SensHub EnOcean Sensor Gateway

The Lehigh SensHub is an EnOcean to Lehigh control systems gateway which acts as an interface between EnOcean wireless sensors and Lehigh’s Solitaire, Impress DMX or E-Flex lighting control systems. The SensHub connects to the Impress or FlexNet networks. SensHub Models: SensHub for E-Flex (H10023) SensHub for Solitaire/DTM (H10024) SensHub Repeater (H10026)

Mobile App Gateway

The ILLUMRA Mobile Commissioning System includes an ILLUMRA Mobile Commissioning Gateway and the Scan & Link app, and is designed to support the installation of wireless controls from the planning phase to the completion of a project, and supports adjustments to behavior and zoning even after a project is complete. Download the app on your iOS or Android smartphone.

BACnet Gateway

The ILLUMRA BACnet Gateway is your network’s intelligent wired and wireless controller; a wireless transceiver for 902MHz EnOcean and Zigbee devices. It is programmable for more precise and autonomous local control. It is also a complete and automated BACnet gateway. The gateway has an aesthetic look similar to a router, allowing for in-room deployment. Points visible through BACnet® Wireless control

8 Channel Low Voltage Controller

The 8 Channel Low Voltage Controller connects wireless light switches and sensors to new or existing control systems. This low voltage on/off controller responds to up to 80 different transmitters and provides 8 output channels (dry contact or 8-30V for relay and contractor applications). The outputs can be programmed as either momentary or maintained contacts.

Window/Door Sensor

The ILLUMRA Wireless Window/Door Sensor maximizes the energy savings of heating and air conditioning systems by wirelessly providing the open-or-closed status of windows and doors. The sensor uses a magnet contact switch that is powered by a solar cell and communicates with a wide variety of ILLUMRA products. Energy waste can be reduced by 20

High Bay Occupancy Sensor

The ceiling-mounted High Bay Occupancy Sensor allows fine-tuned control of lights, temperature, and other loads by signaling when a space has been unoccupied for a set period of time. Because the sensor is wireless, there is no need to run additional wiring. Installation can be completed in a manner of minutes. The sensor is self-powered by

Wall Mount Occupancy Sensor

The ILLUMRA Wall-Mounted Occupancy Sensor covers room or walk ways with excellent motion detection performance.

Ceiling Mount Occupancy Sensor

Ceiling-Mount Motion Sensors sense motion over a 360 degree coverage area.

Daylighting Sensor

ILLUMRA Wireless Battery-Free Light Sensors save time, energy, and money by avoiding costly and time-consuming installation of hardwired daylighting controls. The light sensor saves energy by lowering the output of artificial light when daylight is present in a room, saving up to 60 percent of the energy. The wireless sensor works in conjunction with wireless

Constant Voltage PWM Dimming Controller

ILLUMRA Constant Voltage PWM Dimming Controller delivers 65,000 PWM dimming steps to provide ultra smooth dimming performance through all light levels. These tiny dimmers are 1/2 to 1/4 the size of other LED dimmers and overcome a major challenge faced by traditional LED dimmers; the devices eliminate the issue of choppiness at low dim levels.