if needed
\n \t- Includes ready-made secure (TLS) connections to IBM Watson, AWS loT and Microsoft Azure Core platforms for cloud storage and processing
\n \t- Includes a ready-made connection with Google Sheets for testing and trialling
\n \t- Includes a ready-made connection with the Node-red application for simple visualisation
\n \t- Small, fanless compact design
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures
\n \t- Dimensions: 150 x 85 x 28 mm (approx)
\n \t- Packaging unit: single (min. 25 pcs)
\n
\n
Download product sheet\n
Wireless smart sensor and connected technology
\n
\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\n
Learn more about Pressac's sensor technology\n
Easily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n
\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\n
Learn more about accessing and integrating sensor data\n\n
" EnOcean Smart Gateway (PEG - E) https://www.enocean-alliance.org/pressac-enocean-gateway-peg-e-2/ https://www.enocean-alliance.org/wp-content/uploads/2021/06/Main-Gateway-1.jpg PEG_902_E Pressac Gateway & Building Management Systems 902 MHz: USA, Canada A5-12-00, A5-12-03, D2-32-00, D2-32-01, D2-32-02, A5-09-04, D2-0A-00, D2-0A-01, A5-07-01, F6-02-01, A5-04-01, A5-02-05, D5-00-01, F6-05-01, A5-12-01, A5-06-02, A5-09-07, A5-3F-7F, A5-07-03, A5-14-05, A5-30-01, A5-04-03, D2-03-0A, D2-14-53, D2-14-5C, D2-14-5D Certified Level 2
498833 "Get instant access to real-time data locally or in the cloud
\nOur smart gateway receives live data from multiple sensors, converts it into easy-to-use JSON format and makes it available locally or in the cloud, via MQTT. Enabling you to easily integrate live sensor data into your existing IoT platform, software application or Google Sheets. In simple terms, the gateway receives data from the sensors and makes it usable.\n\nConverts data into easy-to-use JSON format\nConverts EnOcean sensor data telegrams into an easy-to-use JSON (JavaScript Object Notation) format\n\nSends data locally or to the cloud via MQTT\nSends data locally or to the cloud ? via Ethernet, LTE (4G) or WiFi ? to any MQTT broker\n\nConnects directly with IoT platforms\nReady-made secure connections with leading IoT platforms including IBM Watson, AWS loT and Microsoft Azure Core\nFeatures
\n\n
\n \t- Receives EnOcean sensor telegrams via the EnOcean wireless radio protocol:\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n
\n \n \t- Gateway interface allows you to easily connect to devices in range, name each sensor device, add location info, and manage data and security settings
\n \t- Converts sensor data into JSON (JavaScript Object Notation) format, time-stamps and sends it to up to 5 user-defined MQTT brokers
\n \t- Remote management using MQTT
\n \t- Transmits data via ethernet cable, WiFi or LTE (4G) (ethernet only version available). Failovers can be configured to automatically switch to a backup if needed
\n \t- Includes ready-made secure (TLS) connections to IBM Watson, AWS loT and Microsoft Azure Core platforms for cloud storage and processing
\n \t- Includes a ready-made connection with Google Sheets for testing and trialling
\n \t- Includes a ready-made connection with the Node-red application for simple visualisation
\n \t- Small, fanless compact design
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures
\n \t- Dimensions: 150 x 85 x 28 mm (approx)
\n \t- Packaging unit: single (min. 25 pcs)
\n
\n
Download product sheet\n
Wireless smart sensor and connected technology
\n
\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\n
Learn more about Pressac's sensor technology\n
Easily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n
\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\n
Learn more about accessing and integrating sensor data\n\n
" EnOcean Smart Gateway (PEG - E) https://www.enocean-alliance.org/pressac-enocean-gateway-peg-e/ https://www.enocean-alliance.org/wp-content/uploads/2021/06/Main-Gateway-2.jpg PEG_868_E Pressac Gateway & Building Management Systems 868MHz (ASK): EU (and potentially others e.g. Non-EU Europe, China, Singapure?) A5-12-00, A5-12-03, D2-32-00, D2-32-01, D2-32-02, A5-09-04, D2-0A-00, D2-0A-01, A5-07-01, F6-02-01, A5-04-01, A5-02-05, D5-00-01, F6-05-01, A5-12-01, A5-06-02, A5-09-07, A5-3F-7F, A5-07-03, A5-14-05, A5-30-01, A5-04-03, D2-03-0A, D2-14-53, D2-14-5C, D2-14-5D Certified Level 3
