EnOcean Wireless Single Channel CT Clamp

Measure energy consumption at a circuit, zone or machine level, in real time Pressac’s wireless current sensors (CT) measure the alternating current (AC) and report the average of 5 measurements every 30 seconds. The small, energy-harvesting devices use ultra-low power wireless and battery-less technology making them easy to install and very low maintenance. They simply

EnOcean Wireless Three Channel CT Clamp

Measure energy consumption at a circuit, zone or machine level, in real time Pressac’s wireless current sensors (CT) measure the alternating current (AC) and report the average of 5 measurements every 30 seconds. The small, energy-harvesting devices use ultra-low power wireless and battery-less technology making them easy to install and very low maintenance. They simply

EnOcean Wireless CO2, Temperature and Humidity Sensor

Measure the indoor air quality in each room or zone Our wireless multi-sensors measure and monitor the carbon dioxide (CO2) levels, ambient temperature and relative humidity in a room or zone. The small wireless CO2 sensors simply stick onto the wall and are solar-powered using ambient room light, making them easy to install and very low maintenance.

USB 400J – USB Gateway

USB 400J is a USB stick gateway which connects PC’s, consumer devices, DSL boxes and other USB master devices to the world of EnOcean based wireless products. The USB stick gateway is equipped with the TCM transceiver gateway module. It provides bidirectional EnOcean radio and bidirectional serial interface via USB. Radio messages are sent and

STM 400J – Bi-directional Wireless Sensor Module

STM 400J features an energy harvesting interface for the implementation of self-powered products. The minimal standby power consumption makes it especially suitable for energy harvesting wireless solutions such as bidirectional temperature sensors, sensors in building services and innovative actuators. Technical information and more detailed infromation on: STM 300 (868 MHz for Europe) STM 300U (902

STM 429J – Wireless Sensor Module

The extremely power saving RF transmitter module STM 32x/ STM 429J of EnOcean enables the realization of wireless magnet contact sensor. Powered by a solar cell it works absolutely maintenance-free. Technical information and more detailed infromation on: STM 320 (868 MHz for Europe) STM 329 (868 MHz for Europe) STM 320U (902 MHz for North

EMCSJ – Magnet Contact Sensor (928 MHz)

EMCSA is an energy-harvesting wireless magnet contact sensor for EnOcean systems. Powered by a solar cell, EMCSA works absolutely maintenance-free. An integrated energy store allows operation for several days in total darkness. In dark surroundings, a coin cell battery can be retrofitted. The small housing can easily be mounted to windows or door frames or

EMSIJ – IoT Multisensor (928 MHz)

The EnOcean multisensor enables the realization of energy harvesting wireless sensors communicating based on the EnOcean radio standard. Key applications are wall-mounted or equipment-mounted sensor applications for the measurement of temperature, humidity, illumination or acceleration / orientation.

STM 550J – Multisensor Module (928 MHz)

STM 550 enables the realization of energy harvesting wireless sensors communicating based on the EnOcean radio standard. Key applications are wall-mounted or equipment-mounted sensor applications for the measurement of temperature, humidity, illumination or acceleration / orientation.

EOSWJ – Wall Mounted Occupancy Sensor (928 MHz)

Wall-Mounted Occupancy Sensor is wireless and self-powered making them one of the most costeffective ways to control energy-use in unoccupied rooms. The sensor harvests solar energy from indoor light and uses radio frequency technology to communicate wirelessly with other EnOcean-enabled devices, setting back temperature and turning off lights and electrical loads when it detects that