Omnio DIN rail mounted blind actuator 4-channels REGJ12/04

The Omnio DIN rail mounted blind actuator 4-channels REGJ12/04M is a device to control 230 V~ tubular motors of blinds, sun blinds, awnings, sliding gates or garage doors. Its eight potential free interlocked outputs are able to regulate four drives and these can be actuated from up to 50 Omnio radio transmitters. This allows the

Omnio flush-mounted blind actuator 1-channel UPJ230/12

The Omnio flush-mounted blind actuator 1-channel UPJ230/12 is a device to control 230 V~ tubular motors of blinds, sun blinds, awnings, sliding gates or garage doors. Its two potential free interlocked outputs are able to regulate one drive and can be actuated from up to 50 Omnio radio transmitters. This allows the exact positioning of

Omnio universal cable dimmer 1-channel KD230/10

The Omnio universal cable dimmer 1-channel KD230/10 is a device for dimming LED luminaires and other electrical loads. Thanks to automatic load recognition (R/L/C) the dimmer selects the right operating mode as well as the ideal dimming curve for the connected light source. Up to 50 Omnio radio transmitters can be programmed. Each transmitter can

Omnio flush mounted universal dimmer 1-channel UPD230/10

The Omnio flush mounted universal dimmer 1-channel UPD230/10 with extension input is a device for dimming LED luminaires and other electrical loads. Thanks to automatic load recognition (R/L/C) the dimmer selects the right operating mode as well as the ideal dimming curve for the connected light source. Up to 50 Omnio radio transmitters can be

Vacuum leak detector Eurovac

Application Class I vacuum type leak detector according to EN 13160 for safe monitoring of double-walled tanks and single-walled tanks with inner lining for the storage of water-polluting liquids with a flash point > 55 °C as well as AdBlue® (urea solution 32.5 %) according to DIN 70070. The broad voltage range (AC 100–240 V)

CO2 Sensor F

Application For continuous monitoring of the carbon dioxide (CO2) concentration in the ambient air. Application in rooms in which many persons work, study or live and where carbon dioxide levels may consequently be elevated. High concentrations of carbon dioxide in the ambient air reduce the ability of persons to concentrate and perform. Ideal for educational

Temperature and Humidity Sensor FTM TF

The temperature and humidity sensor FTM TF cyclically measures the ambient temperature as well as the air humidity and sends a wireless EnOcean message. Mounting by means of simply placing, gluing, screwing or fixing with cable ties. An integrated photovoltaic cell supplies the required power. An optional battery can be used for application in darker

Temperature Sensor FTM T

Application Determination of the ambient temperature and air humidity at a defined location. Description The temperature sensor FTM T transmits the current ambient temperature via the integrated EnOcean® wireless module to the AFRISOhome gateway. The temperature and humidity sensor FTM TF also transmits the value of the current air humidity. Based on the event message,

Universal Radio Transmitter FTM

Application Monitoring of the switching states of voltage-free contacts. In addition, transmission of ambient temperature. Description The universal wireless transmitter can integrate any device with a voltage-free contact into a building automation system. Examples comprise the alarm relays of heating systems or status messages of alarm systems. The voltage-free contact is supplied with voltage by

alphaEOS DRIVE

The wireless actuator replaces the thermostat at the radiator and enables optimal heating control through via alpha.base.