282051 "Get instant access to real-time data locally or in the cloud
\nOur smart gateway receives live data from multiple sensors, converts it into easy-to-use JSON format and makes it available locally or in the cloud, via MQTT. Enabling you to easily integrate live sensor data into your existing IoT platform, software application or Google Sheets. In simple terms, the gateway receives data from the sensors and makes it usable.\n\nConverts data into easy-to-use JSON format\nConverts EnOcean sensor data telegrams into an easy-to-use JSON (JavaScript Object Notation) format\n\nSends data locally or to the cloud via MQTT\nSends data locally or to the cloud ? via Ethernet, LTE (4G) or WiFi ? to any MQTT broker\n\nConnects directly with IoT platforms\nReady-made secure connections with leading IoT platforms including IBM Watson, AWS loT and Microsoft Azure Core\nFeatures
\n\n
\n \t- Receives EnOcean sensor telegrams via the EnOcean wireless radio protocol:\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n
\n \n \t- Gateway interface allows you to easily connect to devices in range, name each sensor device, add location info, and manage data and security settings
\n \t- Converts sensor data into JSON (JavaScript Object Notation) format, time-stamps and sends it to up to 5 user-defined MQTT brokers
\n \t- Remote management using MQTT
\n \t- Transmits data via ethernet cable, WiFi or LTE (4G) (ethernet only version available). Failovers can be configured to automatically switch to a backup if needed
\n \t- Includes ready-made secure (TLS) connections to IBM Watson, AWS loT and Microsoft Azure Core platforms for cloud storage and processing
\n \t- Includes a ready-made connection with Google Sheets for testing and trialling
\n \t- Includes a ready-made connection with the Node-red application for simple visualisation
\n \t- Small, fanless compact design
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures
\n \t- Dimensions: 150 x 85 x 28 mm (approx)
\n \t- Packaging unit: single (min. 25 pcs)
\n
\n
Download product sheet\n
Wireless smart sensor and connected technology
\n
\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\n
Learn more about Pressac's sensor technology\n
Easily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n
\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\n
Learn more about accessing and integrating sensor data\n\n
" EnOcean Smart Gateway (PEG - ELW) https://www.enocean-alliance.org/smart-gateway/ https://www.enocean-alliance.org/wp-content/uploads/2021/06/Main-Gateway-3.jpg PEG_868_ELW Pressac Gateway & Building Management Systems, Gateway: TCP/ IP 868MHz (ASK): EU (and potentially others e.g. Non-EU Europe, China, Singapure?) A5-12-00, A5-12-03, D2-32-00, D2-32-01, D2-32-02, A5-09-04, D2-0A-00, D2-0A-01, A5-07-01, F6-02-01, A5-04-01, A5-02-05, D5-00-01, F6-05-01, A5-12-01, A5-06-02, A5-09-07, A5-3F-7F, A5-07-03, A5-14-05, A5-30-01, A5-04-03, D2-03-0A, D2-14-53, D2-14-5C, D2-14-5D Certified Level 2
5636 "Measure the indoor air quality in each room or zone
\nOur wireless multi-sensors measure and monitor the carbon dioxide (CO2) levels, ambient temperature and relative humidity in a room or zone. The small wireless CO2 sensors simply stick onto the wall and are solar-powered using ambient room light, making them easy to install and very low maintenance.\n\nSee live indoor environment quality\nAccess live data to get an instant view of ambient conditions in each room\n\nMonitor conditions in each room over time\nMeasure conditions in each room or zone to see how conditions change through the day\n\nImplement demand-driven control\nFeed live data into your building management system for demand-driven HVAC control\nFeatures
\n\n
\n \t- Small, discreet sensors simply stick to the wall
\n \t- Measures ambient carbon dioxide (CO2), temperature and relative humidity:\n
\n \t- CO2 0-2550PPM (accuracy +/- 125PPM)
\n \t- Temperature 0-51șC (accuracy +/- 0.5șC)
\n \t- Humidity 0-100% RH (accuracy +/- 5%)
\n
\n \n \t- Reports every 5 minutes when solar-powered or 15 minutes\nwhen battery-powered.
