Navigan Wireless Commissioner NWC 300U

With Navigan Wireless Commissioner you can simplify installation of building automation projects using EnOcean’s energy harvesting technology, and easily configure EnOcean controllers. It can be used to define link tables, change parameters and settings, and to edit and store projects. Currently with NWC 300x the following EnOcean finished products are supported: EISMx, EPSMx, LEDRx, and

HVAC Setback Module – EHSM (OEM)

The HVAC Setback Module provides an extraordinarily simple, highly efficient means for switching HVAC systems between normal operation and a pre-configured setback mode. The module features two (2) buttons with LED indicator lights that are used to configure or manually control the device. The setback module is easy to install and connects to the HVAC

Plug-in Switch Module – EPSM (OEM)

Controlling lamps and electronics in any room is simple when you use the Plug-In Switch Module. The module uses radio frequency technology to communicate wirelessly with other EnOcean-based devices and provide convenient control of lighting and electronic appliances. Link the module to a switch or occupancy sensor for convenient wireless control. EPSM is supported by

LED Zone Controller 0-10V – LEDD (OEM)

The LED controller LEDD uses wireless technology to communicate with other self-powered EnOcean-based products and provides an amazingly simple solution for dimming control of LED lighting. It is directly supplied from the auxiliary 12V supply output of a connected LED driver. The compact size enables flexible installation inside of or next to electrical boxes and

LED Relay Zone Controller 0-10V – LEDR (OEM)

The LED relay zone controller uses wireless technology to communicate with other self-powered EnOceanbased products and provides an amazingly simple solution for dimming control of LED lighting. The compact size enables flexible installation inside of or next to electrical boxes and fixtures so it can be easily wired out of sight using standard wiring practices.

Light Level Sensor – ELLS (OEM)

EnOcean Light Level Sensor measures and reports the level of available natural light. Used in conjunction with suitable controllers such as EnOcean LEDR and LEDD, it enables implementation of energy saving daylight harvesting control systems.

Ceiling Mounted Occupancy Sensor – EOSC (OEM)

Ceiling Mounted Occupancy Sensor is wireless and self-powered making them one of the most costeffective ways to control energy-use in unoccupied rooms. The sensor harvests solar energy from indoor light and uses radio frequency technology to communicate wirelessly with other EnOcean-enabled devices, setting back temperature and turning off lights and electrical loads when it detects

Wall Mounted Occupancy Sensor – EOSW (OEM)

Wall-Mounted Occupancy Sensor is wireless and self-powered making it one of the most costeffective ways to control energy-use in unoccupied rooms. The sensor harvests solar energy from indoor light and uses radio frequency technology to communicate wirelessly with other EnOcean-enabled devices, setting back temperature and turning off lights and electrical loads when it detects that

Wireless Door/Window Sensor – EDWS (OEM)

The Door/Window Sensor can be easily mounted on any standard door or window frame to enable occupancy based control of lighting, HVAC and miscellaneous electric loads. The sensor uses radio frequency technology to communicate wirelessly with other EnOcean-based devices whenever it detects that a door or window has been opened or closed. For maximum efficiency

Wireless Switch – ESRP/ EDRP (OEM)

Self-powered wireless controls are simple to install. The Single and Double Rocker Pads use EnOcean energy harvesting technology to communicate wirelessly with other wireless devices and provide convenient control of lighting, temperature and miscellaneous electric loads.