\n \t- Solar-powered using ambient room light ? optimally angled\nto absorb light ? with a battery back-up for periodic\nlow-light conditions. Batteries typically last up to 10 years
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n \t- 928 MHz for Japan (ARIB specification)
\n
\n \n \t- EnOcean Equipment Profile (EEP): A5-09-04
\n \t- No recurring fees. Access the data through your chosen platform, without any additional costs from Presssac.
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures.
\n \t- Dimensions: 115 x 80 x 35 mm (approx)
\n \t- Packaging unit: single
\n
\n
\nDownload product sheet\nWireless smart sensor and connected technology
\n\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\nLearn more about Pressac's sensor technology\nEasily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\nLearn more about accessing and integrating sensor data\n\n " EnOcean Wireless CO2, Temperature and Humidity Sensor https://www.enocean-alliance.org/pressac_co2_temperature_humidity_sensor/ https://www.enocean-alliance.org/wp-content/uploads/2021/06/Temp_Hum_Sensor-2.jpg 60_CO2_SLR_TMP_HUM_868 Pressac CO2 / Air Quality Sensor, Humidity Sensor, Temperature Sensor, Wireless Sensors 868MHz (ASK): EU (and potentially others e.g. Non-EU Europe, China, Singapure?) A5-09-04 Certified Level 2
196781 "Measure and monitor changes in ambient temperature in each room, cabinet or zone, in real time
\nOur wireless temperature sensors measure the ambient temperature in each room, cabinet or zone. The small, solar-powered sensors use ultra-low power wireless technology, making them easy to install and very low maintenance. Optional battery back-up available for low-light environments.\n\nMeasure live temperature\nAccess live data to get an instant view of ambient temperature in each room, cabinet or zone\n\nGet updates as temperature changes\nMonitor thermal conditions and get instant updates if temperature changes by more than 0.5șC\n\nMonitor temperature over time\nTrack temperature in each space, over time, to implement more efficient heating and cooling controls\nFeatures
\n\n
\n \t- Small, discreet sensors simply stick to the wall or cabinet
\n \t- Measures ambient temperature 0-40șC (+/- 0.5șC between 17-27°C otherwise +/- 1°C)
\n \t- Reports if the temperature changes by more than 0.5°C, otherwise updates every 15 minutes
\n \t- Solar-powered using ambient room light. Optional battery back-up for periodic low-light conditions ? batteries typically last up to 10 years
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n \t- 928 MHz for Japan (ARIB specification)
\n
\n \n \t- EnOcean Equipment Profile (EEP): A5-02-05
\n \t- No recurring fees. Access the data through your chosen platform, without any additional costs from Presssac.
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures.
\n \t- Dimensions: 76.5 x 28 x 17.5 mm (approx)
\n \t- Packaging unit: single
\n
\n
\nDownload product sheet\nWireless smart sensor and connected technology
\n\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\nLearn more about Pressac's sensor technology\nEasily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\nLearn more about accessing and integrating sensor data" EnOcean Wireless Temperature Sensor https://www.enocean-alliance.org/temperature-sensor-mini-series/ https://www.enocean-alliance.org/wp-content/uploads/2021/06/Temp_Mini-1.jpg MS_TEMP_BAT_868 Pressac Temperature Sensor, Wireless Sensors 868MHz (ASK): EU (and potentially others e.g. Non-EU Europe, China, Singapure?) A5-02-05 Certified Level 3
196754 "Measure and monitor the ambient thermal conditions in each room or zone, in real time
\nOur wireless multi-sensors measure the ambient temperature and relative humidity in each room, cabinet or zone. The small, solar-powered sensors use ultra-low power wireless technology, making them easy to install and very low maintenance. Optional battery back-up version available for low-light environments.\n\nMeasure live ambient conditions\nAccess live data to get an instant view of ambient conditions in each room or zone\n\nGet updates as conditions change\nMonitor climate and get instant updates if temperature or humidity changes\n\nImplement precision climate controls\nFeed live data into your building management system for demand-driven HVAC control\nFeatures
\n\n
\n \t- Small, discreet sensors simply stick to the wall or cabinet
\n \t- Measures temperature and relative humidity:\n
\n \t- Temperature 0-40șC (+/- 0.5șC between 17-27°C otherwise +/- 1°C)
\n \t- Humidity 0-100% RH (+/- 5% between 30-70%)
\n
\n \n \t- Reports if the temperature changes by more than 0.5°C or humidity changes by more than 2%, otherwise updates every 15 minutes
\n \t- Solar-powered using ambient room light. Optional battery back-up for periodic low-light conditions ? battery typically last up to 10 years
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n \t- 928 MHz for Japan (ARIB specification)
\n
\n \n \t- EnOcean Equipment Profile (EEP): A5-04-01
\n \t- No recurring fees. Access the data through your chosen platform, without any additional costs from Presssac.
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures.
\n \t- Dimensions: 76.5 x 28 x 17.5 mm (approx)
\n \t- Packaging unit: single
\n
\n
\nDownload product sheet\nWireless smart sensor and connected technology
\n\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\nLearn more about Pressac's sensor technology\nEasily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\nLearn more about accessing and integrating sensor data" EnOcean Wireless Temperature and Humidity Sensor https://www.enocean-alliance.org/temperature-and-humidity-sensor-mini-series/ https://www.enocean-alliance.org/wp-content/uploads/2021/06/TempHumid_Mini-1.jpg MS_TEMP_HUM_BAT_868 Pressac Humidity Sensor, Temperature Sensor, Wireless Sensors 868MHz (ASK): EU (and potentially others e.g. Non-EU Europe, China, Singapure?) A5-04-01 Certified Level 3
196703 "Get real-time alerts about the contact status of essential equipment, such as UPS status, security systems, fire alarms or air conditioning units
\nOur wireless dry contact sensors monitor the status of any equipment that has a volt-free, dry contact output, such as UPS status, security systems, fire alarms or air conditioning units. The small, energy harvesting devices use ultra-low power wireless and battery-less technology, making them easy to install and very low maintenance.\n\nReports live contact status\nA dry contact sensor can be used to monitor the open/close status of any piece of equipment that has a contact point, or reed switch\n\nGet updates as status changes\nKnow the live status and get instant updates if contact status changes\n\nTrack status over time\nMonitor equipment status in you IoT platform, BMS system or other software\nFeatures
\n\n
\n \t- Reports dry contact status changes in real-time and status\nupdates every 15 minutes
\n \t- Small, discreet sensors simply stick to a wall or side of the equipment
\n \t- Connect to the device using a push-wire connection of two wires
\n \t- Solar-powered using ambient room light. Optional battery back-up for periodic low-light conditions ? battery typically last up to 10 years
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n \t- 928 MHz for Japan (ARIB specification)
\n
\n \n \t- EnOcean Equipment Profile (EEP): D5-00-01
\n \t- No recurring fees. Access the data through your chosen platform, without any additional costs from Presssac.
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures.
\n \t- Dimensions: 76.5 x 28 x 17.5 mm (approx)
\n \t- Packaging unit: single
\n
\n
\nDownload product sheet\nWireless smart sensor and connected technology
\n\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\nLearn more about Pressac's sensor technology\nEasily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\nLearn more about accessing and integrating sensor data" EnOcean Wireless Dry Contact Sensor https://www.enocean-alliance.org/dry-contact-sensor-mini-series/ https://www.enocean-alliance.org/wp-content/uploads/2021/06/DryContactSensor_Mini-1.jpg MS_DRY_CON_BAT_868 Pressac Wireless Sensors 868MHz (ASK): EU (and potentially others e.g. Non-EU Europe, China, Singapure?) D5-00-01 Certified Level 3
196694 "Know whether doors and windows are open or closed, in real time
\nPressac's wireless current sensors (CT) measure the alternating current (AC) and report the average of 5 measurements every 30 seconds.\n\nThe small, energy-harvesting devices use ultra-low power wireless and battery-less technology making them easy to install and very low maintenance. They simply clip around a cable and the wireless transmitter attaches outside the panel for reliable wireless data transmission. They can easily be fitted inside a machinery panel, distribution panel or other suitable location.\n\nAutomatically detect open doors\nAccess live data to know when doors or windows around your building are open or closes\n\nMonitor for changes\nMonitor each door ? including windows, cupboards, cabinets and fridges ? to automatically detect changes\n\nAutomate building management\nAutomate building management processes based on live conditions\nFeatures
\n\n
\n \t- Use magnetic fields to detect open/close status. Reports open/close changes in real time and status updates every 15 minutes
\n \t- Solar-powered using ambient room light. Optional back-up battery for low-light conditions ? battery typically lasts up to 10 years
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n \t- 928 MHz for Japan (ARIB specification)
\n
\n \n \t- Dimensions:\n
\n \t- Sensor: 76.5 x 28 x 17.5 mm (approx)
\n \t- Magnet: 62 x 12 x 13 mm (approx)
\n
\n \n \t- EnOcean Equipment Profile (EEP): D5-00-01
\n \t- No recurring fees. Access the data through your chosen platform, without any additional costs from Presssac.
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures.
\n \t- Packaging unit: single
\n
\n
\nDownload product sheet\nWireless smart sensor and connected technology
\n\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\nLearn more about Pressac's sensor technology\nEasily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\nLearn more about accessing and integrating sensor data" EnOcean Wireless Door and Window Sensor https://www.enocean-alliance.org/door-and-window-sensor-mini-series/ https://www.enocean-alliance.org/wp-content/uploads/2021/06/DoorWindow_Mini-1.jpg MS_DOOR_WIN_BAT_868 Pressac Position Sensor, Wireless Sensors 868MHz (ASK): EU (and potentially others e.g. Non-EU Europe, China, Singapure?) D5-00-01 Certified Level 3
533829 "Measure energy consumption at a circuit, zone or machine level, in real time
\nPressac's wireless current sensors (CT) measure the alternating current (AC) and report the average of 5 measurements every 30 seconds.\n\nThe small, energy-harvesting devices use ultra-low power wireless and battery-less technology making them easy to install and very low maintenance. They simply clip around a cable and the wireless transmitter attaches outside the panel for reliable wireless data transmission. They can easily be fitted inside a machinery panel, distribution panel or other suitable location.\n\nWireless, self-powered current sensors\nThey simply clip around a cable and measure the electrical current, so there?s no interruption to the electrical supply\n\nReports current every 30 seconds\nSensors measure AC current (50Hz or 60Hz) and reports average of 5 measurements every 30 seconds\n\nAccess real-time data locally or in the cloud\nUsing our Smart Gateway, data is encrypted and sent locally or to your chosen cloud platform via MQTT\nFeatures
\n\n
\n \t- Sensors measure AC current (50Hz or 60Hz). Reports average of 5 measurements every 30 seconds
\n \t- Single-channel (single-phase) clamps measure the electrical current flowing in a single cable, while three-channel (3-phase) clamps measure current in 3 individual cables. Normally you will find single-phase systems in, for instance, households and office buildings. In the industry and for heavier machines, three-phase electric power is typically used.\n
\n \t- One channel measurement ranges:\n1A?60A (accuracy +/- 0.1A or 2%, whichever is greater)\n2A?200A (accuracy +/- 0.1A or 2.5%, whichever is greater)
\n \t- Three channels measurement ranges:\n1A?60A (accuracy +/- 0.1A or 2%, whichever is greater)\n2A?200A (accuracy +/- 0.1A or 2.5%, whichever is greater)\n2A-600A (accuracy +/- 1A or 3%, whichever is greater)
\n
\n \n \t- Self-powered using ultra-low energy from the measured conductor, so there?s no need for batteries or wiring
\n \t- Clamps simply clip around cables with no interruption to electrical supply. The wireless transmitter attaches outside the panel for reliable wireless data transmission
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n \t- 928 MHz for Japan (ARIB specification)
\n
\n \n \t- EnOcean Equipment Profile (EEP): D2-32-00, D2-32-02
\n \t- No recurring fees. Access the data through your chosen platform, without any additional costs from Presssac.
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures.
\n \t- Packaging unit: single
\n
\n
\nDownload product sheet\nWireless smart sensor and connected technology
\n\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\nLearn more about Pressac's sensor technology\nEasily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\nLearn more about accessing and integrating sensor data" EnOcean Wireless Three Channel CT Clamp https://www.enocean-alliance.org/wireless-three-channel-ct-clamp-pressac-3/ https://www.enocean-alliance.org/wp-content/uploads/2021/07/3ChanCTClamp_v2-2.jpg CTV3_868_3CH_060A, CTV3_868_3CH_200A, CTV3_868_3CH_600A Pressac Metering Sensor, Wireless Sensors 868MHz (ASK): EU (and potentially others e.g. Non-EU Europe, China, Singapure?) D2-32-02 Certified Level 2
34104 "Accurately detect when a desk is occupied and monitor ongoing desk occupancy
\nPressac's wireless EnOcean desk occupancy sensors accurately detect and monitor passive infrared radiation (PIR) emitted by a person sitting at a desk. When a person enters the sensor?s field of view, the sensor detects motion and tells you someone is present within that space, without detecting people in the surrounding areas.\n\nGet instant desk occupancy updates\nThe small, discreet sensors simply stick to the underside of the desk and send an instant update when someone sits at a desk. You can configure ongoing occupancy updates every 10 minutes to 5 hours to maximise battery life.\n\nAccurate, reliable desk occupancy monitoring\nWith a narrow-angle, 180-degree radius PIR motion sensor, Pressac's desk sensors only pick up people at the desk, not people walking past or at other desks.\n\nAccess real-time data locally or in the cloud\nDesk occupancy data can be sent securely to a local network or the cloud ? via Ethernet, LTE (4G) or WiFi ? using Pressac?s smart gateway.\nFeatures
\n\n \t- Small, discreet sensors simply stick to the underside of the desk
\n \t- Narrow-angle passive infrared (PIR) sensor detects motion within 180-degree radius, enabling you to accurately detect movement under a desk, without detecting people in the surrounding areas
\n \t- Detection range within 0.5 meters based on typical desk height
\n \t- Sends instant updates when occupancy is detected
\n \t- The sensor continues to monitor the workspace and send you regular updates on whether it?s occupied or not. Status updates can be configured between 10 minutes and 5 hours
\n \t- They can be configured to allow for short ?absences? from the desk
\n \t- GDPR and privacy-compliant solution: no images or personal information stored or transmitted
\n \t- Ultra-low-power technology. Battery life typically 5+ years.
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free
\n \t- ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n
\n \n \t- EnOcean Equipment Profile (EEP): A5-07-01
\n \t- No recurring fees. Access the data through your chosen platform, without any additional costs from Presssac
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures.
\n \t- Dimensions: 93 x 65 x 28 mm (approx)
\n
\nDownload product sheet\nWireless smart sensor and connected technology
\n\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\nLearn more about Pressac's sensor technology\nEasily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\nLearn more about accessing and integrating sensor data" EnOcean Wireless Desk Occupancy Sensor https://www.enocean-alliance.org/under-desk-pir-sensor/ https://www.enocean-alliance.org/wp-content/uploads/2021/06/Desk_Occ.jpg PIR_180_BAT_WE_E868_[S]-[B] Pressac Occupancy Sensor, Wireless Sensors 868MHz (ASK): EU (and potentially others e.g. Non-EU Europe, China, Singapure?) A5-07-01 Certified Level 3
34136 "A cost-effective way to transmit EnOcean sensor signals over greater distances or around obstructions within a building
\nOur wireless smart repeater is a cost-effective way to increase the range of your smart devices, allowing them to transmit data over a larger distance or where obstructions occur. Depending on the configuration and the building, repeaters can extend the EnOcean sensors? range from 30m up to 90m.\n\nExtend EnOcean wireless range\nRepeaters can extend the wireless range of EnOcean sensors from 30m up to 90m within line of sight (LoS)\n\nWork around obstructions\nRepeaters can be used to redirect signals around obstructions to help create a clear signal between a sensor and gateway\n\nMinimise interference\nOur selective repeaters allow you to choose which sensors to repeat, reducing unnecessary signal interference\nFeatures
\n\n
\n \t- Extend wireless range of sensors up to 90m, depending on the configuration of a building
\n \t- Select which sensors to repeat to minimise unnecessary data being transmitted and maximise available bandwidth
\n \t- Fitted with external antenna
\n \t- Powered via USB
\n \t- Function as a level-1 or a level-2
\n \t- Radio link test mode
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n
\n \n \t- No recurring fees. Access the data through your chosen platform, without any additional costs from Presssac.
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures.
\n \t- Dimensions: 93 x 65 x 28 mm (approx)
\n \t- Packaging unit: single
\n
\n
\nDownload product sheet\nWireless smart sensor and connected technology
\n\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\nLearn more about Pressac's sensor technology\nEasily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\nLearn more about accessing and integrating sensor data" EnOcean Smart Repeater https://www.enocean-alliance.org/power-over-ethernet-enocean-repeater/ https://www.enocean-alliance.org/wp-content/uploads/2021/06/SmartRepeater-2.jpg REPEATER_868_UK_[S]-[B] Pressac Gateway & Building Management Systems, Gateway: TCP/ IP, Repeater, Wireless Sensors 868MHz (ASK): EU (and potentially others e.g. Non-EU Europe, China, Singapure?) All EEPs All EEPs Certified Level 3
533788 "Measure energy consumption at a circuit, zone or machine level, in real time
\nPressac's wireless current sensors (CT) measure the alternating current (AC) and report the average of 5 measurements every 30 seconds.\n\nThe small, energy-harvesting devices use ultra-low power wireless and battery-less technology making them easy to install and very low maintenance. They simply clip around a cable and the wireless transmitter attaches outside the panel for reliable wireless data transmission. They can easily be fitted inside a machinery panel, distribution panel or other suitable location.\n\nWireless, self-powered current sensors\nThey simply clip around a cable and measure the electrical current, so there?s no interruption to the electrical supply\n\nReports current every 30 seconds\nSensors measure AC current (50Hz or 60Hz) and reports average of 5 measurements every 30 seconds\n\nAccess real-time data locally or in the cloud\nUsing our Smart Gateway, data is encrypted and sent locally or to your chosen cloud platform via MQTT\nFeatures
\n\n
\n \t- Sensors measure AC current (50Hz or 60Hz). Reports average of 5 measurements every 30 seconds
\n \t- Single-channel (single-phase) clamps measure the electrical current flowing in a single cable, while three-channel (3-phase) clamps measure current in 3 individual cables. Normally you will find single-phase systems in, for instance, households and office buildings. In the industry and for heavier machines, three-phase electric power is typically used.\n
\n \t- One channel measurement ranges:\n1A?60A (accuracy +/- 0.1A or 2%, whichever is greater)\n2A?200A (accuracy +/- 0.1A or 2.5%, whichever is greater)
\n \t- Three channels measurement ranges:\n1A?60A (accuracy +/- 0.1A or 2%, whichever is greater)\n2A?200A (accuracy +/- 0.1A or 2.5%, whichever is greater)\n2A-600A (accuracy +/- 1A or 3%, whichever is greater)
\n
\n \n \t- Self-powered using ultra-low energy from the measured conductor, so there?s no need for batteries or wiring
\n \t- Clamps simply clip around cables with no interruption to electrical supply. The wireless transmitter attaches outside the panel for reliable wireless data transmission
\n \t- Transmit data wirelessly and securely ? using AES-128 encryption ? via EnOcean wireless protocol, which uses internationally approved, licence-free ISM bands\n
\n \t- 868 MHz for Europe (RED)
\n \t- 902 MHz for North America (FCC) and Canada (IC)
\n \t- 928 MHz for Japan (ARIB specification)
\n
\n \n \t- EnOcean Equipment Profile (EEP): D2-32-00, D2-32-02
\n \t- No recurring fees. Access the data through your chosen platform, without any additional costs from Presssac.
\n \t- Manufactured in the UK to high-quality and high-safety specifications, they are subject to rigorous testing procedures.
\n \t- Packaging unit: single
\n
\n
\nDownload product sheet\nWireless smart sensor and connected technology
\n\n \t- Quick to install and set up
\n \t- Ultra-low power, energy-harvesting
\n \t- Secure licence-free transmission
\n \t- Interoperable and scalable
\n \t- Highest quality and compliance
\n
\nLearn more about Pressac's sensor technology\nEasily access and integrate real-time desk occupancy sensor data
\nPressac's technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that?s right for you.\n\n \t- Access your sensor data in a spreadsheet
\n \t- Visualise sensor data using Node-RED
\n \t- Integrate live data into any software or IoT platform
\n \t- Feed sensor data into existing building management systems
\n \t- Connect sensors directly to EnOcean controllers
\n
\nLearn more about accessing and integrating sensor data" EnOcean Wireless Single Channel CT Clamp https://www.enocean-alliance.org/wireless-single-channel-ct-clamp-pressac-3/ https://www.enocean-alliance.org/wp-content/uploads/2021/07/1ChanCT-Clamp_v2-1.jpg CTV3_868_1CH_060A, CTV3_868_1CH_200A Pressac Metering Sensor 868MHz (ASK): EU (and potentially others e.g. Non-EU Europe, China, Singapure?) D2-32-00 Certified Level